Beli Tekan Multi-Tahap bekas (12.150)

Kondisi: sangat baik (bekas), panjang total: 6.000 mm, lebar total: 2.400 mm, tinggi total: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on level, paved surfaces for internal plant transport. Multiple Trailer Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: 16 t at 6 km/h with uniformly distributed load (surface load) on the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Dimensions approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covered with softwood planks, all-round edge protection. Steering: Four-wheel stub axle steering, tow bar can be raised, removed, and reversed from front to rear; hitch height on towing vehicle approx. 320 mm (other hitch heights permitted only upon notification), towing eye according to DIN 74054, Dm 40 mm, tow bar safety lock according to accident prevention regulations (UVV). Fodpfxjxrtdqo Alyjgf Chassis: Both axles steered, elastic solid rubber tires approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 Ultramarine Blue. Additional Equipment: - 2 lashing bars made of round steel vertically welded into the outer frame on each longitudinal side - Double-acting wheel chock with holder and chain.

Kondisi: sangat baik (bekas), panjang total: 10.000 mm, lebar total: 2.400 mm, tinggi total: 975 mm, warna: biru, Operating conditions: The trailer is designed for use on level, paved roads within internal company premises. Multiple trailer operation: The trailer components are not (without a coupling device) designed for operation in combination with multiple trailers. Payload: 32 t at 6 km/h with evenly distributed load (surface load) on the loading platform between the axles. Point or line loads are only permissible upon notification. Loading platform: Dimensions approx. 10,000×2,400 mm, loading height approx. 975 mm, platform covering with softwood planks, all-round edge protection. Steering: Front turntable steering, tow bar adjustable in height and removable, coupling height on towing vehicle approx. 350–500 mm, towing eye according to DIN 74054, diameter 40 mm, tow bar safety catch according to accident prevention regulations (UVV). Running gear: 2 steered and 2 non-steered pendulum axles, wheels with solid elastic rubber tires approx. 450 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Fgsdpoxrtkwofx Alyjf Paint finish: Top coat RAL 5002 ultramarine blue. Additional equipment: On each longitudinal side, 2 lashing bars made of round steel welded horizontally into the outer frame.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 60.000 kg, Perlengkapan: Pemeriksaan keselamatan UVV, kabin, Sewa dan pembelian dimungkinkan Fgjdoyrf T Eepfx Alyef

Kondisi: sangat baik (bekas), panjang total: 6.000 mm, lebar total: 2.400 mm, tinggi total: 750 mm, warna: biru, Operating Conditions: The industrial trailer is designed for use on level, paved surfaces within internal company transport. Train Operation: The trailer components are not designed (without a tow bar) for combined operation with multiple trailers. Payload: The industrial trailer can transport loads of up to 25 t at 6 km/h, provided the load is evenly distributed (distributed surface load) on the loading platform between the axles. Point or line loads are only permitted upon prior notification. Base Frame: The base frame of the industrial trailer is manufactured from a robust welded construction made of section steel. Loading Platform: Dimensions are approx. 6000 x 2400 mm; loading height approx. 750 mm. The platform is fitted with softwood planks and surrounded by an all-round edge protector. Steering: Four-wheel stub axle steering, tow bar can be raised, removed, and switched from front to rear; hitch height at towing vehicle approx. 285 – 775 mm (other hitch heights only available upon request); towing eye to DIN 74054, 40 mm diameter, drawbar drop protection according to UVV regulations. Chassis: Both axles of the industrial trailer are steered. Elastic solid rubber tyres approx. 559 x 356 mm; wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Fedjxrtb Nepfx Alyjgf Additional Equipment: Each of the two longitudinal sides of the industrial trailer features two upright lashing bars made of round steel welded into the outer frame sections. Rental or sale Europe-wide.

Kondisi: sangat baik (bekas), panjang total: 4.100 mm, lebar total: 2.100 mm, tinggi total: 560 mm, warna: biru, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on level, paved surfaces for internal company transport. Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permissible upon notification. Main Frame: Robust welded construction made of profile steel. Fgodpfxoxrtgfe Alysf Loading Platform: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, fitted with phenolic plywood. Deflectors on the front ends of the frame. Steering: Four-wheel axle steering, drawbar can be raised, but not repositioned or removed. Drawbar drop safety device in accordance with accident prevention regulations (UVV). Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint Finish: Top coat RAL 5002 ultramarine blue. Other Features: - Collision protection on the front ends of the frame made of teardrop-shaped half shells. - All-round slip guard approx. 25 mm high - Lateral underrun protection at diagonal bar height - Pin coupling with captive bolt, spring-secured pin, diameter 30 mm, at the rear side - Double-acting wheel chock with chain - Two reflectors at the rear - Prepared for roof structure

Kondisi: hampir baru (bekas), panjang total: 6.000 mm, lebar total: 2.500 mm, tinggi total: 1.012 mm, warna: biru, Operating Conditions: The heavy-duty trailer is designed for use on level, paved roadways within in-plant transport operations. Combined Operation: The trailer components are not (without a towing hitch) intended for multiple trailer combination operation. Payload: Fgjdpjuf Rw Tefx Alysf 60 t at 6 km/h with evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permissible upon notification. Main Frame: Robust welded construction made from profile steel sections Loading Platform: Dimensions approx. 6000 x 2500 mm, loading height approx. 1012 mm, platform covering with softwood planks, all-around recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar tiltable, removable, and switchable from front to rear, coupling height at the towing vehicle approx. 650 mm (other coupling heights permitted only upon notification), tow eye according to DIN 74054 diameter 40 mm, tie rods with adjustable ball joints, diagonal or pull rods adjustable and fitted with maintenance-free joint bearings, drawbar drop safety device conforms to accident prevention regulations (UVV) Chassis: 4 steered pendulum axles, 2 steered axle lines to ensure uniform wheel load distribution, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint Finish: Top coat RAL 5002 ultramarine blue Additional Equipment: - Optional: Two-line pneumatic braking system acting on 4 wheels, slope < 4%. Separate parking brake via spring-type cylinders, also acting on 4 wheels. - On each longitudinal side, 2 lashing or crane eyes made from round steel, welded horizontally into the outer beams; crane eyes to be used only when the trailer is unloaded - Inner turning radius approx. 2100 mm - Outer turning radius approx. 5500 mm - Drawbar approx. 1500 mm long For rent or sale EU-wide.

Kondisi: hampir baru (bekas), panjang total: 5.000 mm, lebar total: 2.400 mm, tinggi total: 930 mm, warna: biru, Operating Conditions: The trailer is designed for use on level and paved surfaces within internal company premises. Towing Vehicle Type Designation: Unknown Cargo: Unknown Multi-Trailer Operation: The trailer components are not designed (without trailer coupling) for operation in a train with multiple trailers. Payload: Fjdexrtluspfx Alyogf 40t at 6 km/h with evenly distributed load (area load) between the axles on the loading platform. Point or line loads are only permitted upon notification. Base Frame: Sturdy welded construction made of profile steel sections Loading Platform: Dimensions approx. 5000 x 2400 mm, loading height 930 mm, platform covering with timber planks, all-round edge protection Steering: All-wheel steering on 4 oscillating axles, drawbar height-adjustable, removable and reversible (front to back), coupling height on towing vehicle approx. 670 mm (other coupling heights permitted only upon notification), towing eye according to DIN 74054 diameter 40 mm, track rods with adjustable ball joints, diagonal or tensile rods adjustable and fitted with low-maintenance spherical bearings, drawbar safety catch compliant with accident prevention regulations (UVV) Chassis: 4 steered oscillating axles (2 steered axle pairs) to ensure even load distribution on the wheels, wheels with solid rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 Ultramarine Blue Additional Equipment: 2 lashing bars on each longitudinal side For rent or sale EU-wide.

Tahun pembuatan: 2002, Kondisi: sangat baik (bekas), MULTI-PRESS MP.610 6 DIES Mechanical and electronic components in perfect condition 12x80 mm MAXIMUM CUTTING LENGTH 105 mm 170 ppm YEAR 2002 FULLY OPERATIONAL Fsdpfoh Rkhnex Alysgf AVAILABLE IN SPAIN MORE PHOTOS AND VIDEOS AVAILABLE

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 63.040 h, Fungsionalitas: berfungsi sepenuhnya, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! RINCIAN TEKNIS Konfigurasi Mesin Peluncur linear atas: 2 buah Unit frais: 1 buah Unit pengeboran melintang: 2 buah Spindel depan yang tetap: 1 buah Unit Pemrosesan Drum 6: Hanya dapat digerakkan pada sumbu X Posisi depan 1: Spindel yang tetap dan dapat berputar, hanya dapat digerakkan maju dan mundur Posisi depan 2 hingga 4: Spindel yang dapat dikendalikan sepenuhnya dan dapat berputar Posisi depan 5: Sumbu pemotongan internal untuk pemrosesan kontur dan radius internal Posisi depan 6: Spindel yang digerakkan dengan peluncur pemrosesan di bagian belakang dan dua alat, yang dapat digerakkan ke arah sisi tampilan Peralatan Elektronik Lengkap Penggerak tambahan yang dapat disambungkan secara elektronik pada posisi depan dan enam peluncur drum RINCIAN MESIN Jam operasi: 98.119 jam Jam spindel: 63.040 jam PERALATAN Konveyor serpihan Unit pendingin bertekanan tinggi Fgodpjzrgnpsfx Alyef Pemuat batang Unit frais Dua unit pengeboran melintang Collet Suku cadang Komponen elektronik untuk lemari kontrol Spindel depan yang tetap baru

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 157090207, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 180 t, panjang langkah: 325 mm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! RINCIAN TEKNIS Gaya tekan: 180 ton Tekanan hidrolik maksimum: 600 bar Langkah silinder: 325 mm Bukaan: 325 mm RINCIAN MESIN Pengaturan: Pengaturan elektronik dengan panel kontrol/CNC Tegangan: 400 V / 50 Hz Fgedjznmb Ispfx Alyof Model: Model industri PERALATAN Kabinet pengaman tertutup Sistem pres hidrolik Mesin pres pelat pemanas Mesin pres pembentukan

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1986, nomor mesin/kendaraan: 7520536, tegangan masuk: 110 V, arus masuk: 20 A, frekuensi input: 60 Hz, Mesin penempa logam untuk dijual, kondisi berfungsi dengan baik. Fgsdpfx Ajzrkumolyef

Kondisi: baru, Bending tools/punches for Trumpf press brake H256mm, L500mm, L550mm in segments Fjdeiimz Rspfx Alysgf

Kondisi: baru, Press brake tools/punches for Bystronic press brake P5 RFA style, 30 degrees, H250mm, R1.0mm Fgodpfxjiim Dwe Alysf Flexible lengths: L500mm/508mm/515mm; L550mm in segmented sections

Kondisi: baru, Press brake punch for Amada/Promecam 30-degree, radius 0.6 mm, height 104 mm, length 835 mm, Fgsdpjin I Dtofx Alyef length 835 mm, sectioned

Kondisi: baru, 85 degree press brake punch for Amada/Promecam R2.0mm, H145mm, L835mm, Fgodpfxoin I E He Alyof L835mm sectioned

Kondisi: baru, Sonder-Umformwerkzeug Fodpfx Aeiq Di Holyegf

Kondisi: baru, Punches and dies for EHT press brake Fedpfx Alslp Hnzsysgf

Kondisi: baru, Trumpf 标准折弯机模具，86°，R1.0mm，H157mm，最大承载 40 吨/米，长度 500mm & 550mm，分段设计。 Fgsdpfotw Uxbox Alyof

Kondisi: baru, EHT Pressbiegemaschinen-Stempel Fsdpsvlwn Rofx Alysgf 86° H220mm R0,5mm Segmentierte Längen

Kondisi: baru, 88 degree press brake punch for Amada/Promecam, R0.6mm, H120 mm, L835mm, L835mm sectioned Fsdpein I D Eofx Alyegf

Kondisi: baru, Punches and dies for EHT press brake Fgsdsiq Dnkopfx Alyof

Kondisi: baru, 88° H145 mm R0,2 mm Kompatibel mit Amada/Promecam/Pressen nach europäischem Standard (Abkantpressen) Fgodpfxoqxrpno Alyef

Kondisi: baru, V65mm/V80mm dies Fjdpfelkdczex Alysgf Für Trumpf, Bystronic

Kondisi: baru, Large gooseneck punch H250/260mm/H280mm for Amada/Promecam/Durma/Baykal/Ermaksan/MVD/Denner/SBD L125/250mm Fgjdjiim Ayjpfx Alyjf

Kondisi: baru, AMADA/Promcam - centrally guided 1V press brake dies Fodpfx Asin I Hrolysgf