Beli Torna 765 bekas (224)

Kondisi: baik (bekas), Clamping plate with T-slots, plate field, welding table, plate boring mill, T-slot plate - Table width: 800 mm - Table length: 1000 mm - Table thickness: 35 mm - Table height: 765 mm - Plate: Solid cast steel - Slot width: 22 mm - Slot spacing: 100 mm - Plate underside: circular T-slot Ø 700 mm M12 - Features: with bench vice - Overall dimensions: 1300/1050/H1000 mm Nedpfsb Ta Nrjx Aivjlg - Weight: 472 kg

Kondisi: baik (bekas), Pneumatic cylinder, air cylinder, pneumatic ram, air ram -Manufacturer: Festo, standard cylinder type DNU-80- Nsdpjgrzuijfx Aivelg -Stroke: 500 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm/M20x1.5 -Dimensions: 765/95/H95 mm -Weight: 7 kg

Kondisi: bekas, Vötsch Model: VCS 7034-5 Climatic Test Chamber (Water-cooled) Test Chamber Volume: 335 liters Performance Specifications for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: K ±0.1 to ±0.5 Spatial Temperature Deviation: K ±0.5 to ±2.0 Temperature Gradient: 1 to 4 Rate of Change: - Cooling: 6.7 K/min - Heating: 6.8 K/min Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature Calibration Points: +23°C and +80°C Performance Specifications for Climatic Testing: Temperature Range: +10 to +95°C Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1.0 K Temperature Gradient: 1 to 2 K Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Dew Point Range: -3 to +94°C Heat Compensation: 400 W Climatic Calibration Values: +23°C / 50% r.h. and +95°C / 50% r.h. Test Chamber Internal Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated Power: 10 kW Rated Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerants: R-404A / R-23 Important Information for Buyer Safety! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and errors in technical specifications and information!) We are happy to answer any further questions by phone. Nljdpfxezg Tx Re Aivjg

Kondisi: baik (bekas), Vötsch Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance Data for Temperature Testing: Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Njdpfszg Twgjx Aivelg Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance Data for Climate Testing: Temperature range: +10°C to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3°C to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber internal dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Power supply: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R-404A / R-23 Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further inquiries, feel free to contact us by phone.

Kondisi: baik (bekas), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 5.0 K/min Temperature change rate heating: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: width 580 mm, depth 765 mm, height 750 mm Njdpfx Aezg Tp Neivjlg External dimensions: width 870 mm, depth 1595 mm, height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW; Rated current: 21 A Sound level at 1m distance (free-field measurement):

Kondisi: baik (bekas), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 5.0 K/min Temperature change rate heating: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: width 580 mm, depth 765 mm, height 750 mm External dimensions: width 870 mm, depth 1595 mm, height 1775 mm Test chamber volume: 335 liters Nodpfezg Tp Aex Aivslg Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW; Rated current: 21 A Sound level at 1m distance (free-field measurement):

Kondisi: baik (bekas), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Nlsdpfszg Tpiox Aivog Temperature change rate cooling: 5.0 K/min Temperature change rate heating: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: width 580 mm, depth 765 mm, height 750 mm External dimensions: width 870 mm, depth 1595 mm, height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW; Rated current: 21 A Sound level at 1m distance (free-field measurement):

Kondisi: sangat baik (bekas), Vötsch VC³ 0034 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Machine type: Climate Test Chamber / Climatic Chamber Test chamber volume: approx. 335 liters For sale is a used climate test chamber by Vötsch for temperature and climate testing in laboratory, research, development, and quality assurance. Technical Data Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Temperature range: -10 °C to +90 °C Humidity range: 10 to 98 % RH Dew point range: +4 °C to +89.5 °C Temperature uniformity: ±0.5 to ±1 K Temperature deviation: ±0.1 to ±0.5 K Heating rate: approx. 1 K/min Cooling rate: approx. 0.3 K/min Max. heat compensation: approx. 200 W Refrigerant: R404A Charge: 0.6 kg ND max.: 25 bar g HD max.: 25 bar g Power supply: 230 V / 50 Hz Nominal power: 2.3 kW Nominal current: 10 A Protection class: IP54 Weight: approx. 490 kg Equipment SIMPAC control system Temperature and humidity regulation Stainless steel test chamber Ethernet, USB, RS232, RS485/422 Test item protection function Cable ports Fields of Application Climate testing Temperature testing Material testing Electronics testing Nedpozgb Awofx Aivelg Quality assurance Research and development Scope of Delivery Vötsch VC³ 0034 climate test chamber Accessories as shown in the pictures Condition Used Visual condition as per photos For the safety of our customers, the offered climate chambers are inspected before delivery, filled if necessary with legally compliant refrigerant, subjected to a leak test, and handed over with a documented test run. Technical specifications subject to change and prior sale excepted.

Kondisi: sangat baik (bekas), Here we offer a Weiss temperature chamber. Weiss temperature test chamber with S!MCON / 32 control, water-cooled (Refrigerant converted to R-452A) Control unit: "Touch panel" All control and operation commands can be triggered easily by touching the function symbols on the touch panel. Levelling Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with cable ports on both the right and left sides. Measurement lines and test equipment can be routed into the test chamber through these ports. Cable ports included as standard: R1: nominal width 125 mm L1: nominal width 50 mm Test chamber volume: approx. 335 litres Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Technical data for temperature testing: - Temperature range: -42 to +180 °C - Temperature deviation over time (center of usable space): ± 0.1 to ± 0.5 K - Temperature deviation spatially: ± 0.5 to ± 1.5 K - Temperature change rate: Heating: 3.2 K/min Nljdpfxezgbkhe Aivog Cooling: 4.0 K/min - Maximum heat compensation: 2300 W Technical data for operation: - Test chamber lighting: Halogen bulb 2x24V, 50W - Nominal voltage: 3/N / PE AC 400 V ±10% 50 Hz - Rated current: 14 A - Rated power: 4.1 kW - Fuse (to be provided by customer): 16 A (slow-blow) - Sound pressure level: measured at 1m in front, at 1m height: 56 dB(A) - Refrigerant: R-452A - Weight: 515 kg - Type: WT3-340/40 For your safety as a buyer, the following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Here we offer a Weiss climate test chamber. Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Temperature Testing Volume: 335 liters Test Chamber Dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: –42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature uniformity (spatial): ± 0.5 to ± 1.5 K Climate Testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity (spatial): ± 0.5 to ± 1 K Humidity deviation over time: ± 1 to ± 3 % RH Voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 4.1 kW Nominal current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight: approx. 515 kg For your safety as a buyer, please note the following information! The following work will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Nsdpozgavvefx Aivslg 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run will be performed on the chambers. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) For further questions, feel free to contact us by phone.

Kondisi: bekas, Tahun pembuatan: 2023, Mesin demonstrasi baru! Harga daftar: €93.317 (netto). Mesin dasar lengkap dalam konfigurasi standar untuk pengeboran dan pembuatan alur: Data teknis terperinci, lihat lembar data untuk ProTec Tipe 0571. Unit pemrosesan dengan: PowerBlock dengan 21 spindel dan 1 gergaji alur - 13 spindel bor vertikal - 6 spindel bor horizontal pada sumbu Y - 2 spindel bor horizontal pada sumbu X - 1 unit alur pada sumbu Y. Sumbu pengeboran 4 arah pada sumbu Y. Ukuran dan berat benda kerja: - Lebar benda kerja (X): min. 60 mm / maks. 1000 mm - Ketebalan benda kerja (Z): min. 6 mm / maks. 60 mm - Panjang benda kerja (Y): min. 250 mm dalam mode kontinu, maks. 5600 mm panjang benda kerja yang dapat diprogram dalam perangkat lunak - Berat benda kerja: maks. 75 kg. Unit pemotong Profit HSK63F dengan majalah 3 posisi untuk penggantian alat otomatis, motor 5,5 kW (S1), 1000-20000 RPM dengan pengubah frekuensi, putaran searah jarum jam dan berlawanan arah jarum jam, untuk dudukan alat HSK63F dengan collet 462E/OZ25, panjang pahat hingga 130 mm. Informasi: Unit pemrosesan MultiUnit dengan PowerBlock dengan 21/23 spindel, gergaji alur, dan unit pemotong Profit opsional. Daya sambungan 12 kVA, arus nominal 17,5 A, sekering 32 A, tegangan 400 V, 50 Hz, 3 fase (tanpa trafo), jaringan TN atau TT. Sambungan pneumatik 7 bar (102 psi). Pada mesin: konektor kopling (kopling cepat) ¼, DN7,2, kuningan, dari pabrik. Untuk mesin: kotak kopling (kopling cepat) ¼, DN7,2, kuningan, dari sisi pelanggan. Saluran akses, diameter dalam selang 12 mm (min.). Kebutuhan udara terkompresi, konsumsi udara berkelanjutan sekitar 230 L/min (sekitar 3,8 L/detik) (udara terkompresi). Sambungan penghisap 3x nosel penghisap, diameter 80 mm. Kecepatan penghisapan 30 m/detik - diukur pada nosel penghisap. Kebutuhan penghisapan min. sekitar 2500 m3/jam min. Berat mesin sekitar 1650 kg (dengan opsi!). Lokasi pemasangan mesin: Pada prinsipnya, ProTec dapat dipasang secara permanen ke lantai dengan sekrup. Lantai beton (atau fondasi) dianggap sebagai lantai (setidaknya pada 4 tepi mesin/kaki mesin). Perlengkapan: Protec 571 Profit HSK63F dengan majalah 3 posisi, meja rol 765 mm (sumbu Y), dapat dilipat, untuk bagian depan mesin, lebar 500 mm, meja rol 765 mm (sumbu Y), dapat dilipat, untuk bagian belakang mesin, lebar 500 mm. Penghenti bantu 600 mm dengan rol terintegrasi untuk meja rol. Perangkat keamanan tambahan melalui tirai bilah. Persyaratan untuk pemotongan horizontal untuk sistem Lamello P (tanpa alat untuk sistem Lamello P). Set mata bor untuk Protec, poros ø 10 mm dengan permukaan penjepit (JSO) 1, mata bor ujung kerucut HW 5x70mm (NL 35mm), LI # 30566-5-05035-L3, mata bor dowel HW 5x70mm (NL 35mm), RE #30540-5-05035-R4, mata bor dowel HW 5x70mm (NL 35mm), LI #30540-5-05035-L3, mata bor dowel HW 8x70mm (NL 35mm), RE #30540-5-08035-R5, mata bor dowel HW 8x70mm (NL 35mm), LI #30540-5-08035-L2, mata bor dowel HW 10x70mm (NL 35mm), LI #30540-5-10035-L1, mata bor corong HW 15x70mm (NL 35mm), LI #30300-5-15070-L1, mata bor corong HW 20x70mm (NL 35mm), RE #30300-5-20070-R1, mata bor corong HW 35x70mm (NL 35mm), RE #30300-5-35070-R, pahat alur HW ø 125/30 mm, lebar pahat alur (SB) 4,0 mm, Z=12, LI, Leitz. Hanya untuk papan serpihan dan MDF, kayu solid berdasarkan permintaan dan setelah kesepakatan. Dudukan alat HSK63 F, 3,00 buah. Untuk collet 462E/OZ25, collet 462E/OZ25 untuk poros 25 mm, 3,00 buah. Pahat poros karbida yang dapat dibalik Z1+1, 1,00 buah, dengan sisipan bor WP, ø20, S25, LI 120, L2/ Nedpfx Aew Tfzfsivolg

Tahun pembuatan: 1999, Kondisi: bekas, Computer-controlled hot foil stamping machine Schmedt Präzimark PMK 203 with a large selection of type wheels, such as: 563 / 610 697 - 2DP. / 635 564 / 667 610 / 16.P. / 634 631 / 169 / 4.3 562 / 697 632 / 697 561 / 695 691-24P / 633 564 / 667 Nodpowvtqnofx Aivslg 610-16P / 634 631 / 691 / 4.3 Technical data: Machine (L x W x H): 850 x 630 x 765 mm Control cabinet (L x W x H): 135 x 370 x 665 mm Space requirements (L x W x H, machine only): 1200 x 890 x 1100 mm Weight, incl. control cabinet: 80 kg Power supply: AC, 1 phase Frequency: 50 Hz Voltage: 230 V Rated current: 2.0 A Power output: 0.6 kW Supply line fuse: 10 A Core cross-section of supply line: 1.5 mm² Connection cable length: 2 m Pneumatic pressure: min. 0.6 MPa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, diameter mata gergaji: 600 mm, ketinggian potong (maks.): 200 mm, lebar pemotongan (maks.): 800 mm, tegangan masuk: 400 V, Technical specifications: Nsdjw Aqndspfx Aivelg - Maximum saw blade diameter: 600 mm - Saw blade arbor: 35 mm - Cutting time per stroke: 4 sec. - Motor power: 7.5 kW - Saw spindle speed: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Required air flow: 1000 m³/h - Voltage: 400 V / 50 Hz, three-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Pneumatic drive for saw blade feed - Two-hand safety PLC control - Automatic motor brake - Set of operating wrenches - Emergency stop button - Speed regulator for saw blade feed - Fixed vertical guard - Upper safety pressure device (pneumatic safety hood) - Extraction speed of at least 28 m/sec.

Kondisi: sangat baik (bekas), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate, cooling: 5.0 K/min Temperature change rate, heating: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test chamber volume: 335 liters Nominal voltage: 3/N/PE AC, 400V ±10 %, 50Hz Nominal power: 10 kW Nominal current: 21 A Noise level at 1m distance (free-field measurement): < 69 dB(A) Side port: 5.5 cm / 12.5 cm The chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your safety as the buyer, please note the following information! Nljdpfx Aiozd R Tgsvog The following points are carried out in advance on the chambers we offer: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored using calibrated equipment. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and errors excepted!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Vötsch VC 4034 Chamber Uji Iklim / Chamber Uji Suhu Deskripsi: Dijual chamber uji iklim dan suhu bekas dari produsen Vötsch Industrietechnik. Unit ini cocok untuk pengujian suhu dan iklim yang menuntut di bidang riset, pengembangan, penjaminan kualitas, industri elektronik, teknologi otomotif, serta pengujian material dan penuaan. Chamber ini telah di-upgrade ke refrigeran modern R452A dan dilengkapi dengan kontrol panel sentuh yang nyaman. Dengan volume ruang uji sekitar 335 liter, sistem ini cocok untuk pengujian individu maupun pengujian dengan struktur percobaan yang luas. Data Teknis: Produsen: Vötsch Industrietechnik GmbH Tipe: VC 4034 Volume ruang uji: sekitar 335 liter Dimensi ruang uji: sekitar 580 x 765 x 750 mm (L x P x T) Dimensi luar: sekitar 780 x 1758 x 1800 mm (L x P x T) Berat: sekitar 515 kg Rentang suhu: -40 °C hingga +180 °C Penyimpangan suhu temporal: ±0,1 hingga ±0,5 K Homogenitas suhu spasial: ±0,5 hingga ±1,5 K Kecepatan pemanasan: sekitar 3,2 K/menit Kecepatan pendinginan: sekitar 3,5 K/menit Operasi Klima: Rentang suhu: -40 °C hingga +180 °C Rentang kelembaban: 10 % hingga 98 % RH Penyimpangan suhu temporal: ±0,1 hingga ±0,3 K Homogenitas suhu spasial: ±0,5 hingga ±1,0 K Refrigeran: R452A Kuantitas isian: 2,5 kg GWP: 2141 Setara CO₂ : 5,35 t Tekanan rendah maksimum: 22 bar(g) Tekanan tinggi maksimum: 25 bar(g) Koneksi listrik: 3/N/PE AC 400 V ±10 % / 50 Hz Daya terpasang: 4,1 kW Arus nominal: 12,5 A Fitur: - Panel kontrol sentuh - Siklus pengujian yang dapat diprogram - Ruang dalam dari stainless steel - Jendela pandang pada pintu - Pencahayaan ruang uji - Sistem sirkulasi udara - Akses samping untuk kabel pengukuran - Beberapa rak stainless steel - Sistem pendinginan berpendingin udara - Dokumentasi tersedia Area Aplikasi: - Pengujian suhu - Pengujian iklim - Pengujian material - Pengujian elektronik - Tes penuaan - Simulasi lingkungan - Penjaminan kualitas - Riset dan pengembangan - Pengujian otomotif Nljdpfxjzd Dm He Aivjg Kondisi: Bekas pakai Kondisi visual sesuai gambar Stiker servis dan kalibrasi tersedia Sistem pendingin telah di-upgrade ke R452A Ruang lingkup pengiriman: - 1x Vötsch VC 4034 Chamber Uji Iklim - Rak stainless steel - Unit kontrol panel sentuh - Dokumentasi / dokumen - Aksesori sesuai gambar Perubahan dan kekeliruan pada data teknis dapat terjadi. Penjualan di tempat lain tetap dimungkinkan.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 60 kW (81,58 hp), jumlah sumbu: 2, berat keseluruhan: 68 kg, panjang meja: 500 mm, lebar meja: 300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, Laser engraving machine for home and hobby use. This desktop unit is also capable of cutting wood, paper, cardboard, acrylic, and fabric. The Wattsan CO2 laser engraver is primarily designed for carving small workpieces. Compact, reliable, and precise—exactly what you need. The Wattsan 0503 micro-engraver processes plywood, wood, plastics, rubber, leather, textiles, and more. It can cut materials up to 5–6 mm thick. It is frequently used for manufacturing souvenirs, stamps, and other decorative items. For further information, feel free to contact our advisors! Nledeh D Rvpjpfx Aivjg Wattsan 0503 Specifications Working area: 500 x 300 mm Laser power: 60 W Table lowering depth: 200 mm Positioning accuracy: 0.03 mm Machine dimensions: 650 x 1040 x 575 mm Packing dimensions: 765 x 1140 x 710 mm Weight: 104 kg Virmer not only supplies high-quality machines but also offers service and delivery. Our engineers and consultants are ready to answer all your questions and, if necessary, provide video support. Additionally, Wattsan device owners benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. As the official supplier for Wattsan, we deliver not only laser engravers but also metal cutters, welding machines, marking machines, and cleaning units. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years and continuously develops its machines with the help of customer feedback. Owing to this feedback, Wattsan has carried out over 50 upgrades, making the machines more reliable, precise, and powerful, enabling you to bring your business to the next level. YOU CAN CONTACT US BY EMAIL OR PHONE! WE WILL SELECT THE RIGHT MACHINE FOR YOUR REQUIREMENTS. If you are looking for the right laser or CNC milling machine, we are happy to assist. You will find a wide selection of laser machines and equipment with us: CO2 laser machines; metal laser cutting machines; fiber metal laser cutters; fiber laser engravers; CNC milling machines for metal; wood milling machines; CNC routers; laser engraving machines; laser engravers; plywood laser cutters; metal laser cutters; CNC routers; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus sources; compressors; rotary attachments; mirrors for laser machines.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 90 kW (122,37 hp), jumlah sumbu: 2, berat keseluruhan: 110 kg, panjang meja: 600 mm, lebar meja: 400 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, Laser engraving machine for home use and hobby applications. This desktop unit can also cut wood, paper, cardboard, acrylic, and fabric. The Wattsan CO2 laser engraver is primarily intended for cutting small workpieces. Compact, reliable, and precise—exactly what you need. The Wattsan 6040 engraving machine processes plywood, wood, plastics, rubber, leather, fabric, and much more. It can cut materials up to 7-8 mm thick. It is frequently used for producing souvenirs, stamps, small decorations, and similar items. For further information, you can call our managers! Wattsan 6040 Features: - Working area: 600 x 400 mm - Laser power: 90-100 W - Lowering depth of worktable: 200 mm - Positioning accuracy: 0.03 mm - Machine dimensions: 765 x 1165 x 600 mm - Packaging dimensions: 860 x 1250 x 790 mm - Weight: 121 kg Virmer not only offers top-quality machines but also provides service and delivery. Our engineers and managers are ready to answer all your questions and can provide video support if required. Additionally, owners of Wattsan machines receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We supply not only laser engraving machines, but also metal cutters, welding machines, markers, and cleaning systems. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and is continuously evolving with the help of its customers. Thanks to customer feedback, Wattsan has implemented over 50 upgrades, making the machines more reliable, precise, and powerful—allowing you to take your business to the next level. Nodpfx Ash Uc Eroivolg YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for the right laser or CNC milling machine, we are happy to assist. You will find a wide selection of laser machines and equipment at our company: CO2 laser engraving machine; metal laser cutting machine; laser metal cutter; fiber metal laser; fiber metal laser engraving machine; CNC milling machine for metal; woodworking milling machine; CNC milling machine; laser engraving machine; laser engraver; plywood laser cutting machine; laser engraver; metal laser cutting machine; CNC milling machine; laser marker; lenses; chiller; machine cooling system; S&A chiller; IPG laser, MAX Photonics, Raycus; compressor; rotary device; mirrors for laser machines.

Tahun pembuatan: 1973, Kondisi: bekas, Drilling capacity in steel (diameter): 32 mm Throat depth: 410 - 1000 mm Nodpfx Aiegmu A Ssvjlg Workpiece height - max.: 765 mm Coolant system: yes Drill spindle diameter: 38 mm Quill diameter: 70 mm Spindle stroke: 225 mm Drill spindle taper: MK 4 Spindle speeds - stepless: 70 - 2000 rpm Feed range - spindle: 0.04 - 0.32 mm/rev Column diameter: 225 mm Drill radius max./min.: max. 1130 mm Table clamping surface: 630 x 1320 mm Height adjustment: 500 mm Base plate: 1500 x 1000 mm T-slots: 4 pieces T-slot spacing: 18 mm Total power requirement: 2.2 kW Machine weight approx.: 1.8 t Space requirement approx.: – Support travel: 590 mm Without rotary table, without tools

Kondisi: sangat baik (bekas), DOOSAN VC 630/5AX TAHUN 2015 CNC HEIDENHAIN 530 TRAVEL AXES: -X: 650 mm -Y: 765 mm -Z: 520 mm -A: 150 (+30 -120º) –(0,001º) Nledpozc Hm Ujfx Aivjg -C: 360º (0,001º) TABLE: -5 Continuous axes -⌀ 630 mm -Spindle to table distance: 210-730 mm -Max. admissible weight: 500 kg RAPID TRAVERSE: - X: 40 m/min - Y: 40 m/min - Z: 36 m/min - A: 20º/min - C: 30º/min BALL SCREWS: ⌀ 45 X 16(X, Y), ⌀ 45 X 12 (Z) mm SPINDLE HEAD ISO 40 DIN69871 (*Brand new) -Motor Power (cont-30 min): 24/32 kW -Rpm: 20,000 INCLUDED OPTIONS: -Optical scales on all axes -120-position tool changer -Automatic 5-pallet changer -Renishaw measuring probe -Laser presetting device -Chip conveyor CONDITION: Machine in excellent condition. Completely new spindle head. Can be seen in operation.

Kondisi: bekas, Tahun pembuatan: 1996, nomor mesin/kendaraan: 7/4986, Total gaya tekan: 250 - 400 t Gaya hidrolik ring zacken (meja bawah): 20 - 200 t Gaya hidrolik lawan (meja atas): 10 - 100 t Langkah slider: 30 - 200 mm Langkah ring zacken: 40 mm Langkah penahan lawan: 40 mm Tinggi pemasangan: 760 mm Dimensi pelat penjepit atas: 800 x 800 mm Dimensi pelat penjepit bawah: 810 x 1000 mm Nsdpfx Aisuqdxisvolg Ukuran alat maksimum: 765 x 760 x 610 mm Jumlah langkah: 40 min-1 Gerak cepat turun: 120 mm / d Gerak cepat naik: 135 mm / d Kecepatan kerja: 5 - 50 mm / d Total berat alat: 2400 kg Perlengkapan standar Otomatisasi Bak pengenduran dengan mesin pelurus

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 2 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 34, Kolbus Casemaker, compleet met palletinvoer type PPA290 Omslag – formaatbereik open omslag (breedte x hoogte): min. 300 x 210 mm, max. 1050 x 735 mm Bekledingsmateriaal (breedte x hoogte): min. 765 x 200 mm, max. 1080 x 290 mm Grijsborddikte: min. 1 mm, max. 4 mm Mechanische snelheid: tot 40 cycli/min Nsdpfxewnqtkj Aivjlg Invoerbord, stijve ruginvoer, flexibele ruginvoer vanaf rol, invoer bekledingsmateriaal, lijmtank, lijmrollen, persinrichting, uitvoertransportband Machinenummer: 34, Geproduceerde boeken: 2 miljoen

Kondisi: bekas, jarak tempuh: 85.000 km, daya: 390 kW (530,25 hp), pendaftaran pertama: 06/2025, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, bahan bakar: diesel, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, suspensi: udara, Perlengkapan: ABS, filter jelaga, kemudi berkuasa, kendali jelajah, kontrol traksi, kopling trailer, kunci sentral, pemanas jok, pemanas parkir, pendingin udara, unit pendingin,

Kondisi: hampir baru (bekas), Pendingin air dengan kompresor pendingin Tipe: eChilly 5-5 Merek: HYFRA (DALEX) Kapasitas pendinginan pada suhu air 20°C: 5,5 kW Nsdpfx Aiozg Tqtsvslg Dimensi (P/L/T) dalam mm: 770 x 765 x 515 Berat: 90 kg

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, 5-axis simultaneous machining center MAZAK Variaxis 630-5X II T with rotary function and top-level equipment. Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. work height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - ICS (internal coolant supply) - Showa oil mist extractor - Renishaw probe The following features/options are available: - Linear scale system for X and Y axes - Tool magazine for 80 tools - Air blast device at the workpiece - Oil mist extraction CRK 1500K - Coolant temperature control - Flood coolant system 4.5 bar - Workpiece flushing unit - High-pressure through-spindle coolant 70 bar - Pressure switch for through-spindle coolant - Chip conveyor, discharge right (Consep) - MAZAK Monitoring System B including Renishaw probe MP10 - Prepared for visual tool recognition system - Detachable electronic handwheel - Milling spindle for synchronous tapping - Tool tip control for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program storage 8 MB - Rapid traverse – constant inclination angle during movement - MAZACC-3D high-speed software package - Form compensation for rotating axes - Ethernet operation function - High precision control for finishing - Cylinder interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck 21" - Additional work area lighting Nledpfxox Db D Ae Aivjg The machine is in very good condition and can be inspected under power at its current location.

Tahun pembuatan: 2021, Kondisi: baru, Unladen weight: 765 kg Njdpen Tm S Uofx Aivjlg Trenching bucket K160 L1400 OQ65 reversible blade This bucket is ready for dispatch. For transport arrangements, please contact us with the delivery address. We can offer cost-effective shipping solutions. We manufacture trenching buckets with OilQuick or Lehnhoff mounting systems. For detailed information, please contact us.