Beli Tukang Kayu bekas (13.094)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Hundegger Speed Cut SC1 CNC Tahun 2005, dalam kondisi teknis yang baik, mencari pemilik baru. Pgsdpfx Aexftalsb Isw Sangat baik untuk produksi atap plat logam yang dipaku. Video menunjukkan mesin saat beroperasi.

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, de Pgjdpfx Abexyf Evj Iow

Kondisi: bekas, SINGLE-END TENONER PARVEAU WITH NUMERICAL POSITIONING TYPE 920 WITH 4HP SAW MOTOR 10HP SPINDLE MOULDER 300MM SHAFT 10HP SPINDLE MOULDER 300MM SHAFT Pjdpfxsv Txrgs Ab Ijgw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 4.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Pelat tipe tersedia, Kontrol x-motion plus: • dengan monitor smartouch 15" yang dapat diputar • ruang penyimpanan tak terbatas untuk program kerja yang ditetapkan operator • pengaturan parameter jarak yang presisi • simbol agregat dan fungsi yang sederhana serta mudah dipahami • pengaturan suhu lem, pengurangan suhu lem secara otomatis saat mode idle • pemilihan agregat, pengaturan agregat yang dikendalikan secara posisi dan bermotor secara presisi (akurasi pengaturan 1/100 mm) melalui panel kontrol Pgsdpfoxx Aiiex Ab Iow • optimalisasi sisa pelapis tepi di depan dan belakang panel saat pemotongan awal • pesan kesalahan yang jelas FORMAT 4 adalah merek dari FELDER KG

Kondisi: sangat baik (bekas), Very good condition. Pedpfxsw Ebwue Ab Isgw

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, BL100A log home milling machine, completely overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, processing length up to 9.0m Pjdoxxhwljpfx Ab Isgw • Infeed table (toothed belt cross conveyor) and entry table for timber length 9m • BL100A log home milling machine – 4-head milling unit with hydropneumatic feed, 2x4kW / 2x3kW for cross section approx. 140x220mm • Carbide reversible insert tools for wall thickness approx. 40–100mm included • End groove milling unit 3.0kW, with cutter B=21-40mm • Boring device with drill guide and bit D=20mm • Integrated under-table cross-cut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with push-off device and material storage table 6x1.5m • Servo pusher positioning system with IPC control and IITO control software • Label printer for part marking, laser printer for printing production lists • Excellent condition, factory overhauled & fully serviced, with parts warranty, ready for operation • Price & delivery time upon request. Subject to prior sale and all rights reserved

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12762, ketinggian potong (maks.): 300 mm, Fully automatic wood infeed Infeed roller conveyor Loading and feeding cross conveyor Under-table swiveling crosscut saw, 11 kW 5-axis universal milling unit - UF5 Combination support for vertically operating tools Drilling unit 2.2 kW - vertical drilling direction Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) - horizontal drilling direction Slotting unit 7.5 kW Marking device at the rear (on the stop side) Fully automatic hydraulic beam turning station Pgsdpfxjxxa Dwe Ab Iow Transport and positioning system "two-hand operation" Electronic control with Hundegger production software Roller conveyor for wood outfeed with pusher 5-arm timber rack Safety devices and protective guarding Refined machine surface Extension for loading cross conveyor Infeed roller conveyor for 13 m wood length 5-axis universal milling unit - UF5 Turret milling unit - vertical from above Remote maintenance possible Special switch cabinet installation Control unit for waste disposal with operating buttons Extension roller conveyor 7.10 m, non-driven Liftable and lowerable safety impact barrier

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 140 mm, lebar pemotongan (maks.): 350 mm, diameter mata gergaji: 350 mm, berat keseluruhan: 3.200 kg, The machine is in very good technical condition and ready for operation. It runs very quietly. TECHNICAL PARAMETERS: - Track width: 350 mm - Roller width: 640 mm - Max. blade diameter: 350 mm - Blade bore diameter: 70 mm - Max. cutting height: 140 mm Top section: - Pawls - Smooth metal feed roller - Pawls - Smooth metal feed roller - Shaft with saw blades + insert for short pieces - 2 smooth metal feed rollers Bottom section: - Guide rail - Pawls Podpfeuzm Atsx Ab Iegw - Track - Central lubrication system - Extraction port diameter: 200 mm - Infinitely variable feed speed adjustment - Feed motor: 1.1 kW - Main motor: 35 kW Machine dimensions: - Length: 2000 mm - Width: 1550 mm - Height: 1550 mm - Weight: 3200 kg You are welcome to test the machine on site. Where can you see our machines? JBS WOODWORKING MACHINERY Wolica Druga 26 23-310 Modliborzyce, Poland On-site machine testing available. Financing options available via leasing or in installments. WE ARRANGE MACHINE TRANSPORT!

Kondisi: sangat baik (bekas), NOMOR KATALOG: 6907 Pgedpfskvn T Nox Ab Iew DATA TEKNIS - Bukaan atas hopper pengisian: 1980x1050mm - Bukaan bawah hopper pengisian: 980x1050mm - Keluaran serpihan kayu: diameter 210mm - Lebar kerja rotor: 980mm - Motor utama: 30kW - Motor pompa: 1,1kW - Jumlah pisau: 36 buah - Ukuran pisau: 40x40mm - Saringan: 18mm - Laci penekan - Autorevers listrik - Dimensi (p/l/t): 2100x2030x2070mm - Berat sekitar 3500kg – Produksi Prancis – Setara dengan WEIMA WL 10 – Pisau baru terpasang – Autorevers – Laci penekan – Kondisi sangat baik – Mesin pencacah bekas Harga netto: 88.900 PLN Harga netto: 2.160 EUR Harga netto dihitung berdasarkan kurs 4,2 PLN/EUR (Jika terjadi fluktuasi kurs yang signifikan, harga dapat berubah)

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11174, We are selling our used Hundegger fully automatic joinery machine, model K2, year of manufacture 2001. - Infeed and loading cross conveyor (6-strand) - Under-table pivoting crosscut saw - Universal milling unit (UF4) - Combination carriage for vertically operating tools - 2.2 kW drilling unit – vertical - 3 kW drilling unit – vertical - Vertical finger jointing mill 7.5 kW - Combination carriage for horizontally operating tools - 2.2 kW drilling unit - 2.2 kW drilling unit – horizontally pivotable - Grooving unit - Rear marking unit - Bottom marking and lettering unit - Fully automatic beam turning station Pgjdpfx Abexvycho Ijw - Dovetail cutter - “Two-hand system” transport and positioning device - Electronic control system - Extension roller conveyor 5.30 m - 6-arm stacking table - Height-adjustable safety guard - Extension of the AWF + timber infeed for 13 m - Tooling included - ...For further details, please refer to the photos and contact us for more information. The machine is in full working order and can be inspected by appointment. Available from spring 2026. All documents are available; regular servicing by Hundegger; no refurbishment. Dismantling and collection at buyer’s expense. Sale as a used machine excludes any warranty or guarantee.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Krüsimatic G2 Joinery Centre – Used, Fully Refurbished Condition & Refurbishment The machine has been completely overhauled by Krüsi Maschinenbau AG. It is supplied with a new control unit, controllers, servo motors, and wiring – including a 12-month warranty on the mechanics and new components. Technical Specifications • Maximum timber cross-section: 200 x 320 mm • Infeed length: 10,000 mm • Outfeed length: 10,000 mm • Supply voltage: 3 x 400 V / 50 Hz • Fusing: 3 x 63 A (provided by customer) • Pneumatic pressure: ≥ 8 bar • Air consumption: 10 – 15 m³/h • Machine control: IST Software / Abb3d Pjdjwb Ev Hepfx Ab Iegw • Interface: BTL-compatible Machining Units Portal 1: • 5-axis saw unit (angle-limited) • 4-axis milling unit with 5-position spindle head (horizontal) + marker • 4-axis notching unit with 2-position spindle head (vertical) • Drilling unit with two horizontal tool holders • Chain mortising unit Portal 2: • Two chalet milling motors (vertical) • Two chalet milling motors (horizontal) • Two drilling units (horizontal) • Grooving unit (horizontal & vertical) Accessory Equipment • Comprehensive tool kit included • Two compressed air tanks for weight compensation of the portals An excellent opportunity for carpentry shops, timber construction companies, and joinery centres seeking reliability and precision – supplied with factory warranty.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 3.200 h, Dijual Weinmann WBZ 160/13 Powersix mesin pemrosesan kayu tahun 2015 dalam kondisi sangat baik. Mesin ini hanya digunakan untuk kebutuhan internal perusahaan kami. Peninjauan dapat dilakukan sesuai perjanjian. Pgjdpfxsxclhce Ab Iow

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: fungsi terbatas, Perlengkapan Mesin Pemrosesan Kayu - K2 Konveyor lintas tugas 5-lajur 2,2 m Rak kayu dapat ditarik keluar Gergaji potong bawah meja dengan dasar terbuka Kontrol untuk pembuangan potongan Unit frais universal Psdpfx Asxrkkzjb Ijgw Frais rol Frais jari Frais sambungan ekor burung dara Dudukan kombinasi untuk alat kerja vertikal Mesin bor Dudukan kombinasi untuk alat kerja horizontal Mesin bor-1 Mesin bor-2 Mesin pembuat celah Alat penanda sisi benturan Stasiun pembalik balok sepenuhnya otomatis Meja ekstensi 7,1 m Konveyor lintas penyerahan 6-lajur Meja penampung 6 lengan Mesin serut-HMC Penyerutan dan chamfering 4 sisi sepenuhnya otomatis Motor serut 7 kW Mesin dapat dilihat kapan saja berdasarkan permintaan. Pembeli harus mengatur pembongkaran dan pengangkutan sendiri.

Kondisi: baik (bekas), Tahun pembuatan: 1996, EN-KRUSI-Chalet-Construction-Machine-Blockhouse-Production-Line- Type-CM-40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / operational Operating principle: Processing of structural timber for chalet construction / log house manufacturing Beams can be machined in a single pass • Cross-cutting • Horizontal and vertical milling of tenons / grooves in one clamping • Drilling • Milling of face grooves Workpiece: • Maximum cutting height: 200 mm • Maximum cutting width: 250 mm Robust welded steel construction. Machine (horizontal and vertical milling units) with 4 special milling motors, with hardened and ground linear guides for highest machining precision. Carriage runs on dust-protected and preloaded ball bearing guide rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control system. Motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for external chip extraction, with 2 eccentric clamps, without milling tool (rebate cutter). With electro-controlled hydropneumatic horizontal and vertical feed, feed is synchronized with the start of the milling motors. Rapid traverse and feed rate continuously adjustable. Completely wired and installed, including air maintenance unit. Timber thicker than 14 cm must be machined in two passes. Such pieces must be repositioned to compensate for the excess thickness for second milling. Machine safety covers over moving parts with gas spring counterbalancing. Machine description / equipped with: 1. Sawing unit: Manual feed Spindle adjustment with analog gauge Max. saw blade diameter / bore: 400 / 30 mm Carbide-tipped with chip depth limiter (downcut) Adjustable riving knife Motor speed: min-1 / 2900 Power: 2.2 kW 2. CM milling unit (log house unit) Hydropneumatic feed Spindle adjustment with digital display Horizontal milling unit: Cutter diameter: 180 mm Max. cutter width: 130 mm (For cutter width from 60 mm, only use cutters made of aluminum alloy with indexable inserts) 2 motors, hydropneumatic feed, each 2.2 kW Hydropneumatic feed Rapid traverse and feed rate infinitely variable 3. Drilling unit: Manual feed Spindle adjustment with analog indication Collet chuck: ER 25 Clamping diameter max: 16 mm Drill diameter max: 32 mm Motor: min-1 1450, 1.8 kW 4. Face-milling unit Hydropneumatic feed Spindle adjustment with digital display Pgedpeu Uh T Djfx Ab Iew Max. cutter diameter: 230 mm Max. cutter width: 60 mm Motor: min-1 / 2900, 3.0 kW 2 v-belts SPZ 9.5x1000 La Pneumatics: Customer-side operating pressure min/max: MPa (bar): 0.7/1 (7/10) Compressed air consumption: 8 Nm3/h Electrics: Operating voltage: V / Hz 380, 50 Rated power: 8.8-15.8 kW depending on configuration Customer-side fuse: 3 x 25 A (slow blow) Max. simultaneous power consumption: 4.4 kW Dimensions: Machine width: 2400 mm Machine depth: 1600 mm Total height, guard down: 1600 mm Total height, guard up: 2200 mm Extraction port diameter (bottom extraction): Approx. weight: 1300 kg Incl. 2 x 6 m (2 x 4 m) roller conveyors Technical specifications subject to change!

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 22.000 kg, daya angkat: 2.500 kg/m, tinggi angkat: 19.000 mm, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 04/2026, Tahun pembuatan: 2020, panjang total: 13.000 mm, lebar total: 2.500 mm, tinggi total: 3.600 mm, nomor mesin/kendaraan: 445, Perlengkapan: ABS, garpu palet, lampu depan tambahan, Kami menawarkan tower crane FB Gru 727 D80 kami untuk dijual, tipe crane rakitan cepat yang ideal untuk tukang atap dan tukang kayu. Crane selalu dirawat dengan baik dan dalam kondisi sangat baik. Pada jarak 27 m masih dapat mengangkat 700 kg. Di lengan jib terpasang tetap 3 lampu sorot LED besar yang menerangi seluruh area konstruksi di malam hari! Crane saat ini sedang digunakan dan dapat dilihat serta diuji kapan saja. Pgodpfx Aboxiydxj Ijw Fork pallet terpasang tetap pada tiang utama dan bisa digunakan kapan saja.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12431, lebar kerja: 625 mm, Perlengkapan: penghadang cahaya keselamatan, For sale is a fully automatic Hundegger K2i 625 joinery machine in very good, regularly serviced condition. The machine is currently still in operation and can be inspected on site by appointment. Availability: from mid-November 2025 Pedpfx Abexcw Sto Isgw Equipment & Technical details: - Lifting table with 3 t payload - Transfer waiting table with wide chains - Fully automatic timber infeed (infeed roller conveyor, loading and cross conveyors) - Under-table swivelling crosscut saw (11 kW) - Universal milling unit (5-axis) - Combination support for vertically operating tools - Vertical finger milling unit (5.5 kW) - Drilling units, vertical & horizontal (2.2 kW / 3.0 kW reinforced) - Marking units: front, rear, underside - Hydraulic beam turning station - Two-hand transport & positioning device incl. machine frame - Control with EKP software - Roller conveyor with ejector - Safety equipment & guarding - Height-adjustable cross rollers in the infeed area - Frame extension to 13.56 m - Loading conveyor & roller track for timber lengths up to 13 m - Raw timber holder in front of universal saw - Revolver milling unit (vertical) - Longitudinal & transverse groove milling unit - Slotting device (12.5 kW) - Top-mounted feed roller - Extended roller conveyor with height-adjustable rollers Sales Listing - Hundegger K2i Maintenance condition: - Main and secondary guides renewed (March 2022) - Energy chains with cables renewed (August 2022) - Universal milling unit replaced several times - Normal age-related wear - All work carried out by Hundegger according to maintenance schedule Optionally available: As-new AL-KO Power Unit 300 P-ZRS clean air extractor with rotary airlock, incl. Hundegger waste chute and working platform Surcharge: EUR 54,000 plus VAT Further information: Location & viewing by appointment The stated price is exclusive of VAT

Kondisi: hampir baru (bekas), Paket enam rasp untuk mesin pengamplas profil tukang kayu PS 0 dengan profil rasp Rasp terlihat hampir seperti baru, lihat foto. Dijual hanya sebagai paket, tidak dijual terpisah. Mesin dapat didemonstrasikan di lokasi kami dengan janji temu. Kami hanya menawarkan mesin yang siap ditunjukkan di gudang kami, lihat "penawaran lainnya dari penjual ini". Pjdpfsw Ni Egox Ab Isgw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Mesin-mesin dalam lini 1. VANHOLD M 300 gergaji multi-blade tipe roda rantai 2. Sabuk keluar di belakang gergaji multi-blade 3. Sabuk transfer ke mesin pengumpan otomatis dengan pengetuk 4. VANHOLD Speed Master pengumpan otomatis 5. VANHOLD Powermax 2300_5 mesin penghalus empat sisi Spesifikasi teknis detail dari lini – tersedia atas permintaan melalui email. Harga lini baru adalah 100.000 euro. Pedpfx Aew Nhfleb Iegw

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, panjang total: 9.100 mm, lebar total: 3.600 mm, Perusahaan kami memproduksi mesin dan peralatan untuk pabrik prefabrikasi rumah. Kami memproduksi meja perakitan tetap, meja rotasi, meja tipe kupu-kupu, serta lini produksi lengkap. Penawaran baru: meja perakitan berukuran 3,6 m x 9,0 m - Konstruksi dilapisi cat powder coating - Permukaan meja dilapisi multipleks berlapis tahan benturan - Lubang untuk pemasangan aktuator penekan SD-01 Pgedjvv Rv Aspfx Ab Iow - Pin pembatas dapat dilepas dan diatur - Konstruksi modular untuk perakitan sendiri (satu palet) - Biaya transportasi rendah ke seluruh Eropa

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Saw blade diameter: 750 mm, saw blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height at 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An on-site inspection is possible. Pgedpfx Abjurwy Ae Ijw

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, lebar pemotongan (maks.): 625 mm, Hundegger joinery machine with mechanization 5 axes Working width: 625 mm Psdpfov Ubtcex Ab Iegw with tools

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, For sale: 4 Weinmann butterfly tables with dimensions 10.5m in length and 3.2m in width. Pjdpow D Upuofx Ab Iogw WMS150 multifunctional bridge with 3 tool holders, saw, and milling unit.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.500 kg, SCM M2 Track Multi-Blade Saw 18 kW Podpfst Rivyjx Ab Ijgw Specification: • Condition – used • Manufacturer – SCM • Model – M2 • Track width: 220 mm • Max. working height: 120 mm • Main motor power: 25 HP (18 kW) • Blade diameter: 340 mm • Spindle diameter: 40 mm, sleeves 70 mm • Track speed adjustment: 6–48 m/min • Track in very good condition, not worn • Working table dimensions: 164 x 90 cm • Extraction port diameter: 180 mm • Weight: approx. 1500 kg • Overall dimensions: 220 x 160 x 140 cm (W x L x H) Additional information: • The machine is in good technical condition, ready for immediate use • The attached pictures show the actual condition of the item for sale • Possibility to connect and test the machine on site • The price stated in the listing is net, VAT and transport costs not included Additional photos and video available at the following link: drive.google.com/drive/folders/1u41GyV7Exyaj8dfI1m5fPvTzSnMzhRqd ?usp=sharing

Kondisi: baru, Carpenter's nails packed in 5 kg packages. 6.5 x 180 galvanized 400 kg 80 packages 6.5 x 215 galvanized 1300 kg 260 packages 6.5 x 215 plain 450 kg 90 packages 7.5 x 245 galvanized 550 kg 110 packages 7.5 x 245 plain 300 kg 60 packages Podpfx Aoh Ar Atsb Ijgw 8.5 x 275 galvanized 1000 kg 200 packages 8.5 x 275 plain 100 kg 20 packages 8.5 x 300 plain 100 kg 20 packages Shear connectors 155/135/155/100 plain 100 kg A special price can be offered when purchasing all nails or shear connectors. However, individual packages can also be bought.

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, EN: KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Year of manufacture: 1996 Krüsi CM40, comprising the following components: - Circular saw (cross-cut saw) - Log house milling unit horizontal and vertical - Groove milling units (horizontal) - Boring unit - Infeed table 6m - Outfeed table 6m KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund, AR Year of manufacture: 1996 CE-marked Condition: Good, technically inspected and cleaned / ready for operation Operating Principle: Processing of timber for chalet / log house construction Beams can be machined in a single operation: - Cross-cutting - Horizontal and vertical milling of tenons / grooves in a single clamping - Drilling - Milling front grooves Workpiece: - Max. cutting height: 200 mm - Max. cutting width: 250 mm Robust welded construction. Machine (horizontal and vertical milling units) with 4 special milling motors, Hardened and ground guides for highest machining accuracy. Carriage guidance by dust-protected, preloaded, ball-bearing rollers. Working area up to 200 x 250 mm. Fully operational with contactor control, Motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, Central connection for customer-provided chip extraction system, with 2 excenter clamps, Without milling tools (profile cutters). Hydropneumatic horizontal and vertical feed, electrically controlled, together with spindle motor activation. Rapid traverse and feed continuously adjustable. Completely wired and installed, including air maintenance unit. Timbers thicker than 14 cm must be machined in two clampings. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog measurement display Saw blade Ø max. / bore ø 400 / 30 mm Tungsten carbide-tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2.2 2. CM Milling Unit (Log House Unit): Hydropneumatic feed Spindle adjustment with digital readout Horizontal milling unit Cutter Ø 180 mm Maximum cutter width 130 mm For cutter widths over 60 mm use only alloy cutters with indexable inserts 2 hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed Rapid traverse and working feed continuously adjustable 3. Drilling unit: Pgodsvfv Tfopfx Ab Isw Manual feed Spindle adjustment with analog display Drill holder collet chuck ER 25 Max. clamping Ø 16 mm Max. drill Ø 32 mm Motor min-1 1450, kW 1.8 4. Planing/milling unit: Hydropneumatic feed Spindle adjustment with digital display Max. cutter Ø 230 mm Max. cutter width 60 mm Motor min-1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatics: Required operating pressure min/max MPa (bar): 0.7/1 (7/10) Air consumption Nm3/h: 8 Electrical equipment: Operating voltage V / Hz: 380, 50 Rated power kW: 8.8–15.8 depending on version Customer-side main fuse: A 3 x 25 tr