Beli Ultimax bekas (75)

Kondisi: bekas, cnc-vertikal-bmc25m-en Fsdpfxsw Nklhe Aagepd

Kondisi: bekas, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction: 1996 CNC Path Control Ultimax 3 Travel paths X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with coolant groove) 1120 x 500 mm Fedpfx Aaotrhq Hogopd Spindle taper SK 40 Distance spindle nose - table 150 - 760 mm Overhang 450 mm Spindle speed 80 to 8000 rpm, stepless Feed rate 3 to 16,000 mm/min Rapid traverse 24 m/min Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - electronic handwheel - Indirect measuring system with rotary encoders mounted on the ballscrew - Tool changer with 24 tool positions - Fully enclosed safety cabin with sliding door - Swiveling control panel - Yaskawa spindle drives (Japan) - Pneumatic mechanical tool clamping system - Coolant system externally mounted, pushed in from the rear - Tank flushing Machine width 2400 mm Space required for transport L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg Good condition

Kondisi: sangat baik (bekas), 7316 Fpedpsymnqvjfx Aaged

Kondisi: bekas, Tahun pembuatan: 2012, zuladung-28200-faymonville-hu-it-lt-2024 Fpodsyt Ikcjpfx Aagjd

Kondisi: baru, berat keseluruhan: 80.000 kg, konfigurasi gandar: 3 gardan, lebar total: 2.540 mm, Perlengkapan: ABS,

Kondisi: baru, Tahun pembuatan: 2026, Cutting width 450 mm Weight 5,500 kg Working height 850 mm WINTER multi-blade saw MULTIMAX 175 M4 + VISUAL OPTIMIZATION SYSTEM VISUAL OPTIMIZATION SYSTEM: The operator places the raw boards onto the chain conveyor. The crossfeed is started by pressing a manual button. While the board is being transported beneath the visual measuring system, it is measured from above. The determined usable board width serves as the basis for 2D optimization. Fpsdpfx Asyk Icgjagjd The line can be operated in two modes: 1. Automatic mode without consideration of quality The detected usable board surface is optimized in accordance with the pre-programmed width/length combinations. 2. Semi-automatic mode with quality offset The usable board surface can be corrected by marking different quality zones across the board width. Quality marking is done via the touchscreen. Optimized boards are handed over to the infeed and positioning system, which fixes the board using two positioning hooks. Conveyor belts and upper pressure rollers guide the board precisely into the MULTIMAX 175 M4. Function: The board measurement takes place during the crossfeed. To ensure proper measurement, the narrow side of the board must face upwards. Automatic measurement provides information on: Total width of the board Position and width of the board edge Effective usable width Board length (within the permitted grid) By entering an offset, parts of the board edge can be permitted for certain products. 2D Optimization Program: Width: Optimization based solely on width according to cut list for maximum material yield. Price: Additionally, prices are stored in the cut list; the system optimizes for maximum value. Quantity: Required quantities are considered, allowing the machine to process orders quickly. Based on the stored lengths and widths, the vision system performs a complete 2D optimization. All input data is saved and analyzed, allowing any cut to be checked at any time. The quality functions module allows the operator to overwrite the measured board width and define quality zones. The updated optimization is displayed on the touchscreen. Up to four quality levels are possible. However, the quality offset function reduces the maximum line throughput. Technical parameters Feed speed 50 m/min Maximum infeed width 800 mm Infeed length 800–4000 mm Feed platform motor power 0.75 kW Working height 870 mm Number of cross chains 6 Chain length 2850 mm Conveyor weight 1.2 t Visual scan system weight 1.8 t Servo power of positioning hooks 2 × 800 W Horizontal feed speed 20 m/min Horizontal feed motor power 0.75 kW Longitudinal feed speed 10–60 m/min Longitudinal feed motor power 1.5 kW Infeed system weight 1.4 t MULTIMAX 175 M4: Function: Optimization software for controlling the movable saw units includes: Industrial PC with touchscreen - Input of saw lists, display of optimization results, machine status, error messages Multifunction handheld device for quality marking and width measurement Laser for width measurement Each handheld unit controls a freely positionable saw arbor Software opti...

Kondisi: baru, Tahun pembuatan: 2026, Cutting width 450 mm Operating voltage 400 V Weight 5500 kg WINTER multi-blade saw with 4 electronically adjustable saws MULTIMAX 175 M4 MULTIMAX 175 M4: Function: Optimization software for controlling the moveable saw units includes: Industrial computer with touchscreen - Input of cutting lists, display of optimization results, machine status, error messages Multifunctional hand device for quality marking and width measurement Laser for width measurement Each manual control unit operates a freely positionable saw spindle Software optimizes considering material yield, value, and productivity. All production data is stored, monitored, and analyzed. Additional features: Independent control panel (cable length 6 m) Mist lubrication system for the saw spindles FIX laser (manually adjustable) for indicating saw blade position Moveable lasers per saw spindle (synchronized with blade position) Lasers can already indicate the next cutting solution while the previous board is still being sawn Infeed system Automatic infeed "Easy Feed" with powered pressure rollers Continuously variable feed speed High-performance transport chain with hardened guide pins Hardened prism rails for precise guidance Technical parameters MULTIMAX 175 M4: Max. cutting width: 450 mm Min. cutting width: 45 mm Max. cutting height without pressure plate: 80 mm Max. cutting height with pressure plate: 60 mm Max. pass-through width: 800 mm Min. cutting length with pressure plate: 600 mm Total motor power: 37 kW Operating voltage: 400 V / 50 Hz Saw spindle diameter: 65 mm Spindle speed: 4200 rpm Saw blade Ø min./max.: 250 / 305 mm Saw blade bore: 80 mm 6 HW saw blades Ø300 × 3.1 / 2.2 × Z28 Positioning speed: max. 150 mm/s Positioning tolerance: ±0.1 mm Feed speed: 6-60 m/min Feed motor: 4.0 kW Chain width: 500 mm Pressure roller diameter: 110 mm Max. total outfeed width: 800 mm Temperature range: 0-40 °C Extraction hood Ø250 mm Air speed: 30 m/s Air volume: 5300 m³/h Working height: 850 mm Machine dimensions: 2732 × 2256 × 2003 mm Fpjdpfxjyk H Uns Aagod Net weight: 5500 kg Colour: light grey RAL7035 / anthracite RAL7016 Cursor adjustment range: 5 m Configuration: Transport chain with spikes (every 2nd chain link) Penetration depth: 0.8 mm (standard) Advantages: Parallel feed, Stable hold for warped/wide/short boards Ideal for gluing joint cuts Chain brush at infeed for continuous cleaning Precision cutting via prism-guided transport chain Automatic chain lubrication (adjustable via MFD/touchscreen) Wear-resistant chain guide under the saw blades Additional equipment: Driven outfeed roller below (ribbed) + upper pressure roller Pneumatic control for safe ejection of offcuts High-performance pressure system with 6 spring-mounted rollers Moving pressure plate synchronised with saw blade movement Secure hold-down along the entire cutting length Motorized height adjustment of the pressure system with display Pneumatic cushioning of all pressure cylinders Separate pressure control for each element Work and operational safety: 1 set of operating and instruction manuals CE safety standards Multiple anti-kickback devices Swivelling protective hood with locking and standstill monitoring Emergency stop at infeed, outfeed, and control panel Protective cover with viewing window...

Kondisi: bekas, Fungsionalitas: belum diuji, Kombisteamer Eloma Model Multimax B 10-11 Fjdpfx Ajvktcbsagopd Fungsi memasak: udara panas dan uap 11 rak untuk GN 1/1 Konstruksi stainless steel Koneksi: 400V, 17,1 kW, colokan 32A-CEE Dimensi kira-kira: 925 x 810 x 850 mm (P x L x T) Unit bekas Layanan pengantaran Banyak mesin lain tersedia di stok!

Kondisi: baru, berat kosong: 1.630 kg, berat muatan maksimum: 970 kg, berat keseluruhan: 2.600 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 3.780 mm, lebar ruang muat: 1.810 mm, tinggi ruang muatan: 2.300 mm, volume ruang muat: 15,7 m³, warna: hitam, tinggi konstruksi: 2.680 mm, lebar kerja: 2.290 mm,

Kondisi: baru, berat muatan maksimum: 51.780 kg, berat keseluruhan: 65.000 kg, konfigurasi gandar: 3 gardan, lebar total: 2.540 mm, Perlengkapan: ABS,

Kondisi: baru, berat muatan maksimum: 50.400 kg, berat keseluruhan: 65.000 kg, konfigurasi gandar: 3 gardan, lebar total: 2.540 mm, Perlengkapan: ABS,

Kondisi: baru, berat muatan maksimum: 36.400 kg, berat keseluruhan: 48.000 kg, konfigurasi gandar: 3 gandar, lebar total: 2.540 mm, Perlengkapan: ABS,

Kondisi: baru, berat kosong: 970 kg, berat muatan maksimum: 1.630 kg, berat keseluruhan: 2.600 kg, panjang ruang muatan: 3.780 mm, lebar ruang muat: 1.810 mm, tinggi ruang muatan: 2.300 mm, ukuran ban: 185/65R14,

Kondisi: bekas, berat keseluruhan: 45.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 09/2017,

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3,550 x 1,450 x 1,800 mm Weight: 3,500 kg Fodpfx Asvz Hxqjagjpd Total power requirement: 94.75 kW Double-shaft saw MULTIMAX DUO-280 XL - Maximum cutting height: 280 mm - Minimum cutting height: 150 mm (100 mm) - Maximum working width: 300 mm - Minimum workpiece length: 800 mm - Feed speed: 3 – 15 m/min - Saw arbor diameter: 60 mm - Rotation speed: 3,000 rpm - Maximum saw blade diameter: 405 mm - Minimum saw blade diameter: 305 mm - Top saw arbor motor: 45 kW - Bottom saw arbor motor: 45 kW - Feed motor: 4.0 kW - Height adjustment motor: 0.75 kW - Total power: 94.75 kW - Voltage: 400 V / 50 Hz - Feed rollers: ø 140 x 50 mm - Anti-kickback protection - Automatic lubrication system - Automatic star-delta switch - Extraction nozzle: 4 x 140 mm - Working height: 860 mm - Dimensions: L = 3,550 mm, W = 1,450 mm, H = 1,800 mm - Weight: 3,500 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 2500 x 2170 x 2080 mm Weight: 4250 kg Total power requirement: 81 kW Multi-blade Saw MULTIMAX 170-500 XL - Max. working width: 500 mm - Chain width: 500 mm - Max. cutting height: 170 mm - Min. cutting height: 10 mm - Min. workpiece length: 740 mm - Max. saw blade diameter: 505 mm - Min. saw blade diameter: 405 mm - Saw blade bore diameter: 80 mm - Spindle diameter: 60 mm (without bushing) - Speed: 2600 rpm - Feed rate: 2.5 - 24 m/min Fpedpfsvz Hwtjx Aaged - Saw shaft motor: 75 kW - Feed motor: 5.5 kW - Height adjustment motor: 0.75 kW - Total power: 81 kW - Voltage: 400 V / 50 Hz - Digital display for feed speed - Swiveling control panel at eye level - Electrically driven infeed roller integrated into the table with pneumatically controlled top pressure roller - Optical wood detection via light barrier - Electrically driven outfeed roller at discharge side - Heavy-duty roller conveyor at infeed and outfeed - Transport chain with hardened, chrome-plated surface - Saw bushing with a set of flange rings - Kickback protection - Automatic lubrication system - Automatic star-delta starter - Extraction port: 2 x 150 mm - Working height: 820 mm - Machine dimensions (L x W x H): 4850 x 2020 x 1880 mm - Transport dimensions (L x W x H): 2500 x 2170 x 2080 mm - Weight: 4250 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 4460 x 1780 x 1880 mm Weight: 3,500 kg Total power requirement: 57.2 kW Multirip Saw MULTIMAX 155 - Chain width: 350 mm - Cutting height: 10 - 155 mm - Max. saw blade diameter: 405 mm - Min. saw blade diameter: 355 mm - Saw blade bore diameter: 80 mm - Min. workpiece length: 740 mm - Working height: 745 mm - Speed: 2,600 rpm - Feed rate: 2.5 - 24 m/min - Saw spindle motor: 55 kW - Feed motor: 2.2 kW - Total connected load: 57.2 kW - Digital display for feed speed - Saw bushing supplied with a set of flange rings - Anti-kickback device - Automatic lubrication system - Automatic star-delta switch - Infeed roller conveyor length: 1,500 mm - Outfeed roller conveyor length: 1,500 mm - Extraction nozzle: 2 x Ø 150 mm - Transport dimensions: L=2,100, W=1,900, H=1,980 mm - Dimensions with infeed and outfeed roller conveyors: L=4,460, W=1,780, H=1,880 mm - Weight: 3,500 kg - CE version Fpodpfx Ajvz Hwgeaged

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 2100 x 1900 x 1980 mm Weight: 3500 kg Total Power Requirement: 39.2 kW MULTIMAX 350 Multi-Blade Saw - Chain width: 350 mm - Cutting height: 10 - 135 mm - Max. saw blade diameter: 405 mm - Min. saw blade diameter: 355 mm - Saw blade bore: 80 mm diameter - Min. workpiece length: 740 mm - Working height: 745 mm - Speed: 2600 rpm - Feed rate: 2.5 - 24 m/min - Saw spindle motor: 37 kW - Feed motor: 2.2 kW - Total connected load: 39.2 kW - Digital display for feed speed - Saw bush with one set of flange rings - Anti-kickback device - Automatic lubrication system - Automatic star-delta starter - Infeed roller conveyor length: 1500 mm Fjdpfxjvz Hxdj Aagepd - Outfeed roller conveyor length: 1500 mm - Extraction nozzles: 2 x 150 mm diameter - Transport dimensions (LxWxH): 2100 x 1900 x 1980 mm - Dimensions with infeed and outfeed roller conveyors (LxWxH): 4460 x 1780 x 1880 mm - Weight: 3500 kg - CE compliant

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2200 x 1500 x 1580 mm Weight: 2300 kg Total power requirement: 40 kW Multi-blade saw MULTIMAX 300 - Chain width: 300 mm - Cutting height: 10 - 120 mm - Max. saw blade diameter: 380 mm - Min. saw blade diameter: 200 mm - Saw blade bore: 70 mm - Saw spindle diameter: 55 mm - Min. workpiece length: 600 mm (single) / 300 mm (series) - Working height: 740 mm - Table dimensions: 1530 x 760 mm - Speed: 4000 rpm - Feed speed: 7.5 - 30 m/min - Saw spindle motor: 37 kW - Feed motor: 2.2 kW - Total connected load: 40 kW - Digital display for feed speed - Saw bush with one set of flange rings Fodpfx Aovz Hwyoagspd - Anti-kickback device - Automatic lubrication system - Automatic star-delta switch - Extraction port: 2 x 150 mm - Dimensions: 2200 x 1500 x 1580 mm - Weight: 2300 kg - CE compliant design

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1930 x 1580 x 1580 mm Weight: 2,250 kg Total power requirement: 32.57 kW Multi-blade saw MULTIMAX 300 Short - Chain width: 300 mm - Cutting height: 10 – 85 mm - Max. saw blade Ø: 380 mm - Min. saw blade Ø: 200 mm - Saw blade bore Ø: 70 mm - Saw spindle Ø: 55 mm - Min. workpiece length: 530 mm (single) / 200 mm (serial) - Working height: 740 mm Fpsdpfovz Hw Tjx Aaged - Table dimensions: 1530 x 760 mm - Speed: 4,000 rpm - Feed rate: 4 – 30 m/min - Saw spindle motor: 30 kW - Feed motor: 2.2 kW - Total connected load: 32.57 kW - Digital display for feed speed - Saw casing with one set of flange rings - Anti-kickback device - Automatic lubrication system - Automatic star-delta switch - Extraction port: 2 x 150 mm - Dimensions: 1930 x 1580 x 1580 mm - Weight: 2,250 kg - CE version

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2950 x 1620 x 1770 mm Weight: 3300 kg Total Power Requirement: 71.5 kW Double Shaft Circular Saw MULTIMAX DUO-200 - Min./max. cutting height: 10 mm / 180 mm (without lateral pressure roller) - Min./max. cutting height: 45 mm / 180 mm (with lateral pressure roller) - Max. working width: 300 mm - Min. workpiece length: 450 mm (continuous) - Min. workpiece length: 635 mm (single piece) Fpedpfxevz Hxke Aagsd - Feed speed: 4 - 18 m/min - Saw spindle diameter: 50 mm - Spindle diameter: 70 mm with bushing - Speed: 4500 rpm - Max. saw blade diameter: 305 mm - Min. saw blade diameter: 250 mm - Upper saw spindle motor: 30 kW - Lower saw spindle motor: 37 kW - Feed drive motor: 3.0 kW - Upper spindle height adjustment motor: 0.37 kW - Lower spindle height adjustment motor: 0.37 kW - Feed beam height adjustment motor: 0.75 kW - Total power: 71.5 kW - Voltage: 400 V / 50 Hz - Feed rollers Ø 140 x 35 mm - 2x saw bushings, each with one set of flange rings - Kickback protection - Automatic lubrication system - Automatic star-delta switch - Extraction connections: 2 x 150 mm - Working height: 860 mm - Dimensions: L=2950, W=1620, H=1770 mm - Weight: 3300 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 2100 x 1900 x 1980 mm Weight: 3500 kg Total Power Requirement: 77.2 kW Multirip Saw MULTIMAX 170 - Chain width: 350 mm - Cutting height: 10 – 170 mm - Max. saw blade diameter: 505 mm - Min. saw blade diameter: 355 mm - Saw blade bore: 80 mm - Min. workpiece length: 740 mm - Working height: 745 mm - Rotation speed: 2,600 rpm - Feed rate: 2.5 – 24 m/min - Saw spindle motor: 75 kW - Feed motor: 2.2 kW - Total connected load: 77.2 kW - Digital display for feed speed - Saw bush with one set of flange rings Fpjdpfx Aajvz Hwmjgjd - Anti-kickback device - Automatic lubrication system - Automatic star-delta switch - Infeed roller conveyor length: 1,500 mm - Outfeed roller conveyor length: 1,500 mm - Extraction connection: 2 x Ø 150 mm - Transport dimensions (LxWxH): 2100 x 1900 x 1980 mm - Dimensions with infeed and outfeed roller conveyors (LxWxH): 4460 x 1780 x 1880 mm - Weight: 3500 kg - CE compliant

Kondisi: bekas, berat muatan maksimum: 57.900 kg, berat keseluruhan: 73.000 kg, konfigurasi gandar: 3 gardan, pendaftaran pertama: 06/2024, inspeksi berikutnya (TÜV): 07/2026, lebar total: 2.540 mm, Perlengkapan: ABS,

Kondisi: bekas, berat muatan maksimum: 51.870 kg, berat keseluruhan: 65.000 kg, konfigurasi gandar: 3 gardan, pendaftaran pertama: 03/2025, inspeksi berikutnya (TÜV): 03/2026, lebar total: 2.540 mm, Perlengkapan: ABS,

Kondisi: bekas, Tahun pembuatan: 2014, Contact Theo Lelie for further information. Fsdpfjxtqkwex Aagspd