Beli Ventilator bekas (1.987)

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 22.300 h, jenis arus masuk: tiga fasa, berat keseluruhan: 1.600 kg, lebar total: 2.100 mm, panjang total: 1.800 mm, tinggi total: 3.700 mm, luas filter: 222 m², kapasitas hisap: 20.000 m³/jam, Novus AirTower FT0120018 EC Filter Ventilation Tower - 20,000 m³/h Industrial filter ventilation for welding halls — suitable for numerous technological processes in production plants, especially during metalworking operations. Very low energy consumption thanks to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with built-in frequency inverter also allows for speed control / energy consumption / device performance at 60%, 80%, and 100% operating ranges. Top air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle, the device does not require ductwork installation. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning is pressure-differential based – no loss of compressed air. Layered ventilation principle: Contaminated air is drawn in from above, filtered, and then released at floor level as respirable clean air, without creating drafts, at a velocity of less than 1.2 m/s — exactly where staff breathe the air. Coverage is up to 270 degrees. The Airtower operates according to the layered ventilation principle, which is recommended by trade associations as the best method of air circulation. Year of manufacture: 2017 Operating hours: 22,300 Specifications: Prsdpfx Aboxxhwrj Isd - 4 x EC fans, each 3.9 kW - Airflow: 20,000 m³/h - Filtration surface area: 222 m² - 6 patron filter cartridges - Fine final filter - Fire protection package - EC Blue Energy Pack - Hall dust sensor – with LED indicators, transmits dust data to the Airtower for automatic power adjustment depending on dust concentration in the hall. Energy savings are achieved depending on the current dust load in the facility. Very quiet operation. Stock number: 1067

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.806 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 05/2018, panjang total: 13.400 mm, lebar total: 2.460 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2018, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis pendinginan: udara, de Psdpfjxznylsx Ab Iord

Kondisi: bekas, Tahun pembuatan: 2025, The radial fan enables operation with increased negative pressure power, allowing for the extraction of various types of contaminants, thanks to a special impeller blade system that has been contoured at the appropriate angle. The radial fan has been designed specifically for applications in the woodworking, furniture, automotive, agricultural, and manufacturing industries. Thanks to the many years of experience of CORMAK's team, the FAN series of radial fans was developed. The design of a new technological line allowed us to create the LineWind metal impeller system. This is the key feature of radial fans, enabling the efficient extraction of various types of contaminants due to the specially angled blade system. The radial fan is intended for use in woodworking, furniture, automotive, agricultural, and manufacturing industries. Radial fans are used for: - Transporting chips, sawdust, and fine granulates - Extracting dusty air Podpfx Absxzr I Ts Iord - Local exhaust systems - Drying systems - Dehumidifiers Multi-bladed metal impeller! High efficiency ensured by a balanced rotor. Thermal overload protection of windings (thermal sensor). The extraction system construction features additional anti-vibration feet at the base, guaranteeing stable and vibration-free operation of the unit. An emergency stop button meeting the requirements of PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded, flexible, and durable gaskets at key points, allowing the system to achieve high negative pressure without losses at the connection points. Reliability confirmed by Polish users who enjoy working with our machines on a daily basis. Technical specifications: MAX. AIRFLOW: 4000 m³/h INLET DIAMETER: 200 mm OUTLET DIAMETER: 180 mm MOTOR SPEED: 2850 rpm DIMENSIONS: 575 x 550 x 500 mm MOTOR POWER / VOLTAGE: 2.2 kW / 400V WEIGHT: 35.5 kg NOTE!! The machine is a returned unit. It has signs of corrosion and mechanical damage to the housing.

Kondisi: bekas, jarak tempuh: 29.541 km, daya: 265 kW (360,30 hp), pendaftaran pertama: 01/2024, jenis bahan bakar: diesel, jumlah tempat duduk: 50, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, warna: putih, rem: retarder, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: baru, daya: 110 kW (149,56 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, warna: putih, jumlah tempat duduk: 30, Tahun pembuatan: 2025, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 20.700 h, jenis arus masuk: tiga fasa, berat keseluruhan: 1.600 kg, lebar total: 2.100 mm, panjang total: 1.800 mm, tinggi total: 3.700 mm, kapasitas hisap: 20.000 m³/jam, Novus AirTower FT0120018 EC Filter Ventilation Tower - 20,000 m³/h Industrial filter ventilation for welding halls — suitable for various technological processes primarily in metalworking production facilities. Very low energy consumption thanks to the use of innovative fans. Equipped with an EC fan instead of a standard fan, providing SIGNIFICANT energy savings by minimizing power consumption. The EC fan with integrated inverter also enables adjustable speed control, energy use, and unit performance in 60%, 80%, and 100% working ranges. Top-side air intake and draft-free bottom-side air discharge — delivering purified air directly to workstations. Layer (stratified) filter ventilation principle; device does not require pipework installation. Self-cleaning cartridge filter elements — cleaned automatically using compressed air pulses during operation. Filter cleaning based on pressure differential — zero loss of compressed air. Stratified ventilation function: contaminated air is drawn in from above, filtered, and released at floor level as breathable clean air, without creating drafts, at a velocity below 1.2 m/s. This targets the critical breathing zone for workers across a wide, 270-degree radius. The Airtower operates based on the stratified ventilation principle, recommended by trade unions and considered the optimal form of air circulation. Year of manufacture: 2017 Operating hours: 20,700 Specifications: - 4 EC fans, each rated at 3.9 kW - Airflow: 20,000 m³/h - Filter surface area: 222 m² - 6 cartridge filter elements - High-efficiency final filter - Fire protection package - EC Blue Energy Package - Hall dust sensor – with LED indicators, relays dust level data to the Airtower for automatic regulation of operating power. Predpfjxxalnsx Ab Iod Energy savings correspond to the real-time dust concentration in the hall. Very quiet operation Stock/Inventory number: 1066

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.809 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 01/2020, panjang total: 14.040 mm, lebar total: 2.600 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2019, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 480 V, arus masuk: 110 A, jenis arus masuk: AC (pendingin udara), frekuensi input: 400 Hz, de Pjdpfx Ajxzdpcsb Ijrd

Kondisi: baru, Total power requirement: 11 kW Stand width: 3050 mm Pressure: 125 t Bending length: 3050 mm Number of axes: 3 Weight approx.: 9600 kg Dimensions (LxWxH): 3660 x 1340 x 2400 mm Stroke: 200 mm Backgauge: 500 mm Table height: 900 mm Oil tank capacity: 120 l Press brake control unit: Esa S 640 CNC 15 2D graphic display – touchscreen Control unit panel: Swivelling pendant arm Optional hydraulic press brake valve: With CE safety signals Press brake safety PLC: Mcs PLC safety controller Press brake laser safety system: DSP-AP safety block (manual laser height adjustment) Press brake backgauge: X-axis, 500 mm reach, including 2 fingers, manually adjustable in height and laterally. Backgauge stop fingers: Standard Press brake upper tool clamping: Manual European type, L: 150 mm (Promecam) Press brake upper tool: Eurostamp 1260 / Standard (835 mm and 805 mm, divided into 595 mm and 210 mm) Press brake lower die holder: Mechanical European type, standard width (Promecam) Press brake crowning: CNC adjustable motorised crowning (V-axis) Press brake lower die: Eurostamp 2067 / Standard (835 mm and 805 mm, divided into 100 mm left, 395 mm, 210 mm, and 100 mm right) Press brake Front support arms for press brake: 2 supports, manually adjustable in height and lateral position. Pedpfx Ajhutz Sob Ijrd Electrical system: 380 V–660 V, 50–60 Hz, 3 Ph (IE3) Cabinet cooling system: Fan ventilation Number of foot pedals: One Label group: Label group English

Kondisi: bekas, jarak tempuh: 935.596 km, daya: 375 kW (509,86 hp), pendaftaran pertama: 04/2021, jenis bahan bakar: diesel, jumlah tempat duduk: 65, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, warna: putih, rem: retarder, Perlengkapan: ABS, kamar mandi, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: baru, daya: 110 kW (149,56 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, warna: putih, jumlah tempat duduk: 30, Tahun pembuatan: 2025, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: baru, daya: 368 kW (500,34 hp), jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, rem: retarder, warna: biru, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2025, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 480 V, jenis arus masuk: AC (pendingin udara), jenis perlindungan (kode IP): IP20, Schneider/Telemecanique Altivar 21 VFD, Modell ATV21WU55N4 (5,5 kW, 380–480 V). Dieser frequenzumrichter ist speziell für HLK-Anwendungen (Heizung, Lüftung, Klima) optimiert und eignet sich ideal zur effizienten Drehzahlregelung von 3-Phasen-Motoren wie Ventilatoren, Pumpen und Gebläsen. Das Gerät verfügt über eine übersichtliche Front-Bedieneinheit, Modbus-Kommunikation und eine sanfte Pulsweitenmodulation (PWM) zur Motorkontrolle. Technische Daten: - 5,5 kW (7,5 PS) - 380–480 V 3~ Ein-/Ausgang - Maximalstrom: 12 A - Frequenz: 50/60 Hz - Schutzart: IP20 - Integriertes Bedienfeld (RUN/STOP, MODE, ENT, Auf/Ab) - Modbus-Kommunikationsschnittstelle (nativ), BACnet je nach Parametrierung möglich Predpfxsxy Rd Rj Ab Ijd Das Gerät befindet sich in gutem Betriebszustand und wurde aus einer funktionierenden Lüftungsanlage (Beschriftung: Putimo vent. SVRPV-7) demontiert. Frequenzumrichter (VFD) Schneider / Telemecanique Altivar 21 (ATV21WU55N4) Hersteller: Schneider Electric / Telemecanique Modell: Altivar 21 – ATV21WU55N4 Typ: HVAC-optimierter Frequenzumrichter für 3-Phasen-Asynchronmotoren Nennleistung: 5,5 kW / 7,5 PS Eingangsspannung: 380–480 V AC, 3-phasig Ausgangsspannung: 380–480 V AC, 3-phasig Frequenz: 50/60 Hz Ausgangsstrom: ≤ 12 A Regelverfahren: PWM-Wechselrichter Schutzart: IP20-Gehäuse Schnittstelle: Integriertes Bedienfeld (RUN/STOP, MODE, ENT, Auf/Ab) Kommunikationsprotokolle: Modbus (nativ) – BACnet-fähig nach Einstellung Seriennummer: 6W0634001003 (Frankreich) Baureihe: V1.4 IE04 Montage: Schaltschrank- oder Wandmontage

Kondisi: baru, Motor power: 13.2 Column clearance: 2700 Pressure: 200 Bending length: 3200 Number of axes: 4 Dimensions (LxWxH): 3,700 x 1,700 x 2,700 mm Oil capacity: 200 Weight approx.: 14,000 kg Press Brake Control Unit: Delem DA 58T 2D graphic touchscreen Predpfx Aopblztob Ied Controller Panel: Swiveling pendant arm Optional Hydraulic Press Brake Valve: With CE safety signals Press Brake Safety PLC: Mcs Plc safety PLC Press Brake Laser Safety System: Dsp-Ap safety block (manual laser height adjustment) Backgauge for press brake: X-axis, 500 mm stroke, including 2 fingers, manually adjustable in height and laterally. Backgauge stop fingers: Standard CNC Crowning motorized adjustable (V-axis) Number of foot pedals: One Label group: Label group English

Kondisi: bekas, jarak tempuh: 2.480 km, daya: 315 kW (428,28 hp), pendaftaran pertama: 11/2025, jenis bahan bakar: diesel, jumlah tempat duduk: 60, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, warna: putih, rem: retarder, Perlengkapan: ABS, dapur onboard, kamar mandi, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, kecepatan rotasi (maks.): 13.555 rpm, kecepatan rotasi (min.): 2.987 rpm, daya: 710 kW (965,33 hp), de Psdpexy If Sofx Ab Ijrd

Kondisi: baru, en-US: Bending length: 3050 mm Total power requirement: 15 kW Pressure: 200 t Podpfx Ashutz Iob Ijrd Number of axes: 3 Dimensions (LxWxH): 3680x1350x2500 mm Oil capacity: 210 l Weight approx.: 8500 kg Press brake control unit: Esa S 640 CNC 10 2D graphic display – touchscreen Control unit operating panel: Swiveling pendant arm Optional hydraulic press brake valve: With CE safety signals Press brake safety PLC: Mcs PLC safety PLC Press brake laser safety system: DSP-AP safety block (manual laser height adjustment) Backgauge for press brake: X-axis, 500 mm travel, includes 2 fingers, manually adjustable in height and lateral position. Backgauge press fingers: Standard Upper tool clamping for press brake: Manual European type, L: 150 mm (Promecam) Press brake upper tool: Eurostamp 1260 / standard (835 mm and 805 mm split into 595 mm and 210 mm) Lower die holder for press brake: Mechanical European type, standard width (Promecam) Press brake crowning: CNC-adjustable motorized crowning (V-axis) Lower die for press brake: Eurostamp 2067 / standard (835 mm and 805 mm split into 100 mm left, 395 mm, 210 mm, and 100 mm right) Front supports for press brake: 2 supports, manually adjustable in height and lateral position Electrical system: 380 V–660 V, 50–60 Hz, 3-phase (IE3) Control cabinet cooling system: Ventilation with fan Number of foot pedals: One Label group: Label group in English Packaging method: Plastic cover with stretch film

Kondisi: bekas, jarak tempuh: 403.476 km, daya: 182 kW (247,45 hp), pendaftaran pertama: 07/2016, jenis bahan bakar: diesel, jumlah tempat duduk: 39, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, warna: putih, rem: retarder, Perlengkapan: ABS, pemanas parkir, pendingin udara,

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 12 batang, tekanan: 28 batang, kapasitas tangki oli: 200 l, de Psdoxy Hk Topfx Ab Ijrd

Kondisi: baru, Tahun pembuatan: 2022, Dimensions (LxWxH): 3660 x 1340 x 2500 mm Number of axes: 3 Pressure: 120 tons Approximate weight: 7,000 kg Oil capacity: 200 liters Motor power: 11 kW Press brake control unit: Esa S 630 CNC 10 2D graphic display – touchscreen Control panel: Pivoting pendant arm Optional hydraulic press brake valve: With CE safety signals Press brake safety PLC: Mcs PLC safety PLC Prjdehut Aajpfx Ab Ied Press brake laser safety system: Dsp-Ap safety block (manual laser height adjustment) Press brake backgauge: X-axis, 500 mm travel, including 2 fingers, manually adjustable in height and laterally. Press brake backgauge stop fingers: Standard Xf rear and side guards: Available (CE-compliant model) Press brake upper tool clamping: Manual European type, length: 150 mm (Promecam) Press brake upper tool: Eurostamp 1260 / Standard (835 mm and 805 mm, subdivided into 595 mm and 210 mm) Press brake lower die holder: Mechanical European type, standard width (Promecam) Press brake crowning: CNC adjustable motorized crowning (Y-axis) Press brake lower die: Eurostamp 2067 / Standard (835 mm and 805 mm, subdivided into 100 mm left, 395 mm, 210 mm, and 100 mm right) Press brake stroke Front support arms for press brake: Xf front support Front support for press brake: 2 supports, manually adjustable in height and lateral position. Electrical system: 380 V-660 V, 50-60 Hz, 3 Ph (IE3) Control cabinet cooling system: Fan ventilation Number of foot pedals: One Label group: Label group English Packaging method: Plastic cover with stretch film.

Kondisi: bekas, jarak tempuh: 568.235 km, daya: 220 kW (299,12 hp), pendaftaran pertama: 09/2014, jenis bahan bakar: diesel, jumlah tempat duduk: 35, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, warna: putih, Perlengkapan: ABS, pemanas parkir, pendingin udara,

Kondisi: bekas, jarak tempuh: 395.000 km, daya: 335 kW (455,47 hp), pendaftaran pertama: 04/2022, jenis bahan bakar: diesel, jumlah tempat duduk: 51, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, warna: kuning, rem: retarder, Perlengkapan: ABS, dapur onboard, kamar mandi, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 45.000 km, daya: 265 kW (360,30 hp), pendaftaran pertama: 09/2023, jenis bahan bakar: diesel, jumlah tempat duduk: 52, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, warna: putih, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, jarak tempuh: 338.614 km, daya: 317 kW (431,00 hp), pendaftaran pertama: 01/1995, jenis bahan bakar: diesel, jumlah tempat duduk: 53, tipe perpindahan gigi: mekanis, kelas emisi: euro2, warna: putih, rem: retarder, Perlengkapan: ABS, dapur onboard, kamar mandi, pendingin udara,