Beli Winkelbieger Wb 100 bekas (24.995)

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Kwedpfsvb Hanjx Ag Row Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Kedpfxjvb E Uqe Ag Roww Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, tinggi konstruksi: 480 mm, tinggi angkat: 640 mm, berat kosong: 1.330 kg, daya angkat: 8.000 kg/m, panjang total: 1.000 mm, lebar meja: 1.600 mm, Dari likuidasi operasional: Meja angkat Allendorfer kapasitas 8000kg Model: SHT 1/100-08 Tahun pembuatan: 1996 Silinder telah diganti sealnya beberapa bulan lalu Ukuran meja: 1000x1600mm Ksdoywdz Hepfx Ag Rjww Tinggi minimum 480mm - maksimum 1120mm Emergency stop melalui list keamanan keliling samping 380Volt Berat 1330kg

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas), Italian-made BIGonDRY wood drying kiln 3 chambers – each: - width: 9.6 m - length: 7.5 m - gate height: 4 m Kwsdsvkxmfopfx Ag Row Each chamber holds approx. 100 m³ – total capacity 300 m³ Kilns have only been used for trial runs – virtually like new. Offered as a complete set, with full documentation, automation system, laptop, and internet connectivity for remote operation.

Kondisi: bekas, gaya penekanan: 100 t, tegangan masuk: 380 V, Press hidrolik Merek: Francisco CAMP Gaya: 100 ton Langkah maksimum piston: 150 mm Ksdsx Syc Nopfx Ag Rsww Motor: 2HP Daya: Tiga fase 380V Pengoperasian via pedal/tombol Ukuran meja: 780x330 mm Lebar bukaan press: 780 mm Jarak bebas antara meja dan dasar piston: 400 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Used CNC Horizontal Boring and Milling Machine Brand: AYCE Model: AC100-k4 Serial No.: 740 Year: 1998 Power: 16 kW Weight: 12,700 kg MODEL AC100-K4 WITH CONTINUOUS FEED VARIATION Numerical Control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bed supports: 4 (K4) OPTIONS: - Heidenhain CNC - Automatic rotary table positioning 4 x 90° - Vertical travel 1200 mm (instead of the 1000 mm standard for this model) - Coolant system - Facing plate and clamping arm - Universal vertical head, Hurón-type, with hydraulic tool clamping - Steady rest for 1200 mm vertical travel - 4th AXIS (B) table rotation digital readout Main spindle: - Spindle diameter: 100 mm - Internal taper: ISO 50 with quick-action tool clamping (instead of Morse 5) - Milling cutter holder diameter: 171.45 mm - Horizontal spindle travel: 700 mm - Vertical spindle travel: 1200 mm - Number of spindle speeds: 18 - Speed range: 12–1200 rpm - Maximum distance between plate and steady rest: 2250 mm Feeds: - Number of working feed rates in all directions: UNLIMITED - Min/max working feeds: 2–1500 mm/min - Rapid traverse on carriages and head: 3000 mm/min - Rapid traverse – main spindle: 1500 mm/min - Rapid traverse – table rotation: 600 degrees/min Rotary Table: - Rotary table dimensions: 1100 x 1200 mm - Longitudinal travel (without steady rest): 1500 mm - Longitudinal travel (with steady rest): 1200 mm Kwjdpfx Aeizxbieg Row - Cross travel: 1700 mm - Max. distance between spindle axis/table center without steady rest: 1975 mm - Max. distance between spindle axis/table center with steady rest: 1600 mm Automatic centralized lubrication. Hardened and ground guideways. Telescopic way covers. Ball screws on all 3 axes. Automatic hydraulic locks on all axes.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, panjang langkah: 400 mm, - Capacity: 100 tons Kwodjwfnqzspfx Ag Row - Cylinder stroke: 400 mm - Working width: 1000 mm - Pressure gauge - Emergency stop - 400V

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, panjang langkah: 300 mm, - Capacity 100 tons - Cylinder stroke 300 mm Kwodpfx Agowg Smie Rsw - Working width 1070 mm - 2 speeds - With V-blocks/pressure plates - Manometer - Emergency stop - Documentation - 400V

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Alle unsere Produkte werden sorgfältig hergestellt und verfügen über 1 Jahr Garantie! *Montage und Schulung des Bedienpersonals sind KOSTENLOS! Der FTC-200-S Mobile Kegelbrecher (mit Sieb) besteht aus einem Aufgabebunker, einem Kegelbrecher, einem Haldenband und einem Generator. Der FTC-200-S Mobile Kegelbrecher (mit Sieb) wird ferngesteuert auf einem Raupenfahrgestell bewegt und erledigt dank seiner Geländegängigkeit auf allen schwierigen Klimabedingungen und unwegsamem Gelände zuverlässig alle Bedienbefehle. Der FTC-200-S Mobile Kegelbrecher (mit Sieb) wurde speziell für das Zerkleinern von Steinen konzipiert und mit höchster Sorgfalt gefertigt und ist mit einer Zerkleinerungskapazität von 100–200 t/h der führende mobile Kegelbrecher seiner Klasse. Kodpjyuuaaofx Ag Rjww Für den Einsatz des FTC-200-S Mobile Kegelbrecher (mit Sieb) ist keine zusätzliche Infrastruktur erforderlich. Er ist mobil, wird per Fernsteuerung bewegt und passt sich allen schwierigen Bodenverhältnissen an. TECHNISCHE DATEN: Modell: FTC 200-S Brechertyp: Kegelbrecher Siebanlagengröße: 1.300 x 3.000 mm Produktionskapazität: 100–200 t/h Maximale Aufgabegröße: 185 mm Gesamtleistung: 300 kVA Gewicht: 46.000 kg FÜR WEITERE INFORMATIONEN RUFEN SIE UNS BITTE AN!!!

Kondisi: bekas, jarak tempuh: 11.546 km, daya: 135 kW (183,55 hp), jenis bahan bakar: listrik, tipe perpindahan gigi: otomatis, konfigurasi gandar: 4x2, jarak roda: 3.300 mm, pendaftaran pertama: 06/2023, warna: putih, jumlah tempat duduk: 3, Tahun pembuatan: 2023, Perlengkapan: ABS, kendali jelajah, kontrol traksi, kunci sentral, lampu kabut, pemanas jok, pendingin udara, pintu geser, program stabilitas elektronik (ESP), sensor parkir, sistem immobilizer, sistem navigasi,

Kondisi: baru, Condition: new Delivery time: approx. 3-6 weeks from order Country of origin: Turkey Price: €5,010 Leasing rate: €96.69 Load capacity: 100 kg Nominal load center: 150 mm Nominal eccentricity: 150 mm Table rotation: 360° Nominal tilting moment: 120 kgm Voltage / Frequency: 230 V / 50 Hz Rotation motor: 0.25 kW Tilting motor: 0.25 kW Rotation speed: 0.1 - 3 rpm Tilting time: 30 s Table diameter: 350 mm T-slots: M12x6 mm Height of rotation center (horizontal): 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotational and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control unit, and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. The tables feature radial T-slots for rapid clamping of workpieces. Tilting and rotation are driven by steel gears. For safety, the positioner is equipped with a reduction gearbox that holds the table in the desired position. Foot pedal Connection for signal to welding machine Touch panel for the following functions: - Rotation speed - Operating mode (manual, segment cycle, circular) OPTION: Ksdpfxex Urqwj Ag Rjww Pneumatic centering device

Kondisi: baru, Tahun pembuatan: 2025, Rotary vane oil-bath vacuum pump designed for operation with a MAP atmosphere (high oxygen concentrations). Nominal flow rate: 100 m³/h at 50Hz. Ultimate vacuum: 0.5 mbar abs. For any questions, please contact us. Brand new pump with a 12-month warranty. Kodpfx Agefk Sizo Rsww

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Maximum wheel diameter: 100 mm Wheel width: 26 mm Module – max.: 3 Module – min.: 0.1 Control: Siemens 840 D SL Operating hours: 9,598 h Total power requirement: 45 kW Machine weight: approx. 7 t Space requirement: approx. 4 x 3 x 2.5 m Gleason 100S Gear Shaping Machine For manufacturing cylindrical gears with internal and external teeth, as well as other regularly recurring profiles and shapes on cylindrical workpiece surfaces, including profiling in single-part processes. Technical Data: Nominal workpiece diameter: 100 mm Maximum outside diameter: 150 mm Nominal machine module: approx. 3 mm (Reference value, depending on the specific machining task.) Shaping spindle stroke range: 0–3,000 strokes/min Manual stroke position adjustment range: 20 mm Maximum gear width: 26 mm Minimum hydrostatic diagonal guide pitch height: 400 mm Minimum/maximum distance between tool and workpiece axis: -20 / +180 mm Machine column tilt range (manual): -1° / +11° Tool holder (manual clamping): HSK-D63 (Hollow shank taper according to DIN 69063) Ksdpjv Ehbbsfx Ag Roww Machine weight: approx. 7,000 kg With robot cell

Kondisi: sangat baik (bekas), panjang kerja 3300 mm Kwodpfxsyvhc Eo Ag Row tinggi kerja 1800 mm 3 silinder vertikal 2 silinder horizontal mode operasi manual

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Linia spawalnicza CLOOS QIROX – system robotów na podwójnym bramowcu – 2020 Opis ogólny Na sprzedaż: wysokowydajna linia spawalnicza oparta na renomowanym systemie CLOOS QIROX, przeznaczona do zautomatyzowanego spawania średnich i dużych konstrukcji stalowych. System składa się z dwóch robotów spawalniczych zamontowanych na bramie, pracujących na wspólnej osi liniowej, w połączeniu z pozycjonerami obrotowymi, co umożliwia efektywne spawanie długich elementów i złożonych zespołów. Jest to nowoczesna (2020), przemysłowa linia przeznaczona do ciężkich prac spawalniczych, konstrukcji stalowych, ram oraz produkcji seryjnej. Główne wyposażenie i konfiguracja Roboty Model: CLOOS QIROX QRC 410 Rok: 2020 Typ: 6-osiowy robot przegubowy Udźwig: 10 kg (na nadgarstku) Powtarzalność: ±0,1 mm Zakres pracy: ok. Ø 5000 mm Procesy spawania: MIG/MAG, TIG, opcjonalnie cięcie i integracja sensorów ✔ Wysoka dynamika i precyzja ✔ Modułowa budowa zapewniająca elastyczność zastosowań ✔ Przystosowany do złożonych ścieżek spawalniczych i długich spoin Sterowniki Model: QIROX Controller QC2.02 / QRC 410 Sterownik przemysłowy oparty o PC Równoczesne sterowanie robotem + osiami zewnętrznymi Zasilanie: 3x 400V / 32A 3x 400V / 19A Częstotliwość: 50/60 Hz Moc: do 21,5 kVA ✔ Solidna obudowa sterownika ✔ Optymalny interfejs operatora ✔ Wysoka dokładność toru oraz stabilność procesu Pozycjonery (stoły obrotowe) Model: CLOOS QR-CTU-100-09 2.0 Udźwig: 10 000 N (≈1 000 kg) – pozycja V 20 000 N (≈2 000 kg) – pozycja H Moment obrotowy: do 1600 Nm Moment przechyłu: 8800 Nm Moc napędu: 4,5 kW Kwjdeyvaahopfx Ag Rjw ✔ Programowalne osie zsynchronizowane z robotem ✔ Idealny do złożonych kształtów i detali ✔ Zapewnia optymalną pozycję i dostęp do spawu Układ systemu Podwójny bramowiec (2 roboty na torze liniowym) Długi obszar roboczy do spawania dużych elementów Zintegrowane stoły robocze pod długie części Idealny do: ram konstrukcji stalowych długich zespołów spawanych Typowe zalety tej konfiguracji: Rozszerzony zakres pracy dzięki osi liniowej Możliwość jednoczesnych procesów spawania Wysoka produktywność i ograniczenie czasu cyklu Zalety ✔ Wysoka wydajność i powtarzalność ✔ Doskonała jakość spoin ✔ Elastyczna konfiguracja (różne detale i gabaryty) ✔ Sprawdzona, niezawodna technologia CLOOS ✔ Zarówno do produkcji seryjnej, jak i jednostkowej Typowe zastosowania Konstrukcje stalowe Ramy maszyn Komponenty motoryzacyjne Elementy budowlane Produkcja ciężka Podsumowanie parametrów technicznych Roboty: 2x QIROX QRC 410 Osie: robot 6-osiowy + osie zewnętrzne Sterowanie: QIROX QC2.02 Pozycjonery: udźwig do 2 000 kg Zasilanie: 400V / 50–60 Hz Rok produkcji: 2020 Typ linii: bramowa linia spawalnicza Stan techniczny i dostępność Stan: bardzo dobry, w pełni sprawny Możliwość testów pod napięciem Do demontażu i wysyłki na całym świecie

Kondisi: bekas, nomor mesin/kendaraan: 13260, Diameter rotor: 600 mm Lebar rotor: 1000 mm Pisau rotor: 5 Pisau stator: 2 baris Penampang masuk sekitar 720 x 980 mm Kedpfx Ajyr Txcsg Rjww Motor penggerak: 75 kW Penggiling basah

Kondisi: bekas, nomor mesin/kendaraan: 13213, Rotor diameter: 600 mm Rotor width: 1000 mm Number of rotor knife rows: 7 Number of stator knife rows: 2 Feed opening approx. 720 x 980 mm Drive motor: 90 kW Kwodsyr Tu Depfx Ag Row

Kondisi: bekas, nomor mesin/kendaraan: 11634, Diameter rotor: 600 mm Kodjyr Tl Ajpfx Ag Rsww Lebar rotor: 1000 mm Rotor 6 pisau – rotor pemotong silang-gunting 2 baris pisau stator Penampang masuk sekitar 650 x 100 mm Motor penggerak 75 kW Fitur mesin: Rotor pemotong silang-gunting memastikan penerimaan dan distribusi material yang optimal, sehingga menghasilkan kinerja tinggi dengan konsumsi energi yang rendah. Pembukaan elektro-hidrolik pada bagian atas mesin dan keranjang saringan. Saringan dapat diputar 180° dan digunakan kembali setelah keausan satu sisi, penyesuaian pisau rotor dari luar mesin menggunakan alat penyetel mengurangi waktu henti.

Kondisi: bekas, nomor mesin/kendaraan: 8802, Luas penampang masuk sekitar 650×1000 mm Rotor 3-pisau (pisau dipasang secara offset) 2 baris pisau stator Diameter rotor 500 mm Lebar rotor 1000 mm Kedsyr Tiujpfx Ag Roww

Tahun pembuatan: 2006, jam operasional: 65.945 h, Kondisi: siap digunakan (bekas), Data Umum Berat mesin: 2500 kg Unit Kontrol Kwjdpfx Agox D Nh Ne Rew Merek: FANUC Penggerak Utama Rentang kecepatan spindel: 4500 rpm Daya motor spindel: 7,5 kW Takamaz X-100 ini diproduksi tahun 2006. Mesin bubut horisontal yang kokoh dengan diameter putar maksimum 203 mm, kecepatan spindel hingga 4500 rpm, dan diameter chuck 153 mm. Dengan berat 2500 kg, mesin ini telah menjalani overhaul spindel dan ball screw pada tahun 2021. Jika Anda mencari kemampuan pembubutan berkualitas tinggi, pertimbangkan mesin Takamaz X-100 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Tipe Aplikasi Pembubutan

Kondisi: baru, Pressure: 100Motor: 15Installation height: 500Stroke length (max.): 400Table size: 800 x 600Ram surface: 800 x 600Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750Weight approx.: 5,500Oil capacity: 200Control / key switch: 1. Set-up mode: Manual without light sensor (max. 10mm/sec. speed) 2. Automatic mode (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs. Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110 mm/sec – Retract 200 mm/sec – Pressure: 9 mm/sec Installation height: 500mm Stroke length: 400mm Table plate: 800 x 600 – (with T-slots) (custom design possible) Ram plate: 800 x 600 – (with T-slots) Table height: 850mm (floor to top of table) ----- Hydraulics accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control accessories: Siemens S7-1200 Main control cabinet Swiveling operator's console Safety PLC – SICK Light sensors SICK 700 + 150mm Linear measuring scale for setting stroke length 9” PLC screen – Siemens (German & English) Movable two-hand operation Ethernet connection for remote maintenance Kjdpfjm Nntysx Ag Roww Alarm indicator for malfunctions (light & sound) Dual work area lighting 8 free I/O on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors can be moved to the rear)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1992, Peddinghaus Gunting Profil Baja Hidraulik Mesin hidraulik dengan 5 stasiun: Penekukan, pemotongan pojok, pemotongan baja strip, baja sudut, material padat; aktivasi pelubangan dengan tuas tangan, pemotongan profil baja dengan pedal kaki Jangkauan punch 510 mm, Tekanan kerja 60 ton Jarahan 510 mm Kemampuan pemotongan 500 x 12 atau 400 x 16 mm Diameter punch 27 mm dalam 17 mm Diameter punch 39 mm dalam 12 mm Baja bulat 45 mm Baja kotak 40 mm Baja sudut 120 x 13 mm Ksdpfxsyvzcrj Ag Roww Baja strip 500 x 12 mm Daya 7,5 kW Isi oli 80 liter Berat 3 ton Harga: EUR 3.750 + PPN, ex lokasi.

Kondisi: bekas, 8b425937 Kwedpfsyr Sm Sex Ag Row

Kondisi: bekas, 8b425937 Kwjdpfjyr Sl Iex Ag Rjw

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 10.000 h, Contact Theo Lelie for further information. Ksdpfsx Dmugsx Ag Rjww