Beli Winter Sbs 8 70 bekas (498)

Kondisi: baru, Tahun pembuatan: 2026, de-cleaner-6500ls-2024 Bedpjyk Icyjfx Aiyjlh

Kondisi: baru, Tahun pembuatan: 2026, en Bljdpfxjyk Icmo Aiyjh

Kondisi: baru, Tahun pembuatan: 2026, Cutting width 450 mm Weight 5,500 kg Working height 850 mm WINTER multi-blade saw MULTIMAX 175 M4 + VISUAL OPTIMIZATION SYSTEM VISUAL OPTIMIZATION SYSTEM: The operator places the raw boards onto the chain conveyor. The crossfeed is started by pressing a manual button. While the board is being transported beneath the visual measuring system, it is measured from above. The determined usable board width serves as the basis for 2D optimization. The line can be operated in two modes: 1. Automatic mode without consideration of quality The detected usable board surface is optimized in accordance with the pre-programmed width/length combinations. 2. Semi-automatic mode with quality offset The usable board surface can be corrected by marking different quality zones across the board width. Quality marking is done via the touchscreen. Optimized boards are handed over to the infeed and positioning system, which fixes the board using two positioning hooks. Conveyor belts and upper pressure rollers guide the board precisely into the MULTIMAX 175 M4. Function: The board measurement takes place during the crossfeed. To ensure proper measurement, the narrow side of the board must face upwards. Automatic measurement provides information on: Total width of the board Position and width of the board edge Effective usable width Board length (within the permitted grid) By entering an offset, parts of the board edge can be permitted for certain products. 2D Optimization Program: Width: Optimization based solely on width according to cut list for maximum material yield. Price: Additionally, prices are stored in the cut list; the system optimizes for maximum value. Quantity: Required quantities are considered, allowing the machine to process orders quickly. Based on the stored lengths and widths, the vision system performs a complete 2D optimization. All input data is saved and analyzed, allowing any cut to be checked at any time. The quality functions module allows the operator to overwrite the measured board width and define quality zones. The updated optimization is displayed on the touchscreen. Up to four quality levels are possible. However, the quality offset function reduces the maximum line throughput. Technical parameters Feed speed 50 m/min Maximum infeed width 800 mm Infeed length 800–4000 mm Bledpjyk Icgjfx Aiyjh Feed platform motor power 0.75 kW Working height 870 mm Number of cross chains 6 Chain length 2850 mm Conveyor weight 1.2 t Visual scan system weight 1.8 t Servo power of positioning hooks 2 × 800 W Horizontal feed speed 20 m/min Horizontal feed motor power 0.75 kW Longitudinal feed speed 10–60 m/min Longitudinal feed motor power 1.5 kW Infeed system weight 1.4 t MULTIMAX 175 M4: Function: Optimization software for controlling the movable saw units includes: Industrial PC with touchscreen - Input of saw lists, display of optimization results, machine status, error messages Multifunction handheld device for quality marking and width measurement Laser for width measurement Each handheld unit controls a freely positionable saw arbor Software opti...

Kondisi: baru, Tahun pembuatan: 2026, Working area 500x300 mm Working height 100 mm Weight 120 kg WINTER LASERMAX MIRA 5 5030-60W LASER ENGRAVING AND CUTTING MACHINE Technical specifications: - Certified to laser class 1 for closed operation - Working area X, Y: 500 x 300 mm - Electrically adjustable worktable height up to 100 mm - CO2 laser peak power 60 W - Maximum speed: 800 mm/s - Maximum engraving speed: 1200 mm/s - Repeat accuracy: ±0.01 mm - Minimum font size: 1 mm - Linear guides on X-axis and Y-axis - Material support: aluminum slats and included honeycomb table - Drive system X, Y: high-precision belt drive with stepper motors - Operating systems: from Windows 7 and above - Control via LCD display - Ruida controller RD6442 with 128 MB working memory - Interfaces: USB, WIFI, RJ45 - Red positioning laser to reduce setup times - Freely definable zero point on the work surface for flexible operation and easy positioning - Integrated autofocus for fast setting of working height - Power consumption: 2300W - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (AutoCAD, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty - Cutting depth depends on material (cutting capacity for acrylic approx. 15 mm) - Lens focal diameter 18 mm, F50.8, 38.1 - Mirror diameter 20 mm - Active water cooling for stable laser system operation and extended laser tube life - Integrated exhaust fan, power 500W - Integrated compressor, power 85 W - Including stand feet - Suitable for wood, ceramics, glass, and plastic - Dimensions: L=1200 mm, W=710 mm, H=413 mm Bledpfx Aisyk Ib Noyoh - Net weight: 120 kg

Kondisi: baru, Tahun pembuatan: 2026, Maximum saw blade width: 120 mm Weight: 350 kg Motor power: 1.3 kW WINTER AUTOMATIC BANDSAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB The PNK-AB has been specially developed for grinding the teeth of various bandsaw blades of different shapes, widths, and thicknesses. The compact and robust grinding unit, which moves along linear guides in the PNK-AB, ensures precise and stable grinding. Technical Data: - Bandsaw blade width: 15-120 mm - Tooth pitch: max. 60 mm, tooth depth: 0-30 mm - Tooth profiles: PV, NV, KV, PU, NU - Rake angle: -10° to +30° - Feed speed: 0-90 teeth/min - Number of motors: 2 - Grinding wheel motor: 1.1 kW, 1400 rpm - Gear motor: two speeds – 0.55 kW, 1400 rpm - Grinding wheel diameter Ø 250 mm - Grinding wheel bore Ø 20 mm - Grinding wheel thickness 8 mm/10 mm/13 mm (depending on tooth pitch) - Operating voltage 400 V, 3-phase, 50-60 Hz - Total power approx. 1.3 kW - Dimensions 80 × 120 × 175 cm - Net weight/gross weight 350/375 kg PNK-AB General Features: - Automatic grinding of bandsaw blades up to 120 mm wide. - Grinding wheel runs on linear guides. - Corrosion-resistant and hardened coating of all mechanical components. - On/Off switch. - Maximum tooth pitch 60 mm. - Easy operation. - Minimal space requirement. - Fast and precise grinding of NV, PV, and KV tooth forms. Bljdpeyk Ib Ajfx Aiyoh - Manual central lubrication. - Manual saw blade mounting and lift device. - Optional grinding attachments for circular saws (HSS) and bandsaws. - Manufactured according to CE standards. Capacity: Grinding up to 30 bandsaws per day. Optional Accessories: - CBN Woodmizer grinding wheel (net price €375) - Diamond grinding wheel for bimetal (net price €520) - Bakelite grinding wheel (13 mm, net price €75) - Ceramic grinding wheel (16 mm, net price €115) - CBN grinding wheel (net price €1,125) - Spare feeler finger (net price €70) - Feeler finger pin (net price €20) - Dressing device (net price €1,170) - Diamond dressing wheel (net price €100) - Grinding attachment for circular saws (HSS, net price €960) - Grinding attachment for frame saws (net price €2,700/1 metre) - Coil and uncoil system for bandsaw manufacturers (net price €5,800) - Sealed packaging (net price) €570 - Attachment for double-sided saws net price €1,560 - Pneumatic system for second feeler finger net price €1,140 - CAM for GD-tooth profile saw blades (WM) net price €330

Kondisi: baru, Tahun pembuatan: 2026, Cutting length 4200 mm Cutting height 2200 mm Motor power 3 kW WINTER AUTOMATIC VERTICAL PANEL SAW Type DPM AV 2242 Technical Data: - Control panel with software for panel cutting optimization. - Automatic cutting program – automatic positioning system - Automatic lifting system – scoring saw cutting - Maximum cutting height: 2200 mm - Maximum cutting length: 4200 mm Blsdpfx Aieyk Ibvoyjh - Maximum cutting thickness: 40 mm - Lower support rollers made of metal - Saw motor power: 3 kW - Voltage: 400/50 Hz three-phase - Servo motors: 4 sets of INOVANCE servo motors - Motor speed: 2880 rpm - Saw blade speed: 5280 rpm - Scoring saw blade speed: 7800 rpm - Main saw blade dimensions: 250x30x3.2 mm, Z=80, HM trapezoidal - Scoring saw blade dimensions: 125x20x3 mm, Z=24, HM conical - Overall dimensions (working area) (L x W x H): 8600 mm x 2000 mm x 3200 mm - Packing dimensions (L x W x H): 6000 mm x 2350 mm x 2600 mm - Total weight: 1350 kg The DPM AV 2242 is a fully automatic vertical panel saw that allows you to cut your panels automatically and with minimal effort using the integrated optimization feature. All panel cutting operations are performed automatically by the machine. Suitable for automatic cutting of sheets in vertical or horizontal directions, made of: - Chipboard - Coated chipboard - Multilayer panels - Solid wood - MDF - Plexiglass - Polycarbonate - Plastic materials Automatic Positioning System The machine automatically switches to vertical and horizontal positions via an automatic positioning system and cuts panels according to the optimization plan created by the machine’s optimization software. During the entire panel cutting process, the operator does not intervene. Using the automatic panel lifting system on the machine, the formatting process is completed while the panels remain in position. Automatic Cutting with Integrated Optimization The automatic cutting program included with the DPM AV enables the operator to enter values into the program and the dimensioning process is completed automatically. The optimization plan is part of the automatic cutting process and a standard feature. Users can optimize cuts for a single or multiple panels by entering part lists into the program. The workflow is optimized and performed automatically. Automatic Clamping and Lifting System The servo-driven automatic lifting system is a distinctive feature of the DPM AV. Thanks to the system, a single person can handle even the largest panels and cut them to the desired sizes according to the optimization without exertion or manual intervention. Precise cuts are performed without any friction or force, as the lifting system supports the panel’s weight. The servo-driven precision stop system achieves dimensional accuracy of up to 0.1 mm. The pneumatic clamping system supplied with the DPM AV is part of the lifting process. Panel Carriage System Precision-manufactured, high-quality, double-bearing support rollers assist the operator and ensure smooth panel movement on the machine. Panel Drive System Values and quantities entered into the program are...

Tahun pembuatan: 2026, Kondisi: baru, hobelmaschine_winter_duomax_400_hu Blsdpjyk Ibpsfx Aiysh

Tahun pembuatan: 2026, Kondisi: baru, Hobelbreite 610 mm WINTER DUOMAX 610 CE SPIRAL Maschinenbeschreibung Bodpfx Asyk Ibcoiyelh

Kondisi: baru, Tahun pembuatan: 2026, Working length: 1000-1600 mm Working width: 40-150 mm Thickness: 10-80 mm WINTER Discharge Table for a Four-Side Planer ALT-1 Automating material infeed and outfeed in planing machines significantly increases the work efficiency of machine crews and operators. Improving occupational safety is a crucial aspect of such an investment. Planing machines deliver high throughput rates, which are achieved through uniform and continuous material feeding. Manual feeding often cannot guarantee the required consistency and puts considerable strain on the operator. Moreover, interruptions during material infeed frequently lead to machine downtime, reduced productivity, and loss of quality. The offered automation systems are tailored to the individual needs and spatial requirements of the investor. Cross buffer systems for material infeed as well as longitudinal feeding devices with lower and upper drive rollers are available. We offer servo motors or hydraulic drives. Bledpfx Aijyk Iafsyoh For material outfeed, we provide sorting tables with ejectors or material pushers. Longitudinal sorting and buffering on cross beams are also possible. We also offer stacking of planed material, including advanced planing processing operations. The machine control is based on the best Mitsubishi components available on the market. Material dimensions: Length: 1000-6000 mm Width: 40-150 mm Thickness: 10-80 mm Capacity up to 80 m/min Robust chain feed Adjustable frequency inverter speed

Kondisi: baru, Tahun pembuatan: 2026, Cutting width 450 mm Operating voltage 400 V Weight 5500 kg WINTER multi-blade saw with 4 electronically adjustable saws MULTIMAX 175 M4 MULTIMAX 175 M4: Function: Optimization software for controlling the moveable saw units includes: Industrial computer with touchscreen - Input of cutting lists, display of optimization results, machine status, error messages Multifunctional hand device for quality marking and width measurement Laser for width measurement Each manual control unit operates a freely positionable saw spindle Software optimizes considering material yield, value, and productivity. All production data is stored, monitored, and analyzed. Additional features: Independent control panel (cable length 6 m) Mist lubrication system for the saw spindles FIX laser (manually adjustable) for indicating saw blade position Moveable lasers per saw spindle (synchronized with blade position) Lasers can already indicate the next cutting solution while the previous board is still being sawn Infeed system Automatic infeed "Easy Feed" with powered pressure rollers Continuously variable feed speed High-performance transport chain with hardened guide pins Hardened prism rails for precise guidance Technical parameters MULTIMAX 175 M4: Max. cutting width: 450 mm Min. cutting width: 45 mm Max. cutting height without pressure plate: 80 mm Max. cutting height with pressure plate: 60 mm Max. pass-through width: 800 mm Min. cutting length with pressure plate: 600 mm Total motor power: 37 kW Operating voltage: 400 V / 50 Hz Saw spindle diameter: 65 mm Spindle speed: 4200 rpm Saw blade Ø min./max.: 250 / 305 mm Saw blade bore: 80 mm 6 HW saw blades Ø300 × 3.1 / 2.2 × Z28 Positioning speed: max. 150 mm/s Positioning tolerance: ±0.1 mm Feed speed: 6-60 m/min Feed motor: 4.0 kW Chain width: 500 mm Pressure roller diameter: 110 mm Max. total outfeed width: 800 mm Temperature range: 0-40 °C Extraction hood Ø250 mm Air speed: 30 m/s Air volume: 5300 m³/h Working height: 850 mm Machine dimensions: 2732 × 2256 × 2003 mm Net weight: 5500 kg Colour: light grey RAL7035 / anthracite RAL7016 Cursor adjustment range: 5 m Configuration: Transport chain with spikes (every 2nd chain link) Penetration depth: 0.8 mm (standard) Advantages: Parallel feed, Stable hold for warped/wide/short boards Ideal for gluing joint cuts Chain brush at infeed for continuous cleaning Precision cutting via prism-guided transport chain Automatic chain lubrication (adjustable via MFD/touchscreen) Wear-resistant chain guide under the saw blades Additional equipment: Blodjyk H Unepfx Aiysh Driven outfeed roller below (ribbed) + upper pressure roller Pneumatic control for safe ejection of offcuts High-performance pressure system with 6 spring-mounted rollers Moving pressure plate synchronised with saw blade movement Secure hold-down along the entire cutting length Motorized height adjustment of the pressure system with display Pneumatic cushioning of all pressure cylinders Separate pressure control for each element Work and operational safety: 1 set of operating and instruction manuals CE safety standards Multiple anti-kickback devices Swivelling protective hood with locking and standstill monitoring Emergency stop at infeed, outfeed, and control panel Protective cover with viewing window...

Kondisi: baru, Tahun pembuatan: 2025, CUTMAX600.HU.001 Blodsyk H Uhspfx Aiysh

Kondisi: baru, Tahun pembuatan: 2026, de-hu-01 Bsdpfxeyk H Ubo Aiyjlh

Kondisi: baru, Tahun pembuatan: 2026, Feed motor 5.5 kW Total power requirement 58.3 kW Machine weight approx. 4000 kg Four-side planer and moulding line TIMBERMAX 420 SAW + 2 vertical spindles - Maximum planing width: 160 mm - Minimum processing width: 20 mm - Maximum cutting width: 200 mm - Maximum processing thickness: 120 mm - Minimum processing thickness: 15 mm - Minimum processing length (single feed): 650 mm - Minimum processing length (continuous feed): 480 mm - Maximum stroke of feed table: 6 mm - Maximum adjustment range of the guide plate: 6 mm - Saw spindle diameter: 50 mm - Saw spindle keyway: 10 mm × 2 - Saw spindle speed: 4000 rpm - Planing spindle diameter: 40 mm - Speed of lower planing spindle, left and right vertical spindles: 6800 rpm - Speed of upper planing spindle: 8000 rpm - Feed speed: 6-30 m/min - Feed roller diameter: 140 mm - Tool rotation diameter: Front lower cutter spindle (flat cutter): 125 mm Side cutter diameter × outer thickness: 152 mm × 12 mm Right and left vertical spindles: 115-170 mm Upper planing spindle: 105-150 mm Saw blade diameter (left and right): 180-300 mm - Total motor power: 58.3 kW Front lower spindle: 5.5 kW Right vertical spindle, left vertical spindle, upper planing spindle: 7.5 kW each Bljdpeyk H T Refx Aiyoh Saw spindle motors (left and right): 18.50 kW each Feed motor/rear auxiliary feed motors: 5.5 kW and 0.75 kW × 2 Crossbeam lifting motor: 0.75 kW - Air pressure: 0.3-0.6 MPa - Compressed air requirement: 0.15 m³/min - Planer diameter: 120 mm × 4 - Saw blade diameter: 150 mm × 2 - Extraction speed: 30-35 m/s - Extraction requirement: 150 m³/min - Dimensions (L × W × H): 4500 × 1530 × 1720 mm - Machine weight: 4000 kg

Kondisi: baru, Tahun pembuatan: 2026, winter-cleaner-10000ls Bsdpfxeyk H T De Aiyjlh

Kondisi: baru, Tahun pembuatan: 2026, WINTER-TA513B-400T-1 Bjdpfxsyk H Twj Aiyjlh

Kondisi: baru, Tahun pembuatan: 2026, WINTER-12500LS Bledpoyk H Tkjfx Aiyjh

Tahun pembuatan: 2026, Kondisi: baru, Working length: 1000–1600 mm Working width: 40–150 mm Thickness: 10–80 mm WINTER Infeed System for a Four-Sided Planer ZUF-1 Automating the material infeed and outfeed in planing machines significantly increases the work efficiency of the machine team and operators. Improved occupational safety is a crucial aspect of such an investment. Planing machines offer high throughput rates, which are achieved through consistent, continuous material infeed. Manual feeding often does not provide the necessary continuity and poses a considerable strain for the operator. Moreover, interruptions in material supply frequently lead to machine downtime, reduced productivity, and loss of quality. The offered automation systems are individually adapted to the requirements and spatial conditions of the customer. Cross accumulators for material supply as well as longitudinal feed devices with lower and upper drive rollers are available. We offer servo motors or hydraulic drives. Bljdpfeyk H Tdox Aiyeh For material outfeed, we offer sorting tables with ejectors or material pushers. Longitudinal sorting and buffering on cross beams are also possible. We also provide stacking of planed material, including advanced finishing processes. The machine control is based on the best Mitsubishi components on the market. Material dimensions - Length: 1000–6000 mm - Width: 40–150 mm - Thickness: 10–80 mm - Throughput: up to 80 m/min - Heavy-duty chain feed - Adjustable frequency inverter speed

Kondisi: bekas, Tahun pembuatan: 2022, Laser power in Watts: 130 / 150 Peak Working area: 1300x900 mm Dimensions (Length/Width/Height): 2200x1350x1150 mm Weight: 500 kg Used Laser Engraving and Cutting Machine WINTER LASERMAX MAXI 1390 - 150 W Laser Engraving and Cutting Machine - Year of manufacture: 2022 - Function-tested, excellent condition - Working area X, Y: 1300 x 900 mm - Electrically adjustable work table up to 200 mm - CO2 laser power: 150 W - Engraving speed: 0-1200 mm/s - Cutting speed: 0-600 mm/s - Repeat accuracy / resolution: ±0.01 mm / 1000 dpi - Minimum font size: 1 mm - Linear guides in X and Y axes - X, Y drive with high-precision toothed belt drive via stepper motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8 - Control via LCD display - USB interface with 128 MB memory - Red positioning laser for reduced setup times - Freely definable origin point on the work area for flexible operation and easy positioning - Power consumption max. 1000 W - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (Autocad, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Cutting depth depends on material (cutting capacity for acrylic approx. 20 mm) - Openings at the front and rear for passing through longer workpieces - Active water cooling CHILLER 5000 for stable laser system operation and long laser tube lifespan Bodoyk H S Tspfx Aiyelh - Rotary attachment for engraving cylindrical and round objects up to Ø 120 mm and 400 mm in length, 3-jaw chuck for workpieces up to max. diameter 50 mm - Suitable for wood, ceramics, glass, and plastics - Dimensions: L=1900, W=1350, H=1100 mm - Packaging dimensions: L=2200, W=1350, H=1150 mm - Weight: 500 kg

Kondisi: bekas, Tahun pembuatan: 2023, de-hu-001 Bjdeyk H S Hepfx Aiyolh

Kondisi: bekas, Tahun pembuatan: 2021, translation Bedpfxjyk H Sye Aiyolh

Kondisi: baru, Tahun pembuatan: 2025, 1 Blsdpfeyk H Stjx Aiyeh

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (Length/Width/Height) 4960x1900x1700 mm Total power requirement 0 kW Weight 6000 kg TIMBERMAX 6-23-TT-TS PREMIUM Four-Sided Planer WINTER TIMBERMAX 6-23-TT-TS PREMIUM - Max. planing width (tool rotation diameter Ø140) 230 mm Blodpfx Aev Ucireiyoh - Min. planing width (tool rotation diameter Ø140) 20 mm - Max. planing height (tool rotation diameter Ø140) 160 mm - Min. planing height (tool rotation diameter Ø140) 10 mm - Min. workpiece length 650 mm - Max. stroke range of the feed table 5 mm - Max. adjustment range of the infeed fence 10 mm - Number of spindles: 6 - Spindle diameter Ø40 mm - Spindle speed 6000 rpm - Feed speed 6-36 m/min - Tool diameter first bottom spindle (rebating cutter Ø165 mm, planer head Ø140 mm) Ø125-Ø160 mm - Left and right spindle, top spindle, second bottom spindle Ø112-Ø200 mm Spindle arrangement - 1st bottom spindle 5.5 kW - 2nd right spindle 5.5 kW - 3rd left spindle 7.5 kW - 4th top spindle 7.5 kW - 5th second bottom spindle 5.5 kW - 6th second top spindle 5.5 kW - Width adjustment left spindle motor 0.75 kW - Feed motor 5.5 kW - Motor for vertical carriage adjustment 0.75 kW - Extraction outlets 6 x Ø 125 mm - Feed roller diameter Ø140×Ø35×50 mm - Adjustment range vertical spindle: 40 mm - Adjustment range horizontal spindle: 20 mm - Dimensions L=4960, W=1900, H=1700 mm - Weight 6000 kg INCLUDING: - with touch screen control - machine base made of cast iron - top shaft electrically adjustable with feed system - left shaft electrically adjustable - hard-chromed tables - CE standard, TÜV Rheinland - pneumatic side pressure before left shaft - lubricant pump - lubrication pump with central lubrication - pneumatic pressure of feed rollers - feed system with cardan shaft drive - 3 powered feed rollers in the table

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 6400 x 1500 x 1780 mm Total power requirement: 19 kW Weight: 1800 kg Optimizing Cross-Cut Saw WINTER QUICK 100 NC - Min. workpiece length: 300 mm - Min. / max. workpiece width: 20–220 mm - Min. / max. workpiece thickness: 15–100 mm - Workpiece thickness tolerance: ±3 mm - Max. tolerance per side of workpiece: 10 mm/m - Wood type: softwood or hardwood - Min. cutting length: 80 mm - Max. feed speed: 180 m/min - Cutting cycle time: 0.15–0.3 s - Total power: 19.0 kW - Saw motor: 7.5 kW - Feed servomotor: 5.5 kW - Saw stroke servomotor: 4.5 kW - Conveyor belt motor: 0.75 kW - Beam lifting motor: 0.37 kW - Extraction diameter: 2 × Ø120 mm Bsdpfxowt Ua Ej Aiyjlh - Table height: 900 mm - Overall dimensions (L=6400, W=1500, H=1780 mm) - Weight: 1800 kg Standard configuration: - Infeed and marking station with servo drive - Infeed belt and saw stroke with separate servo motor drives - 2.5 m outfeed belt with fluorescence sensor and ejection system - Saw blade with integrated waste extraction system - User-friendly 10.1-inch TFT touchscreen - Air tank for consistent pressure force - High-performance servomotor - Fully enclosed safety cover for quiet and safe operation - Efficient production - Can replace 4–8 sets of traditional manual cross-cut saws - Saves labor and space - Safe operation - Can be combined with a high-speed four-sided planer for an efficient, automatic production line.

Kondisi: baru, Tahun pembuatan: 2025, Four-Side Planer WINTER TIMBERMAX 6-23-TT PREMIUM Dimensions (LxWxH): 4960 x 1900 x 1700 mm Total Power Requirement: 0 kW Weight: 6000 kg - Max. planing width (tool rotation diameter f140): 230 mm - Min. planing width (tool rotation diameter f140): 20 mm - Max. planing height (tool rotation diameter f140): 160 mm - Min. planing height (tool rotation diameter f140): 10 mm - Min. workpiece length: 650 mm - Max. infeed table adjustment range: 5 mm - Max. infeed fence adjustment range: 10 mm - Number of spindles: 6 - Spindle diameter: F40 mm - Spindle speed: 6000 rpm - Feed speed: 6–36 m/min - Tool diameter first bottom spindle (rebate cutter f165 mm, planer head f140 mm): F125–F160 mm - Left, right, top, second bottom spindle: F112–F200 mm Spindle Sequence: - 1st bottom spindle: 5.5 kW - 2nd right spindle: 5.5 kW - 3rd left spindle: 7.5 kW - 4th top spindle: 7.5 kW - 5th second bottom spindle: 5.5 kW - 6th second top spindle: 5.5 kW Bjdev Uchnopfx Aiyelh - Width adjustment left spindle motor: 0.75 kW - Feed motor: 5.5 kW - Height adjustment motor for carrier lift: 0.75 kW - Extraction ports: 6 x F125 mm - Feed roller diameter: F140×F35×50 mm - Vertical spindle adjustment range: 40 mm - Horizontal spindle adjustment range: 20 mm - Dimensions: L=4960, W=1900, H=1700 mm - Weight: 6000 kg INCLUDES: - Machine frame made of grey cast iron - Electrically adjustable top shaft with feed system - Electrically adjustable left shaft - Hard-chrome plated tables - CE Standard, TÜV Rheinland - Pneumatic side pressure before the left shaft - Glide lubricant pump - Centralized lubrication with lubricant pump - Pneumatic feed roller pressure - Feed system with cardan shaft drive - 3 powered table rollers

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 3300x2100x2100 mm Weight: 1500 kg Total Power Requirement: 17.5 kW CNC Machining Center ROUTERMAX 1325 SIM 4SP - Working area X-axis: 1300 mm Bljdpfx Ajv A Ha Dsiyjh - Working area Y-axis: 2500 mm - Working area Z-axis: 180 mm - 4 x 2.2 kW water-cooled milling spindles, ER 25, with CHILLER CW 3000 cooling unit - All 4 spindles operate simultaneously (SIMULTANEOUS) - 4 x chip extraction hoods - Spindle speed: 6,000 - 24,000 rpm - X & Y-axis drive system: rack and pinion - Z-axis drive system: ball screw - Drive motors: stepper motors - Max. traversing speed: 20 m/min - Max. working speed: 12 m/min - Working precision: 0.05 mm - Vacuum grid table with 4 zones and T-slots - 5.5 kW dry-running, air-cooled vacuum pump - Tool length sensor - Controller: DSP type NK 105 - Interface: USB - CAD/CAM software: Vectric Cut2D PRO (Nesting included) - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0–45°C - Dimensions (Width): 2100 mm - Dimensions (Length): 3300 mm - Weight: 1500 kg