Beli Woodcracker C 350 bekas (21.326)

Kondisi: sangat baik (bekas), Vötsch Model: VT³ 4100 Water-cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Features of this controller: - Color touchscreen with intuitive menu (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramp and dwell times - Data logging & documentation (e.g., temperature cycle, alarms) - USB port for data export (CSV, optionally S!MPATI-compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Data (Temperature Test Chamber) - Test chamber volume: 990 liters Prodpfx Abowyu H Eo Ied - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Rate of temperature change (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min - Maximum heat compensation power: 4500 W - Calibration points: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The chamber is equipped with feedthroughs on both the right and left sides. These allow for inserting measurement cables and test fixtures into the test space. - 1 x L1 DN 50 mm - 1 x R1 DN 125 mm - 3 x R1 DN 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Sound level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg For your confidence as a buyer, the following work is performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful verification, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Stäubli Robot RX 60B LCR with Control Unit and Teach Pendant We are offering a Stäubli Robot RX 60B with control unit for sale. Robot: Stäubli Robot RX 60B LCR Predpfxjft Sc Is Ab Isd Payload capacity (Charge nominale-Kg): 2.5 kg Weight: 46 kg Type: RX60B LCR / F04/50R7E1/A/01 Control Unit: Stäubli CS8 RX60B LCR 3X400V-50/60 Hz-3000VA Weight: 170 kg Type: CS8 RX60BLCR / F06/546XA1/C/01 Teach Pendant: Stäubli SP1 Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) If you have any further questions, we would be happy to answer them by phone.

Kondisi: sangat baik (bekas), Here we offer a Weiss climate test chamber. Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Temperature Testing Volume: 335 liters Test Chamber Dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: –42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temperature deviation over time: ± 0.1 to ± 0.5 K Psdpfjq U Sdcox Ab Ijrd Temperature uniformity (spatial): ± 0.5 to ± 1.5 K Climate Testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity (spatial): ± 0.5 to ± 1 K Humidity deviation over time: ± 1 to ± 3 % RH Voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 4.1 kW Nominal current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight: approx. 515 kg For your safety as a buyer, please note the following information! The following work will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run will be performed on the chambers. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), We offer a temperature shock test chamber here, with a 100-liter usable capacity suitable for larger test specimens up to 30 kg. Compliant with all common international standards. Predpen Smtmofx Ab Ied - Water-cooled - Temperature range (hot chamber): +60 °C to +200 °C - Temperature range (cold chamber): -70 °C to 0 °C - Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) - External dimensions: 1100 x 1885 x 1965 mm (W x H x D) - Water-cooled refrigeration unit - Program control via touch panel - Automatic defrost - Overtemperature protection - Operating hours counter - Mobile design - Includes 2 stainless steel specimen baskets - Cable port Ø 100 mm - Refrigerants: 3 kg R404A, 1 kg R23 - Power supply: 400V 3Ph 50Hz - Max. current consumption: 32A - Type: TSD-100 - Condition: used - Scope of delivery: (see picture) (Subject to technical modifications and errors. Stated data is non-binding!) If you have further questions, we will be happy to answer them for you by phone.

Kondisi: sangat baik (bekas), Here we offer a Heraeus drying oven with convection and heating functions. Heraeus Drying and Forced Convection Oven Temperature range up to 300 °C Manufacturer / Model: Heraeus UT 6060 Features: - Temperature range: up to 300°C - Net volume: 52 liters Predpfx Abjd Hpv Aj Isd - Weight (empty): 53 kg - Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm - External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm - Nominal voltage: 230V, Nominal frequency: 50/60 Hz, Nominal current: 6.8A, Nominal power: 1.50 kW - Includes 2 shelves - Type: UT 66060 - Condition: used - Scope of delivery: (see pictures) (Subject to alterations and errors in technical data. All information is provided without guarantee!) If you have further questions, we will be happy to assist you by phone.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, Zwick / Roell Type: EC76G 1-1-2-0 361763 Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for testing in the temperature range from -80°C to +250°C Reliable test results and perfect integration of the temperature chamber into the testing system. Temperature chamber dimensions: Width 600 mm x Height 1000 mm Temperature chamber suitable for AllroundLine Cooling via LN2 (liquid nitrogen) (-80°C connection to external supply, not included) Power supply: 400/230 V 16A 3N~ 50/60Hz Power: 4,500 W Weight: 180 kg Condition: unused Scope of delivery: (see picture) (Specifications and data are subject to change and errors!) For further questions, we will be happy to assist you by phone. Predpfx Abelguwwj Isd

Kondisi: sangat baik (bekas), CTS Model: C-40/60 CTS Compact Climate Chamber, Air-Cooled Test Volume: 60 liters Temperature Range: -40 °C to +180 °C Humidity Range: 10% to 98% relative humidity +10 °C to +90 °C in temperature mode +5 °C to +89.5 °C dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal Voltage: 230V 1/N 50 Hz Power: 3.3 kW Rated Current: 13 A Buyer Information for Your Safety! The following steps are performed on the climate chambers we offer prior to sale: 1. Functional check and replacement of necessary components Predpfeu Hlb Esx Ab Isd 2. If required, replacement with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data!) If you have any further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Type: T-70/600/S Water-Cooled Temperature Test Chamber Control System: Psdpfxou U Ixms Ab Ierd - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test specimen control Technical Specifications Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Thermal Radiation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without irradiation and without additional equipment. Dimensions: Test volume: 600 litres Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerants: R404A / R23 Weight: 600 kg Safety Information for Buyers! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to alterations and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate, cooling: 5.0 K/min Temperature change rate, heating: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test chamber volume: 335 liters Nominal voltage: 3/N/PE AC, 400V ±10 %, 50Hz Nominal power: 10 kW Nominal current: 21 A Noise level at 1m distance (free-field measurement): < 69 dB(A) Side port: 5.5 cm / 12.5 cm The chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 Pjdpjir D U Dsfx Ab Ierd For your safety as the buyer, please note the following information! The following points are carried out in advance on the chambers we offer: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored using calibrated equipment. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and errors excepted!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Weiss Model: WK 27'/50-150 Climate Test Chamber Water-cooled Technical Specifications: Test chamber designation: WK 27'/50-150 External dimensions: Height 3500 mm, Width 3400 mm, Depth 6000 mm Control cabinet dimensions: Height 2000 mm, Width 2400 mm, Depth 400 mm Internal dimensions: Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m² (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating operation: -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature constancy: ± 0.3 to 1.0 K (temporal) Temperature constancy: ± 0.1 to 0.5 K (temporal) Climate operation: 10 to 90°C Humidity: 10...98 % RH Temperature constancy: ± 0.1 to 0.5 K (temporal) Dew point range: +4 to +84 °C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Includes extra floor plates to increase floor load capacity For your security as a buyer, please note the following information: The following steps are carried out on all chambers we offer before sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful checks, the chambers are subjected to a test run monitored with calibrated equipment. Podevx Nfbjpfx Ab Ierd Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Weiss Type: WK3-600/70 Climatic Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 4.0 K/min Cooling 2.5 K/min Temperature deviation: Over time: ±0.1 to ±0.5 K Spatial: ±0.5 to ±1.5 K Heat compensation max. 2500 W Data for Climate Testing: Temperature range: +10°C to +95°C Dew point temperature range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ±0.1 to ±0.3 K Pjdew Nqhpopfx Ab Isrd Spatial temperature deviation: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3% RH Temperature uniformity: Spatial: ±0.5 to ±1.0 K Heat compensation max. 500 W Test chamber volume: 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1998 mm, Width 1000 mm, Depth 1745 mm Port diameter: NW 125 mm and NW 50 mm Operational Data: Rated voltage: 3/N/PE AC 400V 10% 50Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 452A & R23 Weight: 680 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (See photo) (Changes and errors in the technical data and specifications are reserved!) If you have further questions, we are happy to answer them by phone.

Kondisi: bekas, Weiss Model: WK1/1500/40 Weiss Climate Test Chamber Air-Cooled with Humidity Control (converted to refrigerant R-452a) Temperature range: -40°C to +180°C Cooling rate: approx. 2.5 K/min, Heating rate: approx. 3.5 K/min Temporal temperature deviation at workspace center: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Prsdpfx Abow Hcttj Ijd Humidity control range: +10°C to +95°C / 10% to 98% RH Temporal temperature deviation at workspace center: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1.0 K Heat compensation: In the range of +25°C to +95°C at up to 90% relative humidity: 500 W Test chamber internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 1475 mm External dimensions: Height: 2005 mm, Width: 1300 mm, Depth: 2450 mm Test chamber volume: approx. 1540 liters Chamber lighting: Halogen lamp 12V, 50W Rated voltage: 3/NPEAC 400V ±10% 50Hz Rated power: 11.5 kW, Rated current: 22.0 A Required circuit breaker: 32A slow-blow Control cabinet and operator panel protection class: IP 54 Refrigerant: R-452a Weight: 920 kg Important information for your safety as the buyer: The following procedures are carried out on all chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. New charge of legally-compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors excepted.) If you have further questions, we are happy to answer them by phone.

Kondisi: baik (bekas), Vötsch Model: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal temperature deviation at the center of the test space: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Rate of temperature change: Heating: 16 K/min Cooling: 14.5 K/min Specifications for Climatic Testing: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at the center of the test space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation at the center of the test space: ± 1 to ± 3% RH Heat compensation: max. 8000W Housing Dimensions: External dimensions with hinges and door lock: Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Podpfxewvgwbo Ab Isrd Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides, allowing measurement cables and test devices to be routed into the test space. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Test Chamber Illumination: Halogen bulb 24 V, 50 W 3/N/PE AC 400V ±10% 50Hz Nominal power: 44.0 kW Nominal current: 63.0 A Customer-side fuse: 100 A (slow-blow) Max. heat output to the environment: 2.2 kW Permissible test specimen weight: Total load on grid shelves: 100 kg Test chamber floor: 150 kg, insert shelf: 50 kg Refrigerant: R 404A/R 23 Weight: 1900 kg Your safety as a buyer – please note the following: The following procedures are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant (if required) 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors in the specifications!) For further questions, please contact us by phone.

Kondisi: sangat baik (bekas), Espec Model: TSA-202E-W Water-cooled Temperature Shock Chamber Cold chamber: -55°C to 0°C Hot chamber: +50°C to 200°C System: Two-zone test via flap switching Temperature fluctuation: ±0.5°C Hot chamber: Heating time: ambient temperature (20°C) to +200°C within 15 minutes. Cold chamber: Cooling time: ambient temperature (20°C) to -55°C within 35 minutes. Temperature recovery: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz, 65 A Refrigerants: R404A 5 kg, R23 2.0 kg Weight: approx. 1200 kg Information for your security as a buyer! The following points are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant if necessary 3. Leak test with certificate Pedswc R A Iepfx Ab Iord 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), espec-ty-gnx28-6cwl-espec-climate-test-chamber-watercooled-clima te-test-chamber-n-series-temperature-range--70-to-180c-temperatur e-change-rate-heating-10-kmin-cooling-5.5-kmin-humidity-range-10- to-95-rh-as-per-chart-internal-dimensions-w-x-h-x-d-in-mm-1000-x- 1000-x-800-external-dimensions-w-x-h-x-d-in-mm-1205-x-1930-x-1960 -useable-volume-800-liters-cooling-capacity-3.6-kw-at--50c-heatin g-system-10-kw-refrigerants-r-404a--r-508a-power-supply-ac-400v-3 -phase-50-60hz-38a-weight-approx.-695-kg-security-information-for -buyers-the-following-steps-are-performed-on-all-our-chambers-pri or-to-sale-1-functional-check-and-replacement-of-necessary-compon ents-2-if-required-refill-with-legally-compliant-refrigerant-3-le ak-test-with-certificate-4-following-successful-inspection-the-ch ambers-undergo-a-documented-test-run-condition-used-scope-of-deli very-see-picture-specifications-subject-to-change-or-error-should -you-have-any-further-questions-we-will-be-happy-to-answer-them-b y-phone. Prodpfxjv Duuxj Ab Isd

Kondisi: baik (bekas), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test specimen control Technical Specifications Temperature Tests: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2,500 W at +20°C Approx. 2,500 W at 0°C Approx. 1,800 W at -40°C Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Pjdpfx Absvitmdo Iord Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1,900 mm, Width approx. 1,120 mm, Depth approx. 1,875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, please note the following information! The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For additional questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Heraeus Model: VT 6025 Heraeus Vacutherm Vacuum Drying Oven Specification: Jacket Heating VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Heating type: Jacket heater without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data!) For further questions, feel free to contact us by phone. Prodpfx Ajrknagjb Iod

Kondisi: sangat baik (bekas), Heraeus Model: VT 6025 Pedpfx Aorm Riheb Isrd Heraeus Vacutherm Vacuum Drying Oven Specification: Jacket Heating VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Heating type: Jacket heater without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Here we offer a Weiss temperature chamber. Weiss temperature test chamber with S!MCON / 32 control, water-cooled (Refrigerant converted to R-452A) Control unit: "Touch panel" All control and operation commands can be triggered easily by touching the function symbols on the touch panel. Levelling Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with cable ports on both the right and left sides. Measurement lines and test equipment can be routed into the test chamber through these ports. Cable ports included as standard: R1: nominal width 125 mm L1: nominal width 50 mm Test chamber volume: approx. 335 litres Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Technical data for temperature testing: - Temperature range: -42 to +180 °C - Temperature deviation over time (center of usable space): ± 0.1 to ± 0.5 K - Temperature deviation spatially: ± 0.5 to ± 1.5 K - Temperature change rate: Heating: 3.2 K/min Cooling: 4.0 K/min - Maximum heat compensation: 2300 W Technical data for operation: - Test chamber lighting: Halogen bulb 2x24V, 50W - Nominal voltage: 3/N / PE AC 400 V ±10% 50 Hz - Rated current: 14 A - Rated power: 4.1 kW - Fuse (to be provided by customer): 16 A (slow-blow) - Sound pressure level: measured at 1m in front, at 1m height: 56 dB(A) - Refrigerant: R-452A - Weight: 515 kg - Type: WT3-340/40 For your safety as a buyer, the following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components Psdpfxorbigfs Ab Ijrd 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Here we offer you a Heraeus Vötsch temperature test chest. Vötsch Temperature Test Chest / Test Chamber VLM 3068/S, air-cooled (top-loading material testing chambers) Control Panel: The control panel is mounted on a console on the temperature test chest. All control and operation commands can be triggered by simply touching the function symbols. The operating manual for the control panel is included. Main Switch: The main switch is located at the front of the temperature test chest. Air Handling Compartment: The air handling compartment is located inside the test chamber and contains the modules required for temperature regulation. In this compartment, the air is conditioned (cooled/heated) and circulated by the test chamber fan. Air is drawn in at the center of the side wall and, through the air baffles, re-enters the test chamber along the longitudinal sides. Feedthroughs: The temperature test chest can optionally be equipped with feedthroughs, allowing cables and testing devices to be routed into the test chamber. Feedthroughs: front 2 x 82 mm ∅, rear 1 x 85 mm ∅ Internal dimensions: Width 2,000 mm, Depth 570 mm, Height 600 mm External dimensions: Width 3,000 mm, Depth 870 mm, Height 1,060 mm Psdpfx Aerbiyfeb Ierd Technical data: Mechanical load capacity: Max. load with test material (evenly distributed across chamber floor): 600 kg Point load: 50 kg Data for temperature tests: Temperature range: -30 °C to +125 °C Temperature deviation over time at chamber center: ±1 K Rate of temperature change: Heating approx. 1 K/min Cooling approx. 2 K/min Operating data: Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 3 kW, Rated current: 9 A Customer-side fuse: 16A slow-blow Temperature test chest VLM 3068/S Test chamber volume: approx. 680 l Weight: approx. 700 kg Refrigerant: R-404A Noise measurement: Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of delivery: (see picture) ( Changes and errors in technical data 및 information reserved!) If you have further questions, we will be happy to answer them for you by phone.

Kondisi: sangat baik (bekas), Vötsch Prsdpfx Abju Au Ere Ijd Model: VC 7330/S Climate Chamber, Water-Cooled Internal Volume: 3300 liters Specifications for Temperature Testing: Temperature Range: -70°C to +180°C Spatial Temperature Deviation: ±1 to ±2 K (corresponds to temperature gradient) (2 to 4) Temporal Temperature Fluctuation at Chamber Center: ±0.5 - 1 K Rate of Temperature Change (according to IEC 60068-3-5): Heating: 1.5 K/min Cooling: 1.5 K/min Specifications for Climatic Testing: Temperature Range: +10°C to +90°C Humidity Range: 10% r.h. to 98% r.h. Temporal Temperature Fluctuation: ±0.2 to -0.5 K Temporal Humidity Fluctuation: ±1% r.h. to ±3% r.h. Dew Point Range: +5°C to +89°C Mechanical Load Data: Test Chamber Floor Load Capacity: 150 kg Max. Chamber Floor Load: 250 kg Test Chamber Dimensions: Width 2000 mm x Depth 1150 mm x Height 1510 mm External Dimensions: Width 4000 mm x Depth 1450 mm x Height 2100 mm Operating Data: Test Chamber Illumination: Halogen bulb 12 V, 20 W Rated Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 15 kW Rated Current: 34 A External control via RS 232 interface possible. Refrigerants: R404A / R23 Weight: 1550 kg For your security as a buyer, please note the following information! The following procedures are always performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), CTS Climate Test Chamber T-70/600 Water Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for setpoint and actual temperature values - Easy adjustment via +/- buttons - Digital temperature input in °C - PLC-compatible - Up to 100 test programs possible Pjdpfx Abjvaxq No Ijrd - RS 232 interface - 2 free switching channels for customer-side test specimen activation Insert Shelf: Stainless steel, support surface 820 x 710 mm Max. load per shelf: 35 kg Total load with maximum shelving: 100 kg Refrigeration Unit: Water-cooled, low-noise, fully hermetic with continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Tests: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K (time-based) Temperature change rate: According to DIN 50 011, Part 12, measured in the center of the test chamber - Heating: 2.5 K/min - Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume: 600 liters Internal chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" internal thread Sound pressure level:

Kondisi: sangat baik (bekas), CTS Type: C-40/1000 CTS Climate Test Chamber Condenser: air-cooled refrigeration unit Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-side test object control Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate: Heating rate: 2.0 K/min Cooling rate: 2.5 K/min Temperature deviation: ±0.1 to ±0.3 K over time Heat Radiation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1500 W at -20°C Climatic Test Area: Temperature range: +10°C to +95°C Humidity range: 10 to 98% rH Dew point range I: +7 to +94°C Dew point range II: -10 to +7°C Temperature deviation: ±0.1 to ±0.3 K over time Humidity stability I, over time: ±0.5 to ±1.5% rH Humidity stability II, over time: ±1 to ±3% rH Panoramic window: 570 x 710 mm Test chamber dimensions: width 1000 mm, depth 1100 mm, height 900 mm External dimensions: width 1270 mm, depth 2220 mm, height 1950 mm Test chamber volume: 1000 liters Cable ports: ø 50 mm Prjdpjru Dzujfx Ab Iod Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW, Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg For your security as a buyer, the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, specifications are reserved!) If you have any further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VT³ 4150 Vötsch Temperature Test Chamber, Air-Cooled Temperature Testing Temperature Range: -40°C to +180°C Temperature Change Rate: Cooling approx. 2.5 K/min Temperature Change Rate: Heating approx. 3.5 K/min Exhibition Unit External Dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test Chamber Dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Rated Voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Power: 11.5 kW Rated Current: 22.0 A Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A Pedpfx Aow Ehutjb Iord For your safety as a buyer, please note the following information! The following procedures are performed on our chambers prior to delivery: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further enquiries, please contact us by phone.

Kondisi: sangat baik (bekas), en-GB Pedpfx Abswwg Uvj Isrd