Beli Zett Berantakan Teknologi Gmbh bekas (85.376)

Tahun pembuatan: 1983, Kondisi: bekas, Yeast propagation system with steamable wort sterilization tank rated for 2 bar operating pressure and a capacity of 2.47 hl, a second heated and cooled wort sterilization tank rated for an operating pressure of 2 bar with a capacity of 12.7 hl, as well as a yeast propagation tank with a capacity of 55 hl, permitted operating pressure of 2 bar, and jacket cooling in the lower third (without cone). All tanks are equipped with agitators. Also included is a CIP tank. The system is controlled via a Steinecker control cabinet (timer controlled). Tanks can also be purchased individually. Machine (additional): with control cabinet and CIP tank Godpfevcqt Usx Aaboua Equipment: 2 wort sterilization tanks each with agitator (approx. 2.4 hl and approx. 12.7 hl), control cabinet, CIP unit, conical pressure tank with agitator.

Kondisi: bekas, Machine (Additional Information): Majority built in 2003 Wort Yield: 150 hl Grain Bill: 2500 kg Guedpjvcqrwofx Aabja Power: Three-phase current Voltage: 400 V Frequency: 50 Hz Equipment: Lauter tun, NDK whirlpool wort kettle system with external boiler, additional whirlpool, trub collection system, hop dosing unit Peripheral Equipment: Wort heater for lauter runoff, kettle vapour condenser

Tahun pembuatan: 1988, Kondisi: bekas, Machine (additional information): Stainless steel tanks with temperature control Total capacity (gross): 904 hl Material: Stainless steel Gedpfx Ajvcqg Ieabsua Equipment: 3 fermentation tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl), dedicated temperature control system (Nerb)

Tahun pembuatan: 1995, Kondisi: bekas, Flotation tank. - Ammonia-cooled, 1 x shell cooling. - Stainless steel - Insulated and panelled - Short standing shell base - Cleaning air fitting with safety valve Gusdpfjvcqdyex Aabea Additional machine information: Outdoor tank for storage of liquids Capacity: 74,400 liters Operating pressure: 0.9 bar Width: 3.27 m Height: 12.55 m Material: Stainless steel Orientation / Position: vertical Base design: short standing shell base Equipment: Cooling: 1 x shell cooling; insulation; cleaning air fitting with safety valve; temperature measurement

Tahun pembuatan: 1985, Kondisi: bekas, Pressure tank cellar with 4 upright 324 hl stainless steel pressure tanks and double-seat valve solution at the operator level. The tanks are cooled with ice water. Machine (add-on): 4 pressure tanks Diameter per tank: 2550 mm Total height per tank: 7360 mm Cooling surface per tank: 25 m² Permissible operating overpressure: 3 bar Tank capacity: 324 hl Length: 12 m Width: 4 m Height: 7.5 m Material: Stainless steel 1.4301 Gsdpfsvcqynjx Aabeua Features: Tank cleaning device with spray head, safety valve, manometer, cleaning air valve combination, sample tap, level indicator with flaps, outlet valve, pressure tank logbooks and drawings available Peripheral equipment: Supply and discharge pipelines via double-seat valves Weight: 2585 kg

Tahun pembuatan: 1979, Kondisi: bekas, Machine (Additional): Wort Cooler Capacity: 150 hl/h Gsdevcqtzopfx Aaboua Pressure: 6 bar Max. Temperature: 100 °C Length: 2,550 mm Width: 900 mm Height: 2,000 mm Material: Stainless steel Base construction: Mounted on frame Features: 2-stage, connection diameters: DN65 (wort, water) and DN80 (chilled water) Peripheral equipment: Wort aeration, mixing pump, booster pump (water) Weight: 1,080 kg

Tahun pembuatan: 1988, Kondisi: bekas, Cylindroconical 965 hl fermentation and storage tank – with cooling, 1 x cone cooling jacket, 3 x shell cooling jackets. – Swiveling cone – Stainless steel – insulated – short standing base ring – Cleaning air fitting with safety valve – Vacuum valve. 12 tanks available, can be sold individually or in partial quantities. Gusdpfx Ajvcqnloabja Machine (Additional): Outdoor tanks for liquid storage; Years of manufacture: 1988-1991 Capacity: 96,450 l Operating pressure: 2 bar Length: approx. 12,400 mm Width: approx. 3,950 mm Height: approx. 3,950 mm Material: Stainless steel 1.4301 Orientation / Position: Vertical Base construction: Short standing base ring Equipment: 12 tanks; Cooling: 1 x cone cooling, 3 x shell cooling; Swiveling cone; Insulation; Cleaning air valve with safety valve; Vacuum valve; Temperature measurement Weight: 6,220 kg.

Tahun pembuatan: 1979, Kondisi: bekas, Centrifugal High-Performance Kieselguhr Filter with Buffer Tank, KG-Dosing Vessel, and Peristaltic Pump. Machine (Additional): Kieselguhr Filter Capacity approx.: 110 hl/h Tank Volume: 1,550 l Operating Pressure: 9 bar Operating Temperature: 100°C Operation / Control: Control cabinet with push buttons Gujdpfxjvcqmbo Aaboa Material: Stainless steel Equipment: Kieselguhr dosing vessel, 14.26 hl; peristaltic pump Peripherals: Buffer tank, vessel.

Tahun pembuatan: 1975, Kondisi: bekas, Horizontal pressure filter system with filter elements arranged one above the other. At the end of the filtration process, the diatomaceous earth is discharged centrifugally. Machine (additional info): Horizontal sieve filter Capacity: 140 hl/h Vessel volume: 26 hl Length: approx. 4000 mm Width: approx. 2000 mm Height: approx. 3500 mm Guodpjvcqpcefx Aabea Material: Stainless steel 1.4541 (vessel) Base frame: Mounted on feet Equipment: Diatomaceous earth dosing vessel with dosing pumps; pumps; fittings; instrumentation

Tahun pembuatan: 1979, Kondisi: bekas, Diatomaceous Earth and Sheet Filter. Sterilizable universal filter for liquid filtration using diatomaceous earth and germicidal filter sheets. Stationary sheet filter with square filter elements arranged in vertical rows, featuring hydraulic filter sheet compression. Hydraulic system operated via integrated electric control panel. Guodpfx Aevcqn Soaboa Machine (additional): Diatomaceous earth and sheet filter in combination design; year of manufacture: 1979-2010 Capacity approx.: 380 hl/h, combination filter – filtration area approx. 76–108 m² (DE); 18 m² filter sheet when filtering beer Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10,100 mm Width: 1,320 mm Height: 1,750 mm Formats: Square filter elements Arrangement: Vertical row layout of filter elements Operation/control: Integrated electric control panel Material: Stainless steel Orientation/position: Horizontal Base frame: Frame construction Equipment: Filter plates; filter frames; bypass chamber; drip tray with discharge auger; hydraulic filter sheet compression; hose pump.

Tahun pembuatan: 2001, Kondisi: bekas, The Pall CFS system is designed as a standalone unit and can be installed directly upstream of the filling line without the need for a buffer tank. It is a fully independent process module comprising the following components: filter vessel, piping and connections, membrane cleaning system (CIP), integrity testing module, and control panel. Its hygienic design, simple integrity testing, and full automation ensure the microbiological safety of the system and allow operation typically by the filling line staff. In cluster filtration, filter elements are arranged in groups called clusters. Each cluster is equipped with its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization, and integrity testing are performed per cluster. Advantages of the CFS principle: - Extended service life - On-site integrity testing - Cluster-specific integrity diagnostics - Specialized flushing - High specific flow rates - Short flushing cycles - Consistent flow through all filter cartridges - Minimal water consumption - Rapid filter element replacement - Controlled backwash cycles - Minimal beer loss - High biological safety - Constant availability Only pre-clarified products with normally filterable characteristics are permitted for filtration with this system. Machine (additional details): CFS-System Flow rate: 400 hl/h continuous Operating pressure: 6 bar Operating temperature: 105 °C Capacity: 1456 l Power: 10 A Voltage: 220 V Water requirements: Cold water: min. 150 hl/h; Hot water (max. 65 °C): min. 150 hl/h Gusdpfxsvcqx De Aabsa Compressed air: Process air: 4–6 bar; Control air: 5–8 bar Dimensions (LxWxH): 1.40 m x 1.20 m x 1.85 m Base frame: Main frame with control and measuring components, filter vessel, cleaning module Equipment: 98 filter cartridges, 3 piston diaphragm pumps (dosing), centrifugal pump with frequency converter (WT-circuit), various analog and digital sensors (flow, pressure, level, temperature, conductivity), various valves, control cabinet Weight: 3,450 kg

Tahun pembuatan: 1975, Kondisi: bekas, en-GB_Stationary sheet filter with square filter elements arranged in a vertical row. Gusdpfsvcqzlox Aabja Machine (additional information): Sterilising filter Capacity: 140 hl/h Number of plates: 119 plates Length: 7,500 mm Width: 1,600 mm Height: 2,000 mm Format: Square filter elements – 100 cm x 100 cm Layer arrangement: Filter elements arranged vertically in a row.

Tahun pembuatan: 1995, Kondisi: bekas, With this filtration system, only pre-clarified products with properties suitable for standard filtration are permitted to be filtered. Machine (Additional info): CFS system Flow rate: 400 hl/h continuous Operating pressure: 6 bar Operating temperature: 105 °C Capacity: 1456 l Power: 10 A Guodpevcqv Nsfx Aabja Voltage: 220 V Water requirements: Cold water: min. 150 hl/h; Hot water (max 65 °C): min. 150 hl/h Compressed air: Process air: 4 – 6 bar; Control air: 5 – 8 bar Length: 1.4 m Width: 1.3 m Height: 1.9 m Basic structure: Base frame with control and measuring components and filter vessel; cleaning module Equipment: 98 filter cartridges, 3 piston diaphragm dosing pumps, centrifugal pump with frequency inverter (WT circuit), various analogue and digital sensors (flow, pressure, fill level, temperature, conductivity), various valves, control cabinet Weight: 3450 kg

Kondisi: bekas, Tahun pembuatan: 1991, Consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Feed tank 1,200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reducing station - Control cabinet with operator panel Machine (addition): Juice heating plant for pasteurisation Gedsvcqy Uspfx Aaboua Capacity: 100 hl/h Perm. operating overpressure PHE: 16 bar, test pressure 20.8 bar Heat exchange surface: 21 m² Length: 5.6 m Width: 2 m Height: 2.4 m Operation/control: Control cabinet with operation buttons Material: Stainless steel Base construction: Frame Equipment: 2 x tanks; plate heat exchanger; shell-and-tube heat exchanger; 2 x product pumps; measuring, sensor and control technology; various valves and other fittings.

Kondisi: bekas, Tahun pembuatan: 2006, Semi-automatic 5L party keg filling line, including 6-head filler, sealer, conveyor peripherals, washer, and inverter. Gsdpfx Aovcqpisabsua Machine (specification): semi-automatic, 6-head Power: 0.3 kW Current: 1.85 A Voltage: 400 V Frequency: 50 Hz Compressed air: 3.2 m³/h at 6 bar Length: 5000 mm Width: 3000 mm Height: 2300 mm Operation / Control: PLC S7-200 Equipment: single-head semi-automatic sealer, conveyor peripherals, washer, and inverter.

Kondisi: bekas, Tahun pembuatan: 1986, Fermentation cellar with 4 coolable stainless steel tanks. Tanks 1-3: C. Gresser, 1986, gross volume 20,460 liters each. The tanks stand on 4 feet and are equipped with 2 sidewall cooling zones each, dished ends (Klöpperböden), and a central outlet. Each tank features: safety valve, cleaning line, CIP spray head, sampling tap, side manway, and sight glass in the tank dome. Tank 4: C. Gresser, 1986, gross volume 11,569 liters. The tank stands on 4 feet and is fitted with sidewall cooling, dished ends, and outlet piping. Equipment includes: cleaning line, CIP spray head, sampling tap, side manway. Machine (additional): Coolable stainless steel tanks 3 tanks of: 20,500 liters each 1 tank of: 11,600 liters Material: Stainless steel Mounting / Position: standing on 4 feet Godpfsvcq Dtex Aabeua Equipment: cooling jackets, cleaning lines, CIP spray heads, outlet piping, safety valves, sampling taps, manways, sight glasses.

Kondisi: bekas, Tahun pembuatan: 1992, Storage cellar comprising 8 upright tanks with temperature control. Additional equipment: Refrigerated stainless steel tanks Gjdpovcqthjfx Aabsua Features: 8 storage tanks (6 x approx. 16,500 l, 2 x approx. 17,500 l), temperature control system, control panel, blending manifold

Kondisi: bekas, Machine (add-on): Years of manufacture: 1991 - 1995 Capacity: 50,000 bottles/hour Formats: 0.33 l LongNeck and 0.5 l NRW bottles; neck, front, body, and back labels; suitable for beer and Euro pallets Equipment: Decorker, bottle unpacker, bottle washer, empty bottle inspector, bottle filler and capper, fill level inspection, labeller, date coder, label inspection, crown cap inspection, bottle packer, full crate inspection, bottle and crate conveyor system Guedpfxovcqr Dj Aaboa

Kondisi: bekas, Tahun pembuatan: 1999, Stainless steel storage tank, horizontal with tank cooling. Machine (additional): coolable tank Capacity: 22,900 L Cooling jacket capacity, 4x: 12 L Operating pressure: 3 bar Operating temperature: 20 °C Length: approx. 4.7 m Width: approx. 2.7 m Gjdpfx Aovcqmzoabsua Height: approx. 2.9 m Material: stainless steel 1.4310 Orientation/position: horizontal Base construction: 6 dished ends feet Features: cooling jackets; manhole; sampling valve; high level probe; cleaning connection

Kondisi: bekas, Tahun pembuatan: 2003, Crushes bottles by pressing them. - High shredding performance - High volume reduction - Accident-safe (shatter-protected) - Low noise level [85/87 dB(A)] - Low wear rate - Compact design (minimal space requirements) Machine (specification): Bottle Shredding Plant Conti Shredding Capacity: 6,000 bottles/hour with feed conveyor Current: 6.5 A Voltage: 380V Gjdpfxsvcqhxs Aabsua Frequency: 50Hz Length: 1,520 mm Width: 1,300 mm Height: 2,600 mm Base construction: On ball feet Equipment: Shard collection tray, noise protection enclosure, feed chute for manual disposal of single bottles Weight: 700 kg

Tahun pembuatan: 2013, Kondisi: bekas, Cold water degassing module. Suitable for integration into existing control systems. Machine (add-on): Cold degassing Gjdpfx Asvcqqteabsua Capacity: 50 hl/h Residual oxygen content: 0.03 mg/l Column volume approx.: 300 l Operating temperature: 95 °C Operation / Control: PLC / Visualization by customer Material: Stainless steel 1.4301 Base construction: Dished feet Equipment: Two-chamber column; water pump; control panel

Tahun pembuatan: 2006, Kondisi: bekas, The VP 800 is a bottle unpacking and packing machine operating according to the pick-and-place principle, designed for fully automatic operation and used in the beverage industry. Gusdpfx Aasvcqgnjbea Machine type (addition): Linear packer Performance: 5.5 kW Current: 10 A Voltage: 400 V Frequency: 50 Hz Length: 3000 mm Width: 1540 mm Height: 2600 mm Formats: 24 x 0.33 L Vichy Conveying direction: right-to-left Operation / control: Simatic S7-99 Base construction: adjustable-height frame Equipment: approx. 3 m bottle outfeed; approx. 5.5 m crate infeed; approx. 4.5 m crate outfeed Weight: 1100 kg

Kondisi: bekas, Tahun pembuatan: 1991, Machine (Additional Information): 50,000 bph, crown caps Rated capacity: 50,000 bottles/hour Gjdpjvcqr Rjfx Aabeua Formats: 0.33 L Long Neck bottles, 0.5 L NRW bottles; crown caps Rotation: right to left Operation / Control: Siemens S5 Basic design: level filling machine with return air tube Features: 120 filling stations, 24 capping stations, double pre-evacuation, high-pressure injection

Kondisi: bekas, Tahun pembuatan: 2002, Machine (Additional): Crate Packer Capacity for plastic crates: 500 cycles/hour Power: 11 kW active power / 15 kVA apparent power Godpfxevcq Acs Aabsua Voltage: 230/400 V ± 5 % Frequency: 50 Hz ± 2 % Length: 4,170 mm Width: 2,550 mm Height: 2,650 mm Formats: Max. height – Product: 360 mm, Plastic crates: 380 mm, Cartons: 500 mm Equipment: 2 heads for 20/24 bottles each, version with T-bottle table, designed exclusively for glass containers, quick-change system for format parts included, complete crate inspection included, Krones Checkmat Weight: 4,300 kg

Tahun pembuatan: 2015, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: ODW 2687/20, CONTINUOUS PRESS FOR SANDWICH PANELS The unit is part of a larger production line; please refer to our other listings for more information. The system is fully enclosed and equipped with a walk-on service platform above the press. WORKPIECE DIMENSIONS (as used in previous production): Length: 2,000mm - 8,500mm Width: 1,500mm - 2,500mm Thickness: 12mm - 60mm Maximum batch weight: 60kg (can be increased without modification after consultation with manufacturer) TECHNICAL DATA: Total pressing force: 4,250kN Specific pressure: 10 - 20 N/cm² Number of hydraulic cylinders: 16 Hydraulic cylinder diameter: 110mm Individual cylinder control: yes Hydraulic operating pressure: 20 - 280bar Daylight opening: 150mm Maximum operating temperature: 80°C Gjdpeyt Rhkefx Aaboua Press weight approx.: 57,000kg Required air pressure: 6 - 10bar Required extraction volume at an air speed of v = 30m/s: 3,400m³/h Heating capacity: 2x 110,000 kcal/h Heating medium: hot water Supply temperature (customer side): 85 - 95°C Separate heating of upper and lower platens Cooling device for re-cooling the platens when changing products INSTALLATION DIMENSIONS: Width: 5,066mm Length: 9,604mm Height approx.: 5,013mm