Trailer industri VAL30 – 10 ton

Multi-Trans VAL30

Kondisi: sangat baik (bekas), panjang total: 6.000 mm, lebar total: 2.400 mm, tinggi total: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: Dsdpfx Aoxrtdqep Ejck The trailer is designed for use on level, paved surfaces for internal plant transport. Multiple Trailer Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: 16 t at 6 km/h with uniformly distributed load (surface load) on the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Dimensions approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covered with softwood planks, all-round edge protection. Steering: Four-wheel stub axle steering, tow bar can be raised, removed, and reversed from front to rear; hitch height on towing vehicle approx. 320 mm (other hitch heights permitted only upon notification), towing eye according to DIN 74054, Dm 40 mm, tow bar safety lock according to accident prevention regulations (UVV). Chassis: Both axles steered, elastic solid rubber tires approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 Ultramarine Blue. Additional Equipment: - 2 lashing bars made of round steel vertically welded into the outer frame on each longitudinal side - Double-acting wheel chock with holder and chain.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, jam operasional: 55.771 h, jam kerja laser: 35.157 h, daya laser: 3.200 W, ketebalan lembaran (maks.): 20 mm, ketebalan pelat baja (maks.): 20 mm, tebal plat aluminium (maks.): 8 mm, panjang meja: 3.000 mm, lebar meja: 1.500 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 150 mm, kecepatan pemposisian: 140 m/menit, akurasi pemposisian: 0,02 mm, tahun perombakan terakhir: 2024, panjang pemakanan sumbu X: 3.000 mm, panjang umpan sumbu Y: 1.500 mm, panjang umpan sumbu Z: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, unit pendingin, Laser dalam kondisi operasional, dapat dilihat dan diuji coba. Secara rutin diservis dan dalam kondisi teknis yang baik. Semua kaca spion telah diganti pada tahun 2024. Dodpsv Hxbbjfx Ap Eock

Kondisi: sangat baik (bekas), panjang total: 6.000 mm, lebar total: 2.400 mm, tinggi total: 750 mm, warna: biru, Operating Conditions: The industrial trailer is designed for use on level, paved surfaces within internal company transport. Train Operation: The trailer components are not designed (without a tow bar) for combined operation with multiple trailers. Payload: The industrial trailer can transport loads of up to 25 t at 6 km/h, provided the load is evenly distributed (distributed surface load) on the loading platform between the axles. Point or line loads are only permitted upon prior notification. Base Frame: The base frame of the industrial trailer is manufactured from a robust welded construction made of section steel. Loading Platform: Dimensions are approx. 6000 x 2400 mm; loading height approx. 750 mm. The platform is fitted with softwood planks and surrounded by an all-round edge protector. Dcsdpfx Asxrtb Nop Ejk Steering: Four-wheel stub axle steering, tow bar can be raised, removed, and switched from front to rear; hitch height at towing vehicle approx. 285 – 775 mm (other hitch heights only available upon request); towing eye to DIN 74054, 40 mm diameter, drawbar drop protection according to UVV regulations. Chassis: Both axles of the industrial trailer are steered. Elastic solid rubber tyres approx. 559 x 356 mm; wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Additional Equipment: Each of the two longitudinal sides of the industrial trailer features two upright lashing bars made of round steel welded into the outer frame sections. Rental or sale Europe-wide.

Kondisi: sangat baik (bekas), panjang total: 4.100 mm, lebar total: 2.100 mm, tinggi total: 560 mm, warna: biru, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on level, paved surfaces for internal company transport. Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permissible upon notification. Main Frame: Robust welded construction made of profile steel. Loading Platform: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, fitted with phenolic plywood. Deflectors on the front ends of the frame. Steering: Four-wheel axle steering, drawbar can be raised, but not repositioned or removed. Drawbar drop safety device in accordance with accident prevention regulations (UVV). Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint Finish: Top coat RAL 5002 ultramarine blue. Other Features: Dsdpfxjxrtgfe Ap Eeck - Collision protection on the front ends of the frame made of teardrop-shaped half shells. - All-round slip guard approx. 25 mm high - Lateral underrun protection at diagonal bar height - Pin coupling with captive bolt, spring-secured pin, diameter 30 mm, at the rear side - Double-acting wheel chock with chain - Two reflectors at the rear - Prepared for roof structure

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Dijual: 2 gudang tenda masing-masing ukuran 120 x 18 meter, produsen DallGruppen Harga baru untuk keduanya tanpa pintu samping – 2,4 juta euro Tinggi dalam ruangan sekitar 18 meter Dedpey Nnuhjfx Ap Eock Pembongkaran mandiri di Denmark (diperlukan truk dengan crane) Tidak cocok untuk Norwegia, Swedia, dan Finlandia karena salju sekitar 100 kg/m2 Inspeksi dipersilakan Lihat video dalam iklan Info lebih lanjut dan video tersedia atas permintaan

Tahun pembuatan: 2007, Kondisi: bekas, verzahnung-001 Dcodpsw Rf S Ejfx Ap Ejk

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 5.500 mm, jarak lintasan sumbu Y: 1.400 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 15 rpm, lebar meja: 1.200 mm, panjang meja: 6.000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Year of manufacture: 2006 Capabilities / Travel ranges: Longitudinal (X): 5,500 mm Vertical (Y): 1,400 mm Transverse (Z): 1,000 mm Clamping table: Length: 6,000 mm Width: 1,200 mm Number of T-slots on the table surface: 12 pcs Width of T-slots: 22 mm Distance between slots: 100 mm Max. workpiece weight: 13,500 kg NC rotary table: Position: Right side, flush-mounted into table surface Clamping surface: Ø 1,000 mm Positioning accuracy: 360 x 0.001° Max. workpiece weight: 3,500 kg Number of T-slots: 9 pcs Size of T-slots: 22 mm Distance between T-slots: 100 mm Paint finish: RAL 7035 light grey / RAL 5011 steel blue Dodpfxsy Tkgbe Ap Eock Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle, 28 kW Spindle speed range: Spindle speed: 15 - 5,000 rpm Torque: 815 Nm Feed rates: X, Y, and Z axes: 2 – 10,000 mm/min Max. rapid traverse: X, Y, and Z axes: 25,000 mm/min Max. feed force: 10,000 N Base area FLC6000: approx. 11.0 x 5.6 m Overall height: approx. 3.5 m Weight: approx. 35,000 kg HEIDENHAIN iTNC 530 HSCI Automatic MTE diagonal milling head Automatic tool changer Chip conveyor Coolant system with 70 bar & (through spindle coolant) RepairFIT is our proven solution for a cost-effective entry into our product lines. The machines available in this line are sourced through a strict selection process and subjected to a thorough inspection (deep-dive check) by us. After intensive cleaning, all identified defects and faults are professionally repaired by our qualified service team.

Kondisi: bekas, Technical Details: Pressing force: 100 t Installation height (table/ram, top): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 200 mm/s Ram speed, return: 200 mm/s Table size (L x W x H): 750 x 560 x 90 mm Table opening: Ø 26 mm Ram clamping surface (W x D): 530 x 400 mm Ram bore (diameter): Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor level: 720 mm Total power requirement: 17.0 kW Dcjdpfjvc Ax Nex Ap Eok Approx. machine weight: 5.5 t Approx. machine dimensions (L x W x H): 1.8 x 1.2 x 3.2 m

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Centre Height: 181 mm Centre Distance: 1000 mm Max. Grindable Workpiece Diameter: 360 mm Max. Load (Cantilevered): 1000 N (100 kg) Max. Load (Between Centres): 3000 N (300 kg) Dcjdpfetqf Rzex Ap Ejk Z-Axis Table Swivel Adjustment: 10° Table Drive (hydraulic): 0–4 m/min X-Axis Travel of Infeed Spindle: 80 mm Rapid Traverse (hydraulic): 50 mm Coarse Adjustment (Air Cushion): 280 mm Feed Drive via DC Motor Rapid Feedrate: 48 mm/min/Ø Feed Cycle: Plunge / Longitudinal Grinding 4 Pre-selectable Feedrates mm/min/Ø: 0.01–48 4 Pre-selectable Feed Amounts mm: 0.001–0.1 Spark-out Cycle in Traverse Grinding s: 0–99 / 0–99 strokes Creep Feed (Jog Infeed) mm/Ø: 0.001 Grinding Spindle Head Universal, Swiveling: 0–180° Grinding Wheel (External): D x W x Bore: 500 x 100 x 127 or 203.2 mm Grinding Wheel (Face, Option): D: 250 x 32 x 76.2 mm Grinding Wheel (Internal, Option): D: (2–250) mm Drive Power (External/Face): 5.5 (7.5) kW Drive Power Internal: 2.2 kW Peripheral Speed (External): 35 (50) m/s Grinding Wheel Wear (External): 160 mm/Ø Guard Width: 100 mm Grinding Spindle Diameter: 60 mm Internal Spindle Mount: 80 (100) mm Workpiece Spindle Head: Infinitely Variable Drive: Mk 4, 1/min: 30–270 / 50–450 Workpiece Spindle: Lockable Spindle Taper: MK 4/24 mm Spindle Nose for Flange: MK 4 mm cylindrical Ø63H6 x 6 Workpiece Headstock Swivels on Turning Part: 0–90° Tailstock: Quill Taper/Quill Diameter: MK 4/750 mm Quill Stroke: 45 mm Quill Force: 100–800 N / 250–1400 N adjustable Quill Actuation: Manual (foot switch) Quill Fine Adjustment: ±40 µm Electrical Connections: Total Machine Connected Load: 6.5–10 kW Grinding Spindle Head: 5.5 (7.5) kW Workpiece Spindle Head: 0.55 (1.1) kW Coolant Filtration: 0.75–2.2 kW Guideway Lubrication Pump: 0.1 kW Hydraulic Pump: 1.5 kW Hydraulic Tank: 80 litres Pneumatics: 6 bar Comparable with Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), Clamping force: 600 kN, Weight: 9 t, Operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Dedpjh Nypfofx Ap Eock