Sisipan untuk sistem ganti cepat

Multifix Halter C

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 690 mm, lubang spindel: 150 mm, diameter pembubutan: 1.040 mm, diameter pembubutan di atas carriage atas: 690 mm, tinggi pusat: 500 mm, lebar di tengah: 2.000 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 160 mm, jarak gerak sumbu Z: 380 mm, saluran batang: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross-slide: 690 mm Over bed: 1,040 mm In natural gap: 1,070 mm Bed width (hardened guideways): 670 mm Gap length: 480 mm Gap length in front of platform: 320 mm CARRIAGE Bed guide length: 1,020 mm Cross-slide travel: 640 mm Top-slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing size NNU: 190/260/69 mm Internal Morse taper in reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 – 800 rpm THREAD CUTTING Total threads: 398 Metric threads: 0.5 – 224 mm Module threads: 0.25 – 11 mod. Whitworth threads: 56 – 1/8 TPI DP (Diametral Pitch) threads: 112 – 1/4 DP FEEDS Number: 108 Longitudinal, cross, and top-slide: 0.05 – 22.4 mm/rev Hfjdpfx Aasyhhuwsnog RAPID TRAVERSE Longitudinal, cross and top-slide: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 – 500 mm Carriage steady rest capacity: 40 – 350 mm PERMISSIBLE LOAD Overhang: approx. 1,500 kg Between centres, without steady rest: approx. 5,000 kg Between centres, with steady rest: approx. 6,000 kg Machine weight: approx. 7,800 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Weiler E50 x 1000 Precision Lathe (2003) Manufacturer: Weiler Model: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43,000 h For technical data, see images. Scope of delivery: - Original documentation - Rota S Plus 250-62 - Steady rest Hsdpfx Aeyucf Rsanefg - Parat 4-position tool turret

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, daya motor spindle: 45.000 W, tinggi total: 2.120 mm, berat keseluruhan: 11.500 kg, produsen pengendali: SIEMENS, model controller: 810 D, panjang produk (maks.): 5.400 mm, jumlah sumbu: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, a center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it is equipped with a robust main drive rated at 45/37 kW. This machine is ideally suited for heavy-duty turning work and comes with accessories such as a chuck, a faceplate, and a steady rest. Contact us for further information about this machine. • Working area: • Distance between centers: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed carriage guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Spindle: • Spindle nose DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: Hedpfxex D Hz To Aanofg • Drive power (60% / 100% duty cycle): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gearbox stage 1: 1-280 rpm • Speed range gearbox stage 2: 4-900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill taper: MK 6 • Dimensions and weight of the machine: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul Work Performed: • Hardening and grinding of all bedways • Grinding of tailstock ways • Overhaul of the complete bed and cross slide assembly (grinding/scraping of all guides) • Renewal of bed carriage slideways • Renewal or shimming of keyways and ground guides • Replacement of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (regrinding MK 6 taper), replacement of spindle and nut • Adjustment of the tool system • Replacement of the main spindle motor • Inspection of auxiliary motors (X and Z axis) • Refurbishment of existing safety guards (sliding hood/chuck guard) • Replacement of all rotary, cam, and limit switches • Replacement of spindle and handwheel encoders • Renewal of flexible cables and coolant hoses in the working area • Replacement of centralized lubrication system • Renewal of energy chains • Painting as specified (standard structural basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional Equipment • 1x used 630 mm diameter chuck with various jaws • 1x used 1100 mm diameter faceplate • 1x used steady rest, max. 300 mm diameter • 1x used chip conveyor

Kondisi: bekas, Tahun pembuatan: 2006, en-GB: Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 850 mm Centre distance: 850 mm Longitudinal travel (Z-axis): 900 mm Cross travel (X-axis): 260 mm Control: Manuaplus 4110 Spindle speed: 10 - 3000 / 2x steps rpm Spindle torque: 920 Nm Spindle bore: 70 mm Cross travel (X-axis): 8 m/min Longitudinal travel (Z-axis): 10 m/min Operating hours (power on hours): approx. 34,600 h Tailstock taper ISO: MK 5 Hfedpfx Ajwtct Hjanog Tailstock quill stroke: 180 mm Total power requirement: 24 kVA Machine weight approx.: 5.2 t Machine dimensions (LxWxH) approx.: 2.2 x 3.2 x 1.9 m Multifix tool holder size C 3-jaw chuck Ø 250 mm Chip tray Manual hour counter Live centre in tailstock Operation via control panel and monitor Accessories: 4-jaw chuck Ø 250 mm with inner jaws Various chuck keys Machine lighting 8x base plates 4x wedge lifters Various pairs of jaws 1x closed steady rest Ø 100 mm

Kondisi: bekas, Tahun pembuatan: 1998, Technical Details: Swing diameter: 830 mm Turning length: 4,000 mm Swing diameter over cross slide: 540 mm Spindle bore: 130 mm Hsdjwwlt Rspfx Aanofg Speed range: 2 – 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed speed: 1 – 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Floor space required approx.: 7 x 2.2 x 2 m Equipped with R&D MTC-K cycle control MULTIFIX tool post, size D Coolant system

Kondisi: siap digunakan (bekas), Eine Flachschleifmaschine ELB-Schliff mit Positionsanzeige steht zur Verfügung. Magnetplattendimensionen X/Y: 900mm/450mm, Schleiflänge: 900mm, Schleifbreite: 450mm. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich. Hfsdpjya Hw Iofx Aansg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, lubang spindel: 160 mm, Drehdurchmesser Bett Ø 1040 mm Drehdurchmesser Schlitten 710 mm Drehdurchmesser Grube Ø Hfjdpfx Aextbf Eeanjg 1580 mm Drehlänge 3000/4500 mm Grubenlänge 1500 mm Spindelbohrung 160 mm Leistung Spindel 40 kW Bettbreite 800 mm Spindelaufnahme 6 Mk Werkstückgewicht 3500 Drehzahl 800 Rpm Vorschub X - Achse 10000 mm/min. Vorschub Z- Achse 10000 mm/min.

Kondisi: bekas, 1 Hfsdoxukqyepfx Aanjg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, 300 mm turning diameter Turning length 1700 mm Swing diameter over bed slide 600 mm Total power requirement 12.5 kW O F F E R We can offer you, subject to prior sale and errors excepted, ex-stock without obligation: WEISSER HEILBRONN LZS Universal Lathe Type HEKTOR Year of manufacture 1980 _____ Centre height 300 mm Max. swing diameter over bed 600 mm Max. swing diameter over cross slide 390 mm Distance between centres 1,700 mm Spindle bore / Morse taper 5 88 mm 14 spindle speeds 18 – 900 RPM Longitudinal feeds 0.028 - 0.8 mm/rev Facing feeds 0.03 - 0.5 mm/rev 40 metric threads 0.4 – 14 mm/rev 38 Whitworth threads 2 – 72 TPI Spindle drive 12.5 kW Total drive 14 kW - 380 V - 50 Hz Weight 2,500 kg Accessories / Special features: • Hardened and ground guideways • Removable gap bridge for larger turning diameter • 3-axis HEIDENHAIN digital readout with tool memory function • Mounted FORKARDT 3-jaw chuck 315 mm Ø equipped with a robust chuck guard complying with CE regulations Hodpfxoytg Uyj Aanofg • Equipped with a 4-jaw chuck 315 mm Ø and a 3-jaw chuck 315 mm Ø, with an additional steady rest • Quick-change toolholder with 6 inserts • Rear chip guard wall with coolant system and separate chip tray • Drill chuck and thread cutting chuck, miscellaneous accessories, etc. Condition: good – ready for demonstration / Machine is ideal for the workshop Delivery: ex-stock, as inspected Payment: strictly net, upon collection after receipt of invoice We look forward to receiving your order. Further lathes of all sizes available in stock – please enquire.

Kondisi: bekas, Technical Details: Swing diameter over bed: 830 mm Swing diameter over cross slide: 540 mm Turning length: 3000 mm Swing diameter over support: 540 mm Distance between centers: 3000 mm Faceplate diameter: 800 mm Rapid traverse X-axis: 4 m/min Control: MTC K (Monforts) Speed range: 2 - 1,600 rpm Spindle bore: 88 mm Tailstock quill taper: ISO MK6 Tailstock quill stroke: 200 mm Max. workpiece weight between centers: 1,250 kg Max. workpiece weight - unsupported: 3,000 kg Swing diameter in gap: 1,200 mm Gap length: 310 mm Machine weight approx.: approx. 6.85 t (without chip conveyor and coolant tank) Machine dimensions approx. LxWxH: 2.55 x 1.1 x 1.29 m CNC cycle lathe Machine overhauled in 2010 Operation via control panel Hfedpowmlknefx Aanjg Thread cutting via calculation interpolator of the NC control Chip conveyor manufacturer: Kabelschlepp Three-jaw chuck D=500mm without clamping jaws Various accessories