Oven sirkulasi udara/oven kamar 260°C

Nabertherm Lacktrockner 260°C KTR 8000 LS nach DIN 1539

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Control: Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travels (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3,000 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg (K250) Dimensions of the complete unit: 2670 x 2870 x 2645 mm Total weight of the unit: 6,300 kg The machine will be cleaned, overhauled, and all functions will be tested by us after receipt of order. Optional: - Commissioning at your location - On-site training - Chiller unit Dodpfeuuz Iiox Adgeul - Transport - Clamping bar set

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Dedpfegwt S Tox Adgoul Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH

Kondisi: baru, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiusverschil ----- 50/230 Buigsnelheid/herhaalbaarheid ----- 230º/s. ±0,05° Dorne-lengte ----- 1 000–∞ Dedpfxega T E Ao Adgsul Gewicht ----- 5000 kg Machinedimensies ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten volgens VDMA-, ISO- en DIN-normen OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering, elektromagnetisch of optisch * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte

Kondisi: baru, Tahun pembuatan: 2024, Tunneltyp-Teilereinigungsanlage für Metall- und Kunststoffteile. Einsatz in diversen Branchen wie Automobilindustrie, Lebensmittelindustrie, Metallbearbeitung, Blechverarbeitung, Kunststoffbehälter usw. Funktionsprinzip Das Werkstück gelangt über ein Bandförderer-System in den Reinigungstunnel; durch gezielt platzierte Düsen werden sämtliche Bereiche des Werkstücks gereinigt. Während das Werkstück den Tunnel durchläuft, wird es kontinuierlich mit einem Gemisch aus erhitztem Wasser und Reinigungschemikalien unter Druck gewaschen. Dabei werden sämtliche Öle, Späne und sonstige industrielle Verunreinigungen von der Oberfläche entfernt. Tunnelwaschanlagen werden sowohl standardisiert als auch individuell anwendungsspezifisch von der INTERSONIK-Ingenieurabteilung konzipiert. Ablauf des Reinigungsprozesses Waschen, Passivieren und Trocknen werden von den Intersonik-Prozessingenieuren exakt entsprechend der gewünschten Ergebnisse mit umweltfreundlichen Intersonik-Chemikalien entwickelt. Betriebsablauf ► Vorwäsche ► Hauptwäsche ► Spülung ► Passivierung ► Trocknung Anwendungsbereiche ► Automobilindustrie ► Wehrtechnik ► Lebensmittelindustrie ► Für alle Fertigungsindustrien bei Serienfertigung und Wartungszwecken Dodpfod I Azvsx Adgoul ► Metallmöbelindustrie Das Förderbandsystem wird von INTERSONIK speziell nach Ihren Anforderungen und Werkstücken konstruiert und gefertigt. Förderbandgeschwindigkeit ist einstellbar. Automatisches Flüssigkeitsnachfüllen ist Standard. Elektrische Beheizung ist Standard, Wärmetauscher- und Brennerbeheizung sind optional. Alle Betriebsdaten können über Digitalanzeigen eingesehen und gesteuert werden. SPS-Steuerung ist optional verfügbar. Alle Flüssigkeitstanks sind wärmeisoliert. Absaug- und Nebelabscheideeinheit sind standardmäßig integriert. Für weitere Optionen und Details stehen wir Ihnen gern zur Verfügung. Tunnelwäsche, automatische Teilewaschanlage, Kfz-Teilereinigung, Metallreinigung, Teilereiniger, Entfettung, Spritzreinigung, Druckwaschmaschine

Kondisi: bekas, Plate width: 2,510 mm Plate depth: 5,135 mm Dedpfx Adohpvavjgeul Plate height: 345 mm Weight: approx. 10 t Space requirement: approx. 2.5 x 5.1 x 0.38 m T-slot dimensions: 28 x 45 mm – Height: 48 mm Number of slots: 9 Slot pitch: 220 mm Edge distance: 240 mm Slot size: 28 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2014, kapasitas angkut: 180 kg, jangkauan lengan: 2.900 mm, We at Binici MB GmbH have additional industrial robots available in-house. All our robots are fully operational (with complete accessories). Dsdpfx Adowxxzwjgjul We are happy to provide you with expert advice.

Tahun pembuatan: 2012, Kondisi: baik (bekas), nomor mesin/kendaraan: ENOG, Demag KBK overhead crane rail system, approx. 8x4m Load capacity / lifting capacity: 250 kg - 0.25 t Technical data of the system: - Crane runway made of Demag KBK1+2 rails System is delivered complete: - KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Incl. Demag DC-COM 250kg electric chain hoist Duodpfx Asmqf Nfedgol Crane has been dismantled and is immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125kg to 1,600kg Please inquire about your crane rail with desired load capacity and dimensions.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 600 mm, tegangan masuk: 400 V, berat keseluruhan: 3.560 kg, tinggi benda kerja (maks.): 170 mm, The high-speed deburring machine for deburring, edge rounding, and finishing of steel parts up to 600 mm width. This deburring and finishing machine from Q-Fin is specifically designed for applying a large radius of up to 2 mm on steel sheets. With the Q-Fin SER600 Super Edge Rounder, it is possible to deburr, grind, edge-break, round, deslag, remove oxide layers, or create a line finish on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2025 model is equipped with a magnetic support, making it suitable for processing steel cut parts and other ferromagnetic materials. The machine features 5 processing stations and is conveniently operated via an HMI touchscreen on the machine's front. The first station of the SER600 consists of a grinding unit. The abrasive belt of this unit removes burrs and/or burn marks from the product surface. If no burrs are present, the abrasive belt can be omitted or removed. It is also possible to finish the product with a finer abrasive belt or with a Scotch-Brite belt. Dujdpfx Aol Dw D Esdgjl The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations comprise 2 round brushes rotating in opposite directions (left/right). With the brushes, you can break sharp edges or—thanks to the unique combination of two brush systems—apply a radius of up to R=3 mm. By installing special brushes, the SER600 with magnet system is also highly effective for removing oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without pressure loss. This extraction system, made entirely of stainless steel, is a wet operating unit that removes grinding dust from stainless steel, steel, and aluminum, eliminating fire and explosion risks. According to Q-Fin, it is the safest, simplest, and most sustainable way to extract grinding dust. With the WES6000, there is no more grinding dust in the air and/or in the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x only a few months in use, like new (year of manufacture 2024) Both machines can be viewed by appointment in Bergeijk. Both machines have a 1-year warranty on the structure and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Connected load for the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning Dujdpfx Adjfzktzsgol The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: bekas, Tahun pembuatan: 2013, Venjakob Perfect Spray Coating Line: - Manufacturer: Venjakob - Year of manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped configuration with 180° transfer Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space for sanding machine (optional) 3. VEN SPRAY PERFECT automatic spray machine, length 5,510 mm Dsdpfsu Afu Rex Adgsul 4. Flash-off dryer OIR, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180° transfer station with nozzle dryer 7. Fresh air supply unit for transfer station, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge section, belt from UV dryer 13. Hall supply air unit, 30,000 m³/h Further information: On request