Pusat pembubutan dan penggilingan CNC

Nakamura-Tome MX-100

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. Ihodjxmhdnspfx Abhju For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request.

Kondisi: sangat baik (bekas), 1 Ihsdpfx Aboxuqw Hohsu

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 4 MAIN SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11/15 [kW] - Torque: 51/110 [Nm] - Spindle speed: 4500 [rpm] - Max. bar capacity: 66 [mm] - Max. machinable diameter: 340 [mm] - Max. diameter over bed: 400 [mm] - Max. main chuck diameter: 190 [mm] - Minimum C-axis resolution: 0.001 [degree] TURRET - Number of positions: 12 - Number of driven positions: 12 - X/Z travel: 227.5 [mm] - Y travel: +/- 41 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 3.7/5.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 21 [kW] WEIGHT AND DIMENSIONS - Footprint: 2000 x 1600 [mm] - Machine height: 1850 [mm] - Machine weight: 4300 [kg] ACCESSORIES - CNC control: Fanuc - Interface: Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chip conveyor - Oil mist extraction: DONALDSON - Tool measurement probe - Parts catcher - Parts conveyor belt Ihjdjvzt Hbopfx Abhsu - Fire extinguishing system*: SIEMENS * NB: Functionality not guaranteed. To be checked by a qualified company appointed by the buyer. - Number of driven tool holders: 2 - Number of fixed tool holders: 4 - Collet chuck: EROWA

Kondisi: sangat baik (bekas), Pemegang alat dan pemegang pahat bubut Produsen: SANDVIK COROMANT Set VDI40-CAPTO C4 Mounting: Ø 40 mm ----- Terdiri dari: No.: 1405 =2x Pemegang alat baja VDI40 C4 No.: C4-RC2040-51030 Berat/pcs: sekitar 4kg Harga satuan netto: 350€/pcs ----- berbagai pemegang pahat baja: 2x Pemegang bor dalam 90,00€/pcs 2x Pemegang bubut luar 120,00€/pcs 1x Pemegang pisau potong 120,00€/pcs _____ Iedpfx Ajvtzpbsbhohu Pemegang pahat bubut, pemegang baja, alat bubut, pemegang pahat potong, pemegang alat, pemegang alat aksial. ----- -Berbagai tipe: lihat foto, gambar tambahan atas permintaan -Hanya dijual satu paket lengkap Ongkos kirim atas permintaan

Kondisi: hampir baru (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 200 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 280 mm, produsen pengendali: HEIDENHAIN iTNC530, berat benda kerja (maks.): 15 kg, lebar meja: 200 mm, panjang meja: 200 mm, kecepatan spindel (min.): 42.000 rpm, cnc-530-specs Iodpexpg H Hofx Abhjhu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 230 mm, jarak gerak sumbu Z: 640 mm, daya motor spindle: 15.000 W, tinggi total: 2.120 mm, berat keseluruhan: 7.100 kg, panjang produk (maks.): 2.542 mm, jumlah sumbu: 3, This 3-axis horizontal lathe, CMZ TA-20TY-640, was manufactured in 2023. It features a maximum turning diameter of 460 mm, a turning length of 640 mm, and a robust 15 kW spindle delivering up to 4,000 rpm. The machine offers a Y-axis travel of / mm, 15 driven tools with speeds up to 12,000 rpm, and a bar capacity of 66 mm. Take advantage of the opportunity to purchase this CMZ TA-20TY-640 horizontal lathe. Contact us for more information about this machine. • Max. turning diameter – 460 mm • Max. turning length – 640 mm • Swing over bed – 760 mm • Swing over saddle – 600 mm • Y-axis travel – mm • Bar capacity – 66 mm • Chuck size – A2-6" Ihjdpfxex H U Dwj Abhju • C-axis – 0.001° • Number of tools – 15 • Driven tools – 15 • Driven tool power – 8.1 kW • Driven tool speed – 12,000 rpm • Tailstock taper – MT3 • Spindle hours – Less than 1,500 h (to be confirmed) Additional equipment: • Chip conveyor – Yes, side discharge • Tool presetter – Yes • Automatic tailstock slide – Yes • Automatic doors – Yes • High-pressure coolant pump – 6 bar • Robot interface – Yes • Set of tool holders – Yes • Spindle cooling (cooling unit instead of air/oil heat exchanger) – Yes • Filtration – 90 µm

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-5" - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Max. bar capacity: 51 mm - Max. machining diameter: 195 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5" - Spindle drive power: 7.5 kW - Spindle speed: 6000 rpm - Max. bar capacity: 42 mm - Minimum C-axis resolution: 0.001° TRAVELS - Z-axis travel: 400 mm - X-axis travel: 150 mm - Rapid traverse speed: 36 m/min - Distance spindle/sub spindle: 600 mm TURRET HEAD 1 - Number of stations: 24 - Number of driven stations: 12 - X/Z axis travel: 400/150 mm - Y axis travel: +/-40 mm - Driven tool speed: 6000 rpm - Driven tool power: 7.1 kW TURRET HEAD 2 - Number of stations: 9 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 3072x1974 mm - Machine height: 1799 mm - Machine weight: 6500 kg EQUIPMENT Ihodpfx Aew Efgaebhju - Control: Fanuc 0i-TF PLUS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming - 3-colour status lamp - Coolant tank * Internal coolant supply (ICS) - Chip conveyor: DROITE LNS MH500 - Tool measurement probe - Parts removal - Parts conveyor belt - Bar feeder interface - Electrical transformer

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 2.2 / 3.7 [kW] - Spindle speed: 200 - 10,000 [rpm] Iedpfxou Uu Sys Abhjhu - Max. bar diameter: 20 [mm] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Spindle drive power: 1.5 / 2.2 [kW] - Spindle speed: 200 - 12,000 [rpm] - Minimum C-axis resolution: 0.001 [deg] * Travel X/Z: 488 / 335 [mm] TURNING-MILLING SPINDLE - Travel X/Z: 289 / 305 [mm] - Travel Y: 75 (-15/+60) [mm] - B-axis stroke: 180 [deg] - Minimum B-axis resolution: 0.001 [deg] - Tool type: 15T - Spindle speed: 300 - 30,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 24 OPPOSITE MACHINING - Number of positions: 4 - Number of positions: 3 WEIGHT AND DIMENSIONS - Machine weight: 2,700 [kg] MACHINE HOURS - Power-on hours: 52,500 [h] - Operating hours: 11,639 [h] ACCESSORIES - Control: Fanuc 31i Model B5 - 3-color status lamp - Coolant tank: Hydro-Fluid HP3 * with high-pressure pump: 40 - 170 [bar] - Chip conveyor - Spindle cooling - Parts removal - Parts conveyor belt - Bar feeder: LNS EXPRESS 220 S2 - Fire extinguishing system* * NB: Functionality not guaranteed. Inspection by a qualified third-party company recommended. - Electrical transformer

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 8 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 15 kW - Spindle speed: 5000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 210 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6 - Spindle drive power: 15 kW - Spindle speed: 5000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 210 mm - Minimum C-axis resolution: 0.001° - Travel: 550 mm RIGHT UPPER TURRET HEAD - Number of stations: 12 - Number of live stations: 12 - Travel X/Z: 245 x 520 mm - Travel Y: +/- 50 mm - Driven tool speed: 6000 rpm - Driven tool power: 7.5 kW LEFT LOWER TURRET HEAD - Number of stations: 12 - Number of live stations: 12 - Travel X/Z: 210 x 520 mm Iedpfx Aov R Hwfobhohu - Travel Y: +/- 50 mm - Driven tool speed: 6000 rpm - Driven tool power: 7.5 kW ELECTRICAL SUPPLY - Total power consumption: 85 kVA WEIGHT AND DIMENSIONS - Required floor space: 5000 x 3500 mm - Machine height: 2500 mm - Machine weight: 9500 kg OPERATING HOURS - Operating hours: 5811 h EQUIPMENT - CNC control: Fanuc 31i-Model A - Electronic handwheel - 3-color status lamp - Coolant tank * with high-pressure pump: 2 x 15 bar * with coolant cooling - Chip conveyor: right-hand - Parts catcher - Parts conveyor belt - Bar feeder: IRCO SIMAG 70.1 - Tool probing system - Number of driven tool holders: 3x radial / 2x axial toolholders - Number of fixed tool holders: see photo - Collet chuck: 2 x HAINBUCH

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 16.661 h, Unit Kontrol Merek: SIEMENS Model: 840 D Penggerak Utama Ihedpfxjx H U Ezj Abhju Jumlah sumbu: 5 DMG MORI Beta 800 TC 5-sumbu ini diproduksi pada tahun 2015. Dilengkapi dengan kontrol Siemens sl Operate 3G, spindle kontra dengan sumbu C, serta chuck ganda di spindle utama dan kontra. Memiliki majalah rantai alat 48-slot tipe HSK 63A dan sistem pendingin bertenaga 8/20 bar, sangat ideal untuk operasi turn-mill yang kompleks. Jangan lewatkan peluang untuk membeli pusat turn-mill DMG MORI Beta 800 TC ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Pembubutan