Mesin bubut poros utama/penggerak/NARDINI MS

NARDINI MS 125 E

Kondisi: baru, Tahun pembuatan: 2025, New machine. Please inquire for the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Connection voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Bwsdpfx Aerah S Hsm Ijl Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Capacities: Cutting capacity 0° round (solid material): 355 mm Cutting capacity 0° square (solid material): 300 mm Cutting capacity 0° rectangle vertical (solid material): 300 x 490 mm Cutting capacity -45° round (solid material): 290 mm Cutting capacity -45° square (solid material): 250 mm Cutting capacity -45° rectangle vertical (solid material): 250 x 250 mm Cutting capacity +45° round (solid material): 350 mm Cutting capacity +45° square (solid material): 290 mm Cutting capacity +45° rectangle vertical (solid material): 290 x 340 mm Cutting capacity +60° round (solid material): 230 mm Cutting capacity +60° square (solid material): 180 mm Cutting capacity +60° rectangle vertical (solid material): 180 x 220 mm

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Bodpfx Aeu Rptysm Iewl Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4,867 rpm Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Kondisi: baru, Center distance ----- 1000 mm Center height ----- 230 mm Swing diameter ----- 460 mm Spindle bore ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 kW Weight ----- 1750 kg INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool post, type Multifix TOOB2 with 4 holders * 3-jaw self-centering chuck 250 mm * 4-jaw independent chuck 320 mm * Faceplate 350 mm * Fixed and traveling steady rest * LED work light and coolant system Bwodpfx Ask Iug Tom Iol * Electric brake (CE) * Foot brake * Box with various tools

Kondisi: bekas, Tahun pembuatan: 2014, tinggi total: 1.950 mm, panjang total: 2.400 mm, lebar total: 1.600 mm, technikai_adatok_2014 Bedpfx Amexq Aqwo Ijwl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 5.327 h, jarak pergerakan sumbu X: 762 mm, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 3, HAAS VF-2SS tiga sumbu ini diproduksi pada tahun 2014. Mesin ini dilengkapi dengan fitur-fitur canggih seperti pengukuran alat dan probe ukur untuk presisi yang lebih tinggi. Dengan waktu pemesinan (machining time) 5327 jam, pusat pemesinan vertikal ini dirancang untuk operasi yang efisien. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan mesin HAAS VF-2SS yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. • Pendingin tekanan tinggi internal (IKZ) • Probe pengukur • Pengukuran alat • Konfigurasi sumbu: 3 sumbu (X/Y/Z) • Frekuensi: 50 / 60 Hz • Daya pemutusan hubung singkat: 10.000 A • Arus hubung singkat: 5.000 A RMS simetris • Klasifikasi busur listrik: • Model 208-240 VAC: HRC-1 • Model 360-480 VAC: HRC-2 • Waktu pemesinan: 5327 jam Bwjdpjyux Saofx Am Iol

Tahun pembuatan: 2012, Kondisi: diremaj di bengkel (bekas), Mesin Bubut Presisi Konvensional WEILER "CONDOR VC" Dengan indikator digital Siemens 3 sumbu Tahun pembuatan: 2012 Lubang spindle: 56 mm Jarak pusat: 800 mm Diameter ayun di atas ranjang: 205 mm Rentang putaran: 30 – 3500 rpm Dengan perlengkapan berikut: Pemegang perkakas Multifix Pelindung serpihan dengan pencahayaan dalam Sistem pendingin cairan Cekam 3 rahang Ø 200 mm Pelindung cekam Lunette pengikut Ø sekitar 150 mm Tailstock dengan pinol pengebor yang dapat ditarik Manual pengoperasian Bwsdpfxsxykz Ao Am Ijl

Kondisi: sangat baik (bekas), Heidenrich & Harbeck B3 SB mesin bor lubang dalam Kapasitas 10.000 mm, 4 penyangga tetap Bwodpow U Uhkjfx Am Ijl 2 peredam batang bor Baki dan keranjang serbuk logam Perlengkapan alat, Putaran berlawanan

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.050 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 520 mm, kecepatan rotasi (maks.): 12.000 rpm, CNC control Heidenhain TNC 430 32-station tool changer Bwodpfx Aju Hf Ryjm Iel Coolant system 2x chip conveyors Touch probe The total X-axis travel distance is 2050 mm, which means you can mill up to 2 meters in one pass. A partition wall is included. When the partition is installed, the X-travel is divided accordingly. Technical data / technical details: X-axis travel: 2050 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Spindle taper: SK40 Spindle speed range: 12,000 rpm Number of tool slots in changer: 2x 32 Spindle drive power: 36 kW Weight approx.: 12,800 kg Technical data, accessories, and machine description are non-binding.

Kondisi: bekas, nomor mesin/kendaraan: 1 284 066, Chuck diameter: 200 mm Bwodpfxjcm Tgke Am Isl Through bore: 50 mm Mounting, short taper according to DIN 55027: Size 6 External diameter of the clamping cylinder: 290 mm Overall height (clamping cylinder to front of chuck without jaws): 150 mm Pneumatically actuated

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.400 W, jumlah sumbu: 3, This 3-axis vertical machining center HAAS VF-4SS was manufactured in 2008. It features a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer with 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, you should consider the HAAS VF-4SS we are offering for sale. Contact us for further information. Bwjdex D Irmopfx Am Iel • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feedrate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Auger-type chip conveyor • Additional high-pressure filtration system