Mesin cetak ganda

National Machinery M34 S1

Kondisi: bekas, Tahun pembuatan: 1981, nomor mesin/kendaraan: 283, Nomor Lg.: 26208 Data Teknis: - Tinggi tengah: 120 mm - Jarak antara tengah: 450 mm - Diameter terbesar yang dapat dikerjakan di atas meja: 250 mm - Diameter lubang spindel: 23 mm - Dudukan spindel dengan ulir sesuai DIN 55027 - Kerucut dudukan pinola kepala tetap: MK 2 - 20 kecepatan spindel: 60 - 3000 putaran/menit - Gerakan: - Memanjang: 0,03 - 3,0 mm Iedpfszyl H Hex Ankstn - Melintang: 0,015 - 0,150 mm - Pitch ulir: 0,25 - 5 mm - Penggerak: 400 V / 1,1 / 1,5 kW - Kebutuhan ruang: kira-kira L 1200 x T 1250 x D 650 mm - Berat: kira-kira 700 kg - Termasuk: - Chuck 3 rahang - Pemegang pahat baja pengganti cepat - Titik penanda yang berputar bersama - Lemari perkakas terpisah dengan berbagai aksesori

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2023, SACMA SP22 MESIN TEMPA PROGRESIF DINGIN 2 MATRIKS 2 PUNCH Direkondisi total - Setara baru (sesuai standar CE) Itodpfx Anopgw Ugekon Dengan unit setengah berlubang terpasang RENTANG PRODUKSI: Diameter: 10x100 mm Tipe mesin: header transfer 2 die – 2 blow Rentang diameter: 10 mm Jumlah die: 2 Jumlah stasiun (termasuk potong): 3 Panjang pemotongan: 110 mm Panjang poros di bawah kepala: 100 mm Output – pcs/menit: 170

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: Iedpfx Anjvtp Edskstn >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Tahun pembuatan: 1986, Kondisi: bekas, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Itsdpfen Ard Djx Ankon

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) Ijdpfxjvivmye Anketn About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160 B, tahun pembuatan 1991, tampilan digital 3 sumbu, tinggi pusat 160 mm, jarak antar pusat 650 mm, kecepatan spindle hingga 2.500 rpm, tailstock, set collet, chuck, 2 holder. Itedpjzg Hvvefx Ankjn

Kondisi: baik (bekas), Tahun pembuatan: 1992, Mesin Bubut LZ WEILER Tipe: PRAKTIKANT 160 B Thn.1992 dengan indikator digital 3-sumbu Heidenhain, chuck 160 mm RÖHM, pemegang alat Multifix B, tailstock dengan senter, perangkat penjepit dengan collet 1 – 29,5 mm, sistem pendingin. Putaran di atas alas: 320 mm Putaran di atas support: 198 mm Panjang pembubutan: 650 mm Lubang spindle: 40 mm Kecepatan spindle: 96 – 2500 rpm Info lebih lanjut lihat data mesin. Isdpfx Ajy Rpr Rjnkstn Pemandu dalam kondisi baik, dokumentasi mesin tersedia.

Kondisi: bekas, Tahun pembuatan: 1999, Diameter ayun di atas meja 280 mm Diameter ayun di atas penyangga 150 mm Panjang ayun 500 mm Tinggi pusat di atas meja 140 mm Jarak antar pusat 500 mm Lebar meja 205 mm Lubang spindel 40 mm Rentang kecepatan – variabel 30 – 4.000 RPM Diameter chuck 3 rahang 140 mm Pegang cepat MULTIFIX Tipe A Daya penggerak – motor spindel 4,0 kW Kerucut penerima pada pin tailstock MK 3 Diameter pin 40 mm Langkah pin 85 mm Tegangan operasi 400 V Total kebutuhan daya 7,5 kW Berat mesin sekitar 800 kg Kebutuhan ruang sekitar 1,40 x 0,95 x 1,55 m Itsdpfx Aez Abw Hsnkjn !!! Kondisi seperti baru !!! Mesin berasal dari sekolah kejuruan! Hanya digunakan sebagai mesin demonstrasi. - Nomor pabrik: 154 - Tampilan digital 3 sumbu SIEMENS - Chuck 3 rahang RHÖM - Pegang baja cepat MULTIFIX - Ujung senter yang berputar

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm Itedpfx Aeu Aftgenken >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: bekas, Tahun pembuatan: 1972, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M06L/7593, Nomor Penawaran: M06L/7593 Jenis Mesin: Mesin Press Double Info: Ejeksi positif stempel Merek: PELTZER-EHLERS Ijdpfxowi S Swj Ankotn Tipe: DKP16 Tahun Pembuatan: 1972 Rentang Diameter: 8-16 mm Panjang tangkai di bawah kepala: 25-180 mm Panjang potong maks.: 220 mm Kapasitas - unit/menit: 70 Lokasi: Di gudang kami