MESIN BUBUT

Weiler Primus

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Weiler Primus dalam kondisi terbaik. Dapat dilihat saat tersambung listrik. Data teknis: Jarak antar senter: 450 mm Tinggi senter: 120 mm Prodsxzi I Dspfx Ab Isd Lubang spindle: 23 mm Kecepatan putar: 30 – 3000 rpm Tailstock: MK 2 Daya penggerak: 1,5 kW Berat: 350 kg Dimensi: 1200 x 650 x 1550 mm

Tahun pembuatan: 1990, Kondisi: bekas, Pressure: 75 t Outreach: 300 mm Stroke: 8 - 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram area: 430 x 230 mm Pass-through opening in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, featuring new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for mounting tool change consoles - 2 roller rails in the table Pjdjd Nl E Uepfx Ab Ijrd - mechanical overload in ram (rupture plate) The following work will be carried out on the machine / partial overhaul: - Machine will be completely disassembled, checked, seals replaced, defective parts exchanged, etc. - Machine will be newly painted - new Balluff cam switch mechanism - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - current UVV (accident prevention regulation) inspection with brake time measurement

Kondisi: siap digunakan (bekas), en-001 Podpfxjxw R N Ue Ab Iord

Kondisi: sangat baik (bekas), WEILER PRIMUS Tipe MD-G - Ketinggian senter: 125 mm - Jarak antara senter: 400 mm - Rentang kecepatan putar: 40–3000 rpm - Lubang spindle: 24 mm - Pelindung chuck elektrik Prsdpfxjxw H Dbe Ab Isd - Multifix dengan sisipan - Tailstock dengan pinol bor - Chuck empat rahang - Lampu kerja - Pembatas ranjang - Dokumentasi Dimensi: P x L x T: 1,3 x 0,8 x 1,6 meter / Berat: 450 kg Kesalahan dan kekeliruan informasi dapat terjadi.

Kondisi: baru, Table length: 1200 mm Table width: 1200 mm Table height: 900 mm Table load capacity: 3000 kg Machine weight approx. 0.32 t Dimensions (L x W x H): 1.2 x 1.2 x 0.9 m Prjded Iinfepfx Ab Isd Welding Table / Perforated Table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy, plasma-nitrided steel S355J2+N (St 52/3). Plasma nitriding provides a hard surface layer. Height adjustable from approx. 880 – 980 mm. Ribbed underside for reinforcement. Includes floor bearing. Accessories available as an option!!!

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm Pedeu Aftgepfx Ab Isrd >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: bekas, L + Z lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 exchangeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centering point for collet holder - Emergency stop - Folding chuck guard - Splash guard - Machine light - Electrical diagram Prsdportd Uwofx Ab Ijd - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Kondisi: baru, Bernardo lead and feed screw lathe Master 180 including 3-axis digital readout Centre distance 1000 mm Centre height 180 mm Swing over bed 360 mm Swing over gap* 480 mm Swing over cross slide 220 mm Bed width 185 mm Spindle bore 51 mm Spindle mount DIN 55029, D1-5 Speed range (8) 70 - 2000 rpm Longitudinal feed range (32) 0.052 - 1.392 mm/rev Cross feed range (32) 0.014 - 0.380 mm/rev Metric threads (26) 0.4 - 7.0 mm Inch threads (34) 4 - 56 TPI Quill diameter 42 mm Quill travel 110 mm Quill taper MT 4 Motor output S1 100% 1.5 kW (400 V) Motor input S6 40% 2.2 kW (400 V) Machine dimensions (W x D x H) 1920 x 750 x 1600 mm Weight approx. 540 kg * Removable bed gap: 225 mm Scope of delivery • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, according to DIN 55029 • Fixed steady rest – max. diameter pass-through 70 mm • Travelling steady rest – max. diameter pass-through 50 mm • Coolant device • Initial fill with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • Four-way tool post • Safety guard for four-way tool post • Slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 live centres • Foot pedal with brake function according to CE • Motor with magnetic brake according to CE standard Predpfx Asd Du Tieb Iod • Machine base

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Prjdpsvtp Edsfx Ab Ijd Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe in Excellent Original Condition!!! Technical Data: >> Year of manufacture: approx. 1992, Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> New collet attachment, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders Prsdpfxswkh Abe Ab Isd About the Machine: This offer is for a Weiler Primus GS lead and feed screw lathe in excellent original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in top condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Tahun pembuatan: 1962, Kondisi: bekas, nomor mesin/kendaraan: 1790, manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2500 kg Machine No.: 1790 General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-to-use condition Broaching stroke: 1320 mm Broaching stations: 1 unit Tensile force: 5000 kg at 3 m/min (3000 kg at 7 m/min) Pedpjdl Uzkofx Ab Ierd Broaching tool clamping: universal pull head for flat shanks Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by oil and chip tray) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (L x W x H): approx. 4600 mm x 600 mm x 1900 mm (without workstation) Power supply: 380 Volt / 50 Hz / 15 A Hydraulic motor: 4 kW Accessories / Special Equipment: • Equipped with a universal pull head for flat shanks • Coolant / lubricant system • Without automatic tool feeder • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for producing keyways. On request, broaching needles and broaching mandrels can be supplied. The machine is connected to power and available for demonstration in our warehouse.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson-ES8 From Training Workshop – Excellent Condition! Technical Data: • Year of Manufacture: approx. 1990 Machine No. 3768 • Centre Height: 120 mm • Centre Distance: 430 mm • Spindle Speeds: 60 – 3000 rpm in 18 gear steps • Spindle Bore: 23 mm • Short Taper Spindle Nose DIN 4 • Tailstock Taper: MK 2 • Feeds: from 0.03 to 0.15 mm/rev • Thread Types: Metric, Imperial, Module, and Diametral Pitch • Metric Thread Pitches: from 0.25 to 2.5 mm • Weight: approx. 360 kg • Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Equipment and Features: • 3-Axis Digital Readout by Easson ES8 • Collet chuck system 1–20 mm, 1 mm increments, incl. draw tube • 1 Three-jaw chuck with 2 sets of jaws • 1 Four-jaw chuck with 2 sets of jaws Prodpsvkfhpjfx Ab Iod • Multifix size A with 3 tool holders • Bed stop • Steady rest About the Machine: For sale is a Weiler Primus lead and feed screw lathe, built circa 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly, and the bedways are in very good condition. Even at high speeds, the Weiler runs quietly. The machine comes from a major company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect the machine on site under power and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Predpfx Abovivmyo Ijd Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: baru, Maszyna do wyważania wałów Cardana BVI-03-74 Dostępna od ręki w Polsce!!! Czas dostawy: jeden dzień!!! Maszyna przeznaczona do wyważania wałów napędowych o masie do 150 kg i długości do 4700 mm. Idealna dla małych warsztatów obsługujących szeroki zakres różnych wałów, w tym wałów samochodów ciężarowych. Ta wyważarka charakteryzuje się wysoką wydajnością i służy do wyważania wałów Cardana w samochodach osobowych i ciężarowych. Dzięki licznym rozwiązaniom technicznym proces wyważania wału napędowego jest prosty, a atrakcyjna cena urządzenia obniża koszty inwestycyjne, umożliwiając skuteczny rozwój działalności. DWA RAZY szybsza od Twojej maszyny. Ta wyważarka pozwala nie tylko na precyzyjne, ale także wyjątkowo szybkie wyważanie wału. Jeśli możesz skrócić czas wyważania 2–2,5-krotnie, zyskujesz realną przewagę konkurencyjną. WYSOKIEJ KLASY AKCESORIA Maszyna wyposażona jest w trzy główne typy adapterów: 1. Szybkozaciskowe uniwersalne adaptery. Mają dwie główne zalety: dzięki specjalnej konstrukcji kołnierz wału jest mocowany w 5 sekund – nie trzeba przykręcać śrub! WAŁ MOŻNA ZAMOCOWAĆ 4 RAZY SZYBCIEJ BEZ ŚRUB. Drugą zaletą są pierścienie centrujące, które można wykonać na zwykłej tokarce, dopasowując do większości spotykanych wałów. 2. Adaptery z kołnierzem KV. Umożliwiają wyważanie wałów z kołnierzem wielowypustowym. Pasują do czterech rozmiarów kołnierzy: 120, 150, 180, 205 mm. Najczęściej wykorzystywane przy wyważaniu wałów ciężarówek. 3. Adapter z otworami. Do montażu różnorodnych flansz z otworami – montaż wału jak w uniwersalnych adapterach, za pomocą pierścieni centrujących. GŁÓWNE CECHY • Wyważanie wałów Cardana 2-, 3- i 4-łożyskowych • Długość wału do 4700 mm, masa do 150 kg • Montaż wału Cardana w 1 minutę Pjdpfjpbv Tfsx Ab Isrd • Standardowy zestaw adapterów – montaż 80% wałów Cardana na rynku • Trzy metody mocowania łożyska środkowego • Maszyna typu miękkie łożyskowanie – wysoka czułość na drgania • Obsługa przez jednego operatora • Podpory z łożyskami ślizgowymi – szybka zmiana ustawienia, wygodna praca • Uchwyt zabezpieczający z klamrą do szybkiego montażu • Pomiar niewyważenia we wszystkich płaszczyznach jednocześnie • Kalibracja maszyny przez operatora • Wyświetlanie niewyważenia w czasie rzeczywistym • Możliwość tworzenia i drukowania raportów DANE TECHNICZNE Maksymalna masa wału Cardana: 150 kg Maksymalna średnica kołnierza: 300 mm Maksymalna długość wału: 4700 mm Liczba podpór maszyny: 4 Ilość jednocześnie mierzonych płaszczyzn: 2, 3, 4 Minimalna możliwa do uzyskania resztkowa niewyważka właściwa: 10 g mm/kg Zakres prędkości obrotowej wału: 1000–2000 obr./min Zasilanie: 380V, 3-fazowe, 50Hz Moc (min.): 2,2 kW Wymiary (długość x szerokość x wysokość): 6000 x 1100 x 1450 mm Masa: 700 kg Produkujemy pełną gamę urządzeń do wyważania i naprawy wałów napędowych. Zapraszamy do kontaktu – przygotujemy najlepszą ofertę!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Weiler Primus VC Precision Centre Lathe, 3-Axis Digital Readout K&C NEW with VC Drive, stepless speed control, and CE conformity – very good condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electric chip guard >> Machine feet >> Splash guard Prsdpfx Aew Idllob Isd About the machine: Offered is a Weiler Primus VC lead and feed screw lathe, year of manufacture 2003, in very good original condition. This is a very well-maintained lathe with VC drive and stepless spindle speed control. The digital readout and scales by K&C are brand new. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site to verify its condition.