Spindelpresse 40 ton

NEHER SPPG-40/100

Kondisi: bekas, Tahun pembuatan: 2007, PENGHANCUR POROS WEIMA POROS TUNGGAL MODEL WLK15 MOTOR UTAMA 90KW UKURAN PISAU ROTOR 50X50 (PISAU BARU) Dedpfxetqdxfs Aireuu PANJANG ROTOR 1500MM DIAMETER ROTOR 370MM MESIN 100% BERFUNGSI SIAP DIGUNAKAN

Kondisi: diremaj di bengkel (bekas), Maximum forming area: 960 x 660 mm Minimum forming area: 210 x 170 mm Maximum sheet size: 1000 x 700 mm Minimum sheet size: 310 x 210 mm Maximum sheet thickness (manual loading): 12 mm Maximum sheet thickness (automatic loading): 10 mm Maximum tool height: 490 mm Maximum draw depth: 300 mm (pos./neg.) Total connected load approx.: 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control system, Panel OP 37 - Air-conditioned control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators - Individual emitter control for top heater - Individual emitter control for bottom heater Dsdpfx Aijwf Dvaorsuu - Parallel clamping frame - Pneumatic motor locking for upper reducing frame - Cylinder locking for lower reducing frame - 4 cooling fans - Adjustable vacuum for undermount via cascade control - Adjustable pre-blow / demoulding via cascade control - Large front access for tool change - Sag control for film via photocell with support air - Automatic tool changing system Undermount: 1. Tool clamping via vacuum 2. Tool change via pneumatically actuated ball rollers Upper plunger: 1. Motorised remote adjustment for stroke limitation 2. Pneumatic quick-release tool clamping system Sheet feeding: - Automatic motorised lifting of the film transport chain - Pneumatic quick-release system for suction plates - Motorised centring of plastic sheets - Separate vacuum pump for textured material Optional retrofitting preheating: - Top heater moves pneumatically, overall field control, emitters can be switched on/off individually via toggle switch - Bottom heater moves pneumatically, overall field control, emitters can be switched on/off individually via toggle switch - Independent temperature control for top and bottom heater via separate controllers in the BE control cabinet (temperature not adjustable via UA operator panel) Optional retrofitting for roll feed: - Cross-cutter and infeed rollers at sheet feeder - Roller stand RO 800

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.525 mm, berat keseluruhan: 21.000 kg, beban meja: 160 kg, jumlah sumbu: 2, This AMADA EMZ 3610 NT was manufactured in 2008. It features a punching force of 300 kN, can process material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine has 45 turret stations with auto-index capability and achieves a punching rate of 1,000 strokes per minute. If you are looking for a high-quality punching machine, the AMADA EMZ 3610 NT we are offering for sale is a strong choice. Please contact us for further information. • Punching force: 300 kN Dedpfx Aiex Enlxjrjuu • Travel with repositioning (X/Y): 5,000 mm / 1,525 mm • Max. material thickness: 4.5 mm • Travel speed (X/Y): 100 m/min / 80 m/min • Axis speed: 128 m/min • Positioning accuracy: ±0.1 mm • Turret stations: 45 • Auto-index stations: 2x B / 2x C • Refurbished two years ago and serviced annually by Amada • Turret speed: 30 rpm • Stroke rate: 1,000 strokes/min OPTIONAL: Tools and premium spare parts available, see photos (original price €80,000)

Kondisi: bekas, Tahun pembuatan: 1988, translation-01 Dusdpfx Aievuuknjrou

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin DU 1500 x 1000 x 620 T7 No. 98 15254 Ukuran pelat: 1000 x 800 mm Kedalaman tarik: 620 mm Tahun pembuatan: 1998 Arus nominal: 238 A Daya terpasang: 164,5 kW Dujdpfx Aoxmgvcjireu Sistem kontrol: Siemens OP 37 Perlengkapan: • Mesin pengisi • 6 kipas pendingin • Punch atas • Kontrol kelenturan film • Bingkai penjepit yang dapat disesuaikan secara motorik • Flash emitter • Pirometer pemanas • Pirometer pendingin

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Gebrauchte Förderschnecke aus Edelstahl zu verkaufen. Diese Schnecke wurde zum Eintauchen von gewürfelten Kartoffeln in ein Konservierungsmittel vor dem Verpacken verwendet, ist jedoch nicht ausschließlich hierfür einsetzbar. Dedpfx Asvkximeireuu

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, Entrada (longitud): 2200 mm Entrada (anchura): 2000 mm Rotor (longitud): 2000 mm Rotor (diámetro): 495 mm Número de cuchillas: 56 (60x60) Velocidad del rotor: 125 rpm Potencia del motor principal: 132 kW Voltaje: 400 V Frecuencia: 50 Hz Peso de la máquina: 14.000 kg Duedpfx Aoi Elylsirou * Máquina especialmente diseñada para la trituración de plásticos. Los rodamientos del rotor están completamente aislados. * Máquina completamente reacondicionada; 1 año de garantía o 2.000 horas, lo que ocurra primero. * Incluye: - Puente rompedor (alimentador superior); ideal para la trituración de residuos voluminosos y de baja densidad - Soporte de acero - Tolva de alimentación - Cuadro de control eléctrico - Planos de implantación disponibles en formato CAD para máquina, tolva y soporte de acero - Manual de instrucciones y esquemas eléctricos - Rotor de repuesto Notas: - La maquinaría se suministra completamente reacondicionada - Garantía de 1 año o 2.000 horas, lo que antes ocurra - Manual de operación y mantenimiento incluidos --- If you need this translated into any specific language, let me know!

Kondisi: siap digunakan (bekas), de Duodpfx Ajxlknmoirou

Kondisi: baik (bekas), gaya penekanan: 50 t, panjang langkah: 320 mm, Capacity: 50 tons Throat depth: 225 mm Stroke rate: 320 strokes/min Table size: 500 x 800 mm Dusdpstt A T Tefx Airju Machine dimensions (LxWxH): 160 x 120 x 260 cm Machine weight: 6 tons

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Operating pressure: 6 bar, connected load: 26.92 kW, weight: 400 kg, supplied with documentation. Dsdelvu Ruopfx Airjuu