Pabrik palu

NEUE HERBOLD GMBH HM 1000/1600

Tahun pembuatan: 2024, Kondisi: baru, The JC 500 jaw crusher is ideally suited for crushing hard, brittle, and tough-hard samples such as ceramics, clinker, coke, construction materials, ferroalloys, glass, minerals, ores, precious metals, rocks, silicon, slag, and much more. Itodpfxjiamq Hs Aa Nsb

Tahun pembuatan: 2021, Kondisi: seperti baru (mesin pameran), Overband plate magnet Made of stainless steel 1.4301, fully welded construction including cleaning drawer Itsdpod Evl Djfx Aa Nsb Dimensions: 800 x 500 x 180 mm completely welded housing lifting eyes for suspension

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The copper wire granulator can recycle used copper wire into separated copper and plastic. The process capacity is 100–180 kg/h, and the dry mechanical crushing method produces no environmental pollution. For sale is the granulator, including a pre-shredder and a conveyor belt with magnet! Design and Manufacturing 99.99% outstanding efficiency and reliability, advanced technology: ● Airflow gravity separation system for extracting copper particles from insulation. ● High-performance vibration separator for gravity separation of copper granulate from insulation material. ● Self-cleaning dust collection system to reduce maintenance time and eliminate dust. ● The machine is compact and requires minimal space. ● 99.99% pure copper recovery rate ● High reliability ● High productivity ● Robust and versatile ● Long service life ● Cost-effective Technical specifications Model GRS 180KG Voltage 380V Power 8.7 kW Frequency Itsdpfx Asu Tq S Hja Neb 50 Hz Processing capacity 100-180 kg/h Dimensions 80*137*204CM Net weight 518 kg

Tahun pembuatan: 2019, Kondisi: seperti baru (mesin pameran), Aluminum flat conveyor belt including support frame. Dimensions: 6000 + 620 x 105 mm Conveyor belt width: 500 mm Itedpfx Aaed Ra Uao Nsb PVC conveyor belt with cleats, sidewalls, and sealing strip included. Feed hopper (stainless steel V2A) at the beginning of the conveyor belt. * Optional with magnetic deflection roller at the end of the conveyor belt. * Optional available as an incline conveyor. * Custom-made versions available in all configurations.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Isdpfovwlqqsx Aa Notb Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Tahun pembuatan: 1986, Kondisi: baik (bekas), nomor mesin/kendaraan: 2057, Hosokawa Alpine ZPS 315 Classifier Mill Universally applicable for materials up to a Mohs hardness of approx. 3.5, designed for requirements involving extremely fine end products with the lowest possible energy consumption. Classifier mill for fine particle sizes, cool grinding, and flexible production parameters in the particle size range from less than 5 µm up to 200 µm. Impact beater mill with an integrated Turboplex classifier in the upper section for precise particle size limitation. Welded construction, grinding tools made of special steel. Iodpfjqi Hhpjx Aa Netb The mill will be sold complete with accessories such as: intake filter, rotary airlocks, cyclone, filter, fan, piping, and control cabinet.

Tahun pembuatan: 2006, jam operasional: 15.000 h, Kondisi: baik (bekas), For sale is an Erema 1007T Year of manufacture: 2006 Operating hours: 15,420 Throughput capacity: 250-350 kg/h Currently, the system is processing HDPE, but it is also suitable for other plastics such as LDPE... The machine can be inspected during operation. A new extruder screw was installed in February. Itjdjumubyopfx Aa Njb

Kondisi: baru, Tahun pembuatan: 2025, RLA 400 VIBER Output 11,300 m³/h Capacity approx. 11,300 m³/h Motor power 11 kW / 15 HP Speed 3,000 rpm Suction velocity 32 m/s Extraction outlet diameter 355 mm Filter material: polyester Filter permeability: 5 micron Filter size: 160 x 935 mm Number of filters: 58 Chip bin size: 500 x 500 x 600 mm – 3 pcs Itsdpfx Aaelkd Tfj Nob Voltage: 380V Dimensions: 1000 x 3000 x 2300 mm Weight: 630 kg Noise level: 85 dB (disconnected) / 70 dB (connected) + €850 for models with fire extinguisher (Safe System) + €1,350 for models with inverter (speed control)

Tahun pembuatan: 2003, Kondisi: bekas, Bollegraf Hammermühle AS 75/850 Bouwjaar: 2003 Vermogen: Itjdpfeg T Id Nsx Aa Njb Geschiktheid: Invoersectie: Rotor- Rotorbreedte: 850 mm Prijs: 24.500 euro Contactpersoon: de heer Rainer Eckerle

Kondisi: baru, de Itedpfx Aaoikvrto Nsb