Bekas gergaji bingkai pemotongan tipis
NEVA ORBIT Plus

Name: NEVA ORBIT Plus
Brand: NEVA
Availability: InStock

Tahun pembuatan

2008

Kondisi

Bekas

Lokasi

Republik Ceko

Bekas gergaji bingkai pemotongan tipis NEVA ORBIT Plus

Tampilkan peta

Data mesin

Nama mesin:: Bekas gergaji bingkai pemotongan tipis

Pabrikan:: NEVA

Model:: ORBIT Plus

Nomor mesin:: 2008 / 576

Tahun pembuatan:: 2008

Kondisi:: bekas

Fungsi:: berfungsi sepenuhnya

Harga & Lokasi

Lokasi:: Husova 537, 378 21 Kardašova Řečice, Česká republika

Hubungi

Rincian teknis

Ketinggian potong (maks.):: 250 mm

Lebar pemotongan (maks.):: 150 mm

Penggerak gergaji:: 15.000 W

Daya:: 15 kW (20,39 hp)

Masa garansi:: 6 bulan

Rincian penawaran

ID iklan:: A20425600

Pembaruan:: terakhir pada 31.10.2025

Deskripsi

Die NEVA-Garantie umfasst Plug-&-Play-Ausstattung:
Hsdpfx Agoxtm Ras Rjpa
- Materialführung nach Wahl: Führungskanäle, Mittel- oder Seitenführung
- 2 Rahmeneinheiten, 2 Sägeblatt-Sets und 2 Distanzhülsen-Sets
- Montagegestell und Zubehör – Drehmomentschlüssel, Werkzeugsatz etc.
- Komplettüberholung der Maschine vor Auslieferung ab Werk

Die ORBIT Plus Dünnschnitt-Gattersäge wurde zur Herstellung von verleimbaren Lamellen aus Massivholzblöcken mit minimalem Schnittfugenverlust entwickelt. Die Dünnschnitt-Gattersäge ORBIT verwendet ein einzigartiges Auf-/Abbewegungsverfahren zum Schneiden von Furnierlamellen. Im Gegensatz zu herkömmlichen Gattersägen, die sich nur linear auf und ab bewegen, nutzt die ORBIT Dünnschnitt-Gattersäge einen patentierten Ausschwenk-Mechanismus am unteren Totpunkt des Sägehubs.

Einsatzbereiche: Parkett- und Mehrschichtboden, Türen, Fenster, Treppen, Möbel, Musikinstrumente, Stifte, Sportgeräte (Ski, Snowboards, Eishockeyschläger), Holzverpackungen für Obst und Gemüse etc.

Die einzigartige Bewegung der Dünnschnitt-Gattersäge ORBIT bietet gegenüber älteren, konventionellen Gattersägen mehrere entscheidende Vorteile. Bei konventionellen Gattersägen entsteht durch verdichteten Sägestaub, der sich um die Sägezähne sammelt und nicht ausgeräumt werden kann, erhebliche Hitzeentwicklung. Dies ist besonders beim Schneiden größerer Höhen kritisch, da die mittleren Sägezähne nie komplett aus dem Schnitt austreten und so der Spanabtransport behindert wird. Da der ORBIT-Sägerahmen beim Hub aus dem Schnitt ausschwenkt, können Holzspäne und Sägestaub ungehindert abfallen. Das Resultat: Geringere Wärmeentwicklung an den Sägeblättern, längere Standzeit der Sägeblätter, staubfreie Lamellen, Einsatz von dünneren Sägeblättern und vor allem eine gesteigerte Produktivität der ORBIT-Gattersäge.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2025

3 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+420 384 ... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

DunnschnittMinigattersäge dengan kepala perencana NEVA TR88 Orbit Plus

Kežmarok

10.339 km

DunnschnittMinigattersäge dengan kepala perencana
NEVATR88 Orbit Plus

€24.000

harga tetap ditambah PPN

Hubungi

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), I am selling the thin-cutting mini band saw NEVA TR88 Orbit Plus, year of manufacture 2005. Hodjiuc Scopfx Ag Repa Configuration with planing heads above and below, 1.5 + 1.5 kW, also suitable for later production of glulam lamellas. Main motor: 15 kW Working height: 270 mm Digital working height adjustment via ELGO electric positioner Digital feed speed adjustment via MKS Total weight: 2800 kg Includes a large amount of accessories, saw blades, and adjustment components with setup device. Condition: very good, fully operational. Made in the Czech Republic.

Lihat detail

Iklan kecil

Barbing

10.937 km

Mesin cuci kaca
SchiavoPlus 1600.4

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Schiavo Top 1600.4 Hpodpsvxf Uxsfx Ag Rea Vertical Glass Washing Machine with Pre-Wash Zone, Main Wash Zone, and Drying Zone Wet zone predominantly constructed from stainless steel and moisture-resistant materials. 120 mm one-piece washing brushes with stainless steel core Including water tanks for water treatment Including fans for glass drying Discharge zone equipped with inspection lamps Processing dimensions: Max. glass height: 1600 mm Glass thickness: 3–19 mm Number of brushes: 4 Connected load: 11 kW

Lihat detail

Iklan kecil

Berlin

10.804 km

Mesin cetak
CEFLAPIXART 16/4/UV

Hubungi

Iklan kecil

Gergaji pita pemotong tipis Wintersteiger DSG SONIC

Wysoka

10.545 km

Gergaji pita pemotong tipis
WintersteigerDSG SONIC

Hubungi

Tahun pembuatan: 2009, jam operasional: 214 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, DSG Sonic Thin-cut Frame Saw – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical Data: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of saw frame strokes: approx. 550/min Cutting heights for different saw lengths: Saw length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) Hpedpfow Dp Ufox Ag Roa Saw length 420 mm → cutting height: 30–128 mm, 45–128 mm Saw length 500 mm → cutting height: 80–210 mm, 45–210 mm Saw length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For basic machine: +185 mm With magazine: 250–1700 mm With double planer: +250 mm Block height variation: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Other technical data: Cutting width with central fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss during cutting (kerf thickness): from 0.9 mm Saw blade lifespan (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): For the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator’s workplace: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction system and air: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Supply terminal cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Lihat detail

Iklan kecil

Pusat permesinan CNC BIESSE Rover C 6.50 CONF.2

Polandia

10.415 km

Pusat permesinan CNC
BIESSERover C 6.50 CONF.2

Hubungi

Kondisi: bekas, Tahun pembuatan: 2006, 3195 CNC Machining Center BIESSE Rover C 6.50 CONF.2 Used, year of manufacture 2006 Machine already dismantled According to our customer, the machine is fully functional The machine is capable of processing various workpieces simultaneously Working area X: 4850/4600 mm Working area Y: 1535 mm Power rating: 228 kW, 39 A Required footprint approx. 8100 x 6500 mm (LxW) Total weight approx. 6800 kg Hpedpfx Agevn R A Ho Rea Sale on behalf of customer, ex site Poland, without dismantling, transport, or installation included Errors in description and price excepted Dismantling, loading and transport by us available as an option To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended Sale is made as-is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, terms apply: “purchased as seen” Photos and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Lihat detail

Iklan kecil

MESIN PENGIKAT KOMPRESI HIDRA FAMAD PACZKÓW HSKG 6050

Kłodawa

10.673 km

MESIN PENGIKAT KOMPRESI HIDRA
FAMAD PACZKÓWHSKG 6050

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, HYDRAULIC PRESS FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements Hpjdpfotrl R Ajx Ag Roa The HSKG device is designed for high-pressure gluing of wooden components cut in thickness, using hydraulic cylinders. The compression force range per cylinder is 5-11 kN (horizontal) and 25-55 kN (vertical). Gluing takes place in a stack within the loading field dimensions. The stack is formed by hydraulic pressing between movable vertical beams and vertical slats of the cross cylinders. Both stack-forming elements are equipped with wooden or metal inserts matching the profile of the slat stack. Edge-gluing of wooden elements improves frame quality, reduces machining costs, and decreases wood waste. Technical and operational data (standard HSKG – 6m version): Number of loading fields: 4 pcs Dimensions of a single loading field: - loading height: 1,140 mm - slat length per field: 1,530 mm Maximum slat width: 150 mm Maximum length of glued elements: 3,120 mm Installed power: 3 kW Power supply: 3/N/PE, 400V 50Hz Control voltage: 24 V DC Number of cylinders per field: - Ø 50x100 – 3 pcs - Ø 80x100 – 3 pcs External dimensions (L x W x H): 8,120 x 1,000 x 2,300 mm Machine weight: 4,800 kg Upon customer request, we also manufacture alternative clamping cylinder control configurations depending on the envisaged length of the glued elements, as well as different lengths and numbers of individual working fields per press set, and a maximum working width of up to 220 mm with increased pressing force.

Lihat detail

Iklan kecil

Pengering veneer dengan penyortiran Plymac

Åsby

10.545 km

Pengering veneer dengan penyortiran
Plymac

Hubungi

Iklan kecil

Bandsaw horisontal pemotongan tipis Rhino Sawyer 300XL-Tilt

Drachten

11.270 km

Bandsaw horisontal pemotongan tipis
Rhino Sawyer300XL-Tilt

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Horizontal thin-cut bandsaw 300 mm working width 22.0 kW saw motor New 2025 model with larger wheels – adjustable tilt up to 12 degrees Touchscreen and PLC from Schneider Larger wheels for higher cutting speed Hsdpfoxc Ea Sex Ag Rspa Frequency inverter on the wheels for adjustable cutting speed Suitable for lamellae from 2 mm

Lihat detail

Iklan kecil

Konveyor, Derek Overhead, Derek Jig SWF Gantry Crane 70 ton + 5 ton x 25 meter

Deinze

11.500 km

Konveyor, Derek Overhead, Derek Jig
SWFGantry Crane 70 ton + 5 ton x 25 meter

Hubungi

Kondisi: siap digunakan (bekas), berat kosong: 115.000 kg, tinggi angkat: 18.000 mm, Portal crane with SWF hoist: 70-ton main lift and 5-ton auxiliary lift Hoist type: SWF NF28A4XEP66DT1S All motions frequency-controlled 30-metre hoisting cable Wheelbase: 25 metres 4 powered 8-wheel bogies Crane travel speed: 6 m/min Hoisting speed: 6 m/min Hoisting speed (auxiliary): 6 m/min Duty classification: A Hoisting classification: A Total weight: 115 tonnes Type: portal crane Hpedpsxpkh Ujfx Ag Rea Capacity: 70 + 5 tonnes Span: 25 metres Hoisting speed: 6 m/min Rotation speed: 6 m/min Travel speed: 6 m/min

Lihat detail

Iklan kecil