Pemisah Densimetri Nihot SDS 1000

Nihot SDS 1000

Kondisi: baru, Data teknis: - Bukaan hopper: 1850 x 1250 mm - Volume hopper: sekitar 3,0 m3 - Diameter rotor: 500 mm - Panjang rotor: 650 mm - Kecepatan putaran rotor: 80 rpm - Kontrol SPS - Motor – gearbox: 18,5 kW - Panel kontrol (sudah terhubung sepenuhnya) termasuk kabel 5 m - Start bintang-segitiga otomatis - Berat: 3600 kg - Kapasitas tergantung pada jenis material Gjdpfewb Sdqjx Acyeip Aplikasi utama dan material yang dapat diproses: Daur ulang dan pengurangan volume logam non-ferro Daur ulang dan pengurangan volume limbah kayu Daur ulang dan pengurangan volume plastik dan busa / styrofoam Daur ulang dan pengurangan volume kabel listrik dan gulungan Daur ulang dan pengurangan volume wadah plastik dan material komposit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, IMMEDIATELY AVAILABLE, Häcker chamber filter press with base frame and 50 m³/h Abel pump for sale, plate size 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake thickness, capacity approx. 2700 liters, automatic plate shifting, open filtrate discharge into dual filtration channel, press is ready for operation immediately after installation, Abel pump was serviced by the manufacturer shortly before decommissioning, galvanized base frame with staircase, located near Würzburg. Giedpfx Aerunu Iecyop

Tahun pembuatan: 2026, Kondisi: baru, Mobile cleaning centrifuge including buffer tank for wastewater, agitator, and double diaphragm compressed air pump. - New machine - Numerous other versions and special configurations available on request. Machine type: Process water centrifuge, solid-liquid separation Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: Vibratory finishing, general solid-liquid separation, coolant treatment, wet blasting systems, ... Advantages: - High discharge capacity thanks to acceleration forces of more than 1800 times gravity acting within the unit - Closed-loop process water system minimizes operating costs and protects the environment - Saves costly additives for the vibratory finishing process (compound) - Economical and efficient separation of solid particles from mixtures - Suitable for process fluids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Looking for innovative solutions for surface finishing and process water treatment? We offer a wide range of systems for vibratory finishing, drying, and process water technology tailored to your application. From development to production: we provide all our products from a single source and everything is "Made in Germany." ----- Simply contact us—we are happy to provide you with non-binding advice. ----- The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations take place via telecommunication (email, fax, telephone, messaging portal), during which we will first send you a non-binding quotation. At this stage, we will inform you of our general terms and conditions and the right of withdrawal including our imprint, before any purchase/contract is concluded. Gjdpfxef Sqfqo Acyjip

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm Gjdpfxohzbips Acyeip RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Tahun pembuatan: 2022, Kondisi: baru, Aluminum angled conveyor with substructure Conveyor length: 1000mm horizontal + 2400mm inclined Incline angle at bend: 45° Discharge height: approx. 2000mm Height of horizontal section: 300mm top edge PPU transport belt, FDA food compliant Conveyor belt EM 15/2 0+17 PU blue 7 white Belt width: 400mm T20 cleats welded on, spacing 202mm * Antistatic thanks to conductive threads in the running side fabric Endless welded with stepped finger splice 30mm high corrugated sidewalls on both sides, high-frequency welded * Edge-free zone on both sides for belt guidance on the incline Cross arrangement: -70/+35/-5/+190/-5/+30/-70mm Full-surface support plate Drive: Motor approx. 0.25kW Belt speed approx. 0.3m/sec Connection 220/400V, 50Hz, protection class IP54 Our core competency lies in delivering exactly what the customer truly needs. Gisdpeht U Tdjfx Acyep We work with our customers to develop tailor-made, individual solutions and supply the corresponding systems from our own production. Please feel free to contact us by phone as well to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems.

Kondisi: bekas, Tahun pembuatan: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, thus featuring a reinforced gearbox and reinforced cutting frame. — Features / Scope of delivery: - 1 set armored shafts HW 8/10 with combs and re-breaking bar, suitable for scrap and waste - 1 set used shafts HW 8/10 with combs and re-breaking bar, likewise for scrap and waste - DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Godpfx Acex Nkhqoyeip Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 hp) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked, hydraulically driven Areas of application: scrap, commercial waste, bulky waste, mixed waste, wood, recycling materials — Condition: - Well-maintained machine - Fully functional - Sale as inspected on site Additional Information / Service History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally according to the manufacturer's specifications and documented. Notes: • Sale is made excluding any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information is provided without guarantee. The seller assumes no liability for possible errors, incompleteness or changes to the information provided. Sale is made exclusively subject to prior sale.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 693068, berat keseluruhan: 7.300 kg, daya: 30 kW (40,79 hp), Walter Helitronic Vision CNC Werkzeug- und Schleifmaschine mit Palettenlader Universelle Werkzeug- und Schleifmaschine (CNC-gesteuert) Gedpfx Acjuqzdpeysip Hersteller: Walter, Modell: Helitronic Vision, Seriennummer: 693068, Baujahr: 2008 Beschreibung: Geeignet zur Herstellung und Nachschärfung von Metall- und Holzbearbeitungswerkzeugen aller Art. Die Maschine kann unter Strom besichtigt werden. Technische Daten: • Längsbewegung (X-Achse): 480 mm • Vertikalbewegung (Y-Achse): 320 mm • Querbewegung (Z-Achse): 700 mm • Drehtisch Schwenkbereich (C-Achse): +/- 200° • Werkstückaufnahme: ISO 50 • Max. Werkstückdurchmesser: 320 mm • Werkstücklänge Umfangsschleifen: 370 mm • Werkstücklänge Stirnschleifen: 320 mm • Genauigkeit, lineare Auflösung: 0,0001 mm • Radiale Auflösung: 0,0001° • Spindeldurchmesser: 100 mm • Schleifscheibenaufnahme: HSK50 • Schleifscheibendurchmesser: 200 mm • Schleifspindeldrehzahl: 0 – 12.000 U/min • Spitzenleistung: 30 kW • Anschlussleistung: 35 kW (460 V / 60 Hz) • Gewicht ca.: 7.100 kg • Abmessungen (L x B x H): 3.649 x 2.490 x 2.301 mm Zubehör: • Haltevorrichtung zum Öffnen der Schleifscheibe (nicht enthalten, wie auf Fotos abgebildet) • Stufenlose Drehzahlregelung, Messtaster, pneumatische Werkstückspannung • Elektrostatischer Nebelabscheider • Feuerlöschanlage • Ölauffangwanne, 2 Schleifscheibenflansche, kompletter Satz Handbücher • Turmoil Drive Chiller • Paletten für Lader: 8 Stück – 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1-1/4” • 10 Stück HSK-Schleifscheibenaufnahmen Software: • Windows XP Pro Svc Pack 3 • Tool Studio V3.3 • Der Computer wurde aufgerüstet und ist sehr schnell beim Rendern der Werkzeuge in Tool Studio Zustand: • Hervorragender Zustand, sehr präzise und konstant. Oktober 2023: Y-Achse komplett überholt (Linearmotor, Führungen, Kompensationszylinder, Festo-Booster-Pumpe durch United Grinding erneuert). • Es wurde ein 1 Mikron-Filtersystem verwendet (nicht enthalten), daher extrem sauber gehalten • Verladung auf einen Tieflader für den Versand für 1.200 $ möglich. Gerne erstellen wir Ihnen auch ein Angebot für den Versand oder die Seekistenverpackung.

Kondisi: bekas, Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Gisdpfjbq Stqex Acysp Rotor fly circle: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting blades mounted on tool holders Screen design: solid screen basket, reinforced with ribs Screen hole diameter: 15 mm Counter-blade: with adjustable cutting gap Machine weight: approx. 5,900 kg

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), Two complete injection molding production lines are available, each with a Husky injection molding machine, five complete molds, an all-metal separator, Motan gravimetric blending system, and crane system. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s–12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s–15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s–11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s–14s. 6) 48-cavity H-PET-AE mold. Total system dimensions (L/W/H): approx. 24m / 13m / 5.5m. Includes drying unit, mold dehumidification, color dosing equipment, and T-conveyor belt. Documentation available. On-site inspection is possible. Gedew Az Riopfx Acyjip

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, For optimal recovery of non-ferrous metals or material purification Gedpfx Aevdqdiscysip This extremely powerful machine is primarily used for processing household waste, shredding materials, household appliances, wood, plastics, glass, IBA (incinerator bottom ash), bed ash, and electronic waste. The IMRO non-ferrous metal separator meets the requirements of very high recovery quotas and high purity levels.