Pusat pembubutan dan penggilingan CNC

Niles-Simmons N30/2500 MC

Kondisi: bekas, Tahun pembuatan: 2007, Turning length: 2,500 mm Control: Sinumerik 840 D Spindle head: A 11 Number of tools: 48 Swing diameter over saddle: 750 mm Swing diameter over bed: 780 mm C-axis: 0.1–30 rpm Quill diameter: 160 mm Hnodpfjwwaruox Aanel Internal taper: MK 5 Maximum tool length: 500 mm Maximum tool weight: 15 kg Machine weight: approx. 27 t Space requirement: approx. 8.4 x 4.0 x 2.5 m Technical specifications: Nominal turning length: 2,500 mm Swing diameter over saddle: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head according to DIN 55026: A 11 Spindle bore (through): 123 mm Front bearing diameter: 200 mm Oriented spindle stop: 0–359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10–2,500 rpm Number of speed ranges: 2 Speed range I: 10–775 rpm Speed range II: 20–2,500 rpm Max. torque at 60 % duty cycle: 2,083 Nm (up to 186 rpm)

Kondisi: bekas, en_001_TechnicalDetails_2024-06-18 Hnodpovr S Ulofx Aanol

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Grinding area: 2000 x 900 mm, cross travel: 875 mm, longitudinal travel: 2450 mm, distance from table to spindle centre: 845 mm, magnetic chuck dimensions: 2000 x 800 mm, max. table load: 2.3 t, longitudinal feed: 1,000–30,000 mm/min, cross feed: 0.01–2,000 mm/min, vertical feed: 0.001–1,500 mm/min, grinding wheel dimensions: 500 x 100 x 203.2 mm, grinding spindle motor power: 22 kW, length: 6,800 mm, width: 3,450 mm, weight: 13 t. Inspection on site is possible. Hjdpfx Aouyk N Isanonl

Kondisi: bekas, Tahun pembuatan: 1969, Translation of technical listing for export platforms: Hnjdpfx Aet Hw N Hsanel Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: -- mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Required space approx.: -- m D I S K U S Vertical double-sided surface grinding machine in C-frame design with rotary workpiece feed system Model: DDS 600 CRA Year of manufacture: 1969 Serial No.: 6672 _____ Grinding wheel diameter x bore (each): 600 x 150 mm Grinding wheel width approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Workpiece: Max. grinding height x width: approx. 60 x 120 mm Vertical quill adjustment (each): approx. 150 mm Hydraulic infeed impulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Feed rate for rotary device, steplessly adjustable: 14 – 145 mm/s Grinding wheel speed (each): (24 m/s) / 765 rpm Grinding spindle drive (each): 22 kW Total drive: approx. 50 kW / 380 V / 50 Hz Total weight: approx. 7,000 kg Accessories / Special Features • Rotary workpiece fixture for round transport discs with equipment slots for part placement and automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height, including (if needed) automatic hydraulic grinding wheel advance • Stepless speed regulation of rotary feed device dependent on grinding requirement and workpiece dimensions • Manual infeed of grinding wheels via push buttons • Hydraulically swiveling dressing device (RA) between the two wheels for simultaneous dressing of both grinding wheels, with appropriate compensation and automatic repositioning to effective workpiece thickness after dressing = significant time savings; can be activated manually or via timer • Ammeters for both grinding spindle drives • Central lubrication • Mechanical workpiece height control with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, large separate belt filter system, various grinding wheels, several transport wheels, etc. This machine is particularly suited to simultaneous, parallel-surface grinding of workpieces in large-scale production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – ready for demonstration shortly Delivery: ex-stock, as inspected Payment: strictly net, after receipt of invoice.

Kondisi: baru, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will provide you with an attractive offer including installation and service. ISGEC has delivered to over 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to hearing from you. Hsdpfx Aof Rt Iroanenl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 35.044 h, kecepatan spindel (maks.): 10.000 rpm, tinggi total: 3.000 mm, lebar total: 2.500 mm, berat keseluruhan: 11.000 kg, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: SIEMENS, model controller: 840D, daya motor spindle: 16.800 W, panjang produk (maks.): 2.500 mm, beban meja: 500 kg, berat alat: 8.000 g, jumlah slot dalam magazin alat: 82, jumlah sumbu: 5, This 5-axis universal machining centre, HERMLE C40U Dynamic, was manufactured in 2011. It features travel paths of 850 mm on the X-axis, 700 mm on the Y-axis, and 500 mm on the Z-axis. The machine offers a maximum spindle speed of 10,000 rpm and has a tool magazine with 38 positions plus an additional 43-tool extension. If you are looking for high-performance machining solutions, you should consider the HERMLE C40U Dynamic machine we have for sale. Please contact us for further details. • Utilisation: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Output at 40%: 1,500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1,500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tools/Magazines: • Number of magazines/turrets: 2 • Magazine capacity: 38 positions • Additional magazine: +43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll cooling system • Renishaw OMP 40 probe • Through-spindle coolant (IKZ) • Laser beam monitoring • Chip conveyor • Taper size SK 40 • Operating voltage: 400 V/3~ • Mains frequency: 50 Hz • Control voltage: 24 V- • Total rated current: 60 A • Total power: 41 kVA Additional equipment • OPTIONAL at extra cost: Tool package available (approx. 530 tools) • OPTIONAL at extra cost: Zero-point clamping system Hnjdpsy Al Ufefx Aanjl The machine was serviced by HERMLE in 2025. In August 2025, the spindle head was replaced and the geometry was re-checked and adjusted by a HERMLE technician. Technical Specification Taper Size: SK 40

Kondisi: bekas, Tahun pembuatan: 1984, X-travel 2500 mm y-travel 750 mm z-travel 1000 mm Table clamping surface 2550 x 800 mm Spindle taper SK 50 Control system HEIDENHAIN, TNC 150 B Hodpfetqqnwex Aanjnl Machine weight approx. 16 t

Kondisi: baik (bekas), Tahun pembuatan: 2012, Bagian yang ditunjukkan dengan tangan tidak termasuk. Detail teknis ditampilkan pada gambar. Hnedpfx Asyw Naujansl

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 42L09420, de-Hankook Protec 9NC x 5000 CNC-Drehmaschine mit Fanuc 32i Steuerung und großem Spindeldurchlass. MASCHINENAUFBAU & AUSSTATTUNG - Schweres, einteiliges Gussbett - Gehärtete und geschliffene Präzisionsführungen - 2-stufige manuelle Gangschaltung - Massiver Reitstock TECHNISCHE DATEN Max. Umlauf über Bett Ø 950 mm Max. Umlauf über Support Ø 630 mm Futterdurchmesser Ø 32'' Spitzenweite 5000 mm Werkstückgewicht zwischen Spitzen 5000 kg SPINDEL Drehzahlbereich: 2 – 630 min⁻¹ Spindelbohrung: Ø 254 mm Spindelaufnahme: A2-15'' Schaltbereich: Manuell, 2-stufig Reitstockkonus: MK 6 SCHLITTEN Revolverkopf: Automatisch, V8 Werkzeuggröße: 32 x 32 mm X-Achsenweg: 535 mm Z-Achsenweg: 4845 mm Eilgang X-Achse: 4 m/min Eilgang Z-Achse: 6 m/min REITSTOCK Pinolendurchmesser: Ø 180 mm Konusaufnahme: MK 6 Max. Pinolenhub: 250 mm BETT Breite: 630 mm Hnodpfx Aajwcq Tmonel Länge: 6715 mm MOTOREN Hauptspindel: 30/37 kW Vorschub X: 1,8 kW Vorschub Z: 4,2 kW STROMVERSORGUNG Anschluss: 415 V, 3 Phasen, 50 Hz ABMESSUNGEN & GEWICHT Länge: 7470 mm Breite: 2205 mm Höhe: 1890 mm Gewicht: 10.280 kg STANDARD-AUSSTATTUNG • Fanuc 32i-A CNC-Steuerung • Reitstockkonus MK 6 • 4-Backen-Futter, unabhängig • Automatischer Spindelstufenschalter • Eingebaute Mitlaufspitze • Kühlsystem • 2-Gang-Reitstockspindel • Arbeitsleuchte • Hauptmotor & elektrische Ausstattung • Zentrierspitze • Futterabdeckung Sonderzubehör/Ausstattung: - Vollverkleidung hinten (5000 mm Spitzenweite) - 4-Backen-Futter & Flansch Ø 32'' (Bohrung Ø 254 mm) - Lünetten (Rollenbacken) Ø 250–450 mm & Ø 450–650 mm - Mitlaufende Zentrierspitze MK 6 - Automatischer Werkzeugrevolver V8 (elektrisch) als Ersatz für manuelle Ausführung H-4 - 3 Außendrehhalter - 3 Bohrstangenhalter Ø 63 mm - 2 Planhalter - Bohrstangenvorrichtung Ø 150 mm (Stange exkl.) - Späneförderer 5000 mm - Transformator gemäß CE - Spindelmotor-Upgrade 30/37 kW Fanuc Option A (inklusive folgender Funktionen): - Spindelorientierung - Dynamische Grafikdarstellung - Kontinuierliches Gewindeschneiden - Custom Macro B - Erweiterte Programmbearbeitung - Tape Memory 320M - Inch/Metric-Umschaltung - Manual Guide i - Programmwiedergabe - Programmierbare Dateneingabe - Betriebsstunden- & Teilezähler - Werkzeugkorrekturen (32 Paar) - Variabler Gewindetrieb - Grafikfunktionen - Spindelpositionierung - Programm-Neustart - Externe Dateneingabe

Kondisi: baik (bekas), Tahun pembuatan: 2008, - Maximum turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Machine weight approx.: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full-stroke cylinder for partial hollow clamping, maximum draw tube bore Ø 100 mm - In-process measuring system Renishaw for X/Y/C axis - Programmable CNC tailstock on W axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis with travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° - ICS / Internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for the use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° - Hobbing software for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit Hnodpfjxmirgox Aansl - Chip conveyor - Documentation - CE marking