Material clamp, material gripper, load clamp, carrying clamp, lifting clamp, block tongs, crane grip

NORDGREIF 7548

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: STARRAG HECKERT, Model: HEC 400D, Year: 2008, Control System: Siemens Sinumerik 840D, Travels (X/Y/Z): 650 x 650 x 650 mm, Double pallet changer, Pallet size: 400 x 400 mm, NC rotary table 360° x 0.001°, 80-position tool changer, Tool holder: HSK 63, Max. speed: 15,000 rpm, Internal coolant supply (IKZ) 50 bar, Coolant temperature control, Belt filter, Chip conveyor, Spindle cooling, Prepared for infrared measuring probe, Operating hours: 56,194; Spindle hours: 9,196 Itedpjuav Igofx Akpoh

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 780 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 560 mm, berat benda kerja (maks.): 4.000 kg, jumlah slot dalam magazin alat: 120, produsen pengendali: Heidenhain, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 6.000 mm, berat keseluruhan: 12.000 kg, panjang meja: 630 mm, lebar meja: 500 mm, model controller: iTNC530, daya nominal (semu): 61 kVA, pergerakan cepat sumbu Z: 50 m/menit, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, kecepatan spindel (maks.): 18.000 rpm, kecepatan spindel (min.): 20 rpm, beban meja: 4.000 kg, jam operasional spindle: 19.500 h, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned machining, geometrically within new machine tolerances. The machine can be measured/inspected on site upon request. Machine Data: Itodjrxrkljpfx Akpsh Machine designation: Machining center with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: Good Equipment: • Direct path measurement in X/Y/Z (glass scales) • Chip conveyor • High-pressure coolant system, 40 bar • Extraction unit • NC rotary table • Tool magazine with 120 stations • Heidenhain touch probe • Rotating viewing window • High-pressure coolant (IKZ) 40 bar • Signal lamp • Chip flushing • Operating mode 4 Technical Data: Number of axes: 5-axis CNC control: Heidenhain iTNC530 NC rotary table clamping surface: 500mm x 630mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travel paths and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rate and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor Spindle: Max. speed: 18,000 rpm Interface: HSK A63 Tool Changer: Automatic tool changer: Yes Number of magazine stations: 120 Pallet Changer: 5 pallets

Tahun pembuatan: 2001, Kondisi: bekas, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We are offering a 25,000-litre storage tank for the storage of water and wastewater as follows: Itodpfx Akec Nkyzepoh The tank is a 30 cbm (cubic metres) steel storage tank. Material: S235JRG2 steel. Includes manufacturer’s certificate according to DIN standards and type plate. The tank has been cleaned internally and externally insulated with bitumen. Suitable for both underground and above-ground storage. Tank dimensions: Length: approx. 8,390 mm Diameter: approx. 2,000 mm Weight: approx. 4,500 kg Shape: cylindrical Fittings: according to customer requirements For use as a fire water storage tank, we can additionally supply a suction line with A-type fixed coupling (to DIN standard). Of course, you can also design your tank system together with us! All our installations are thoroughly inspected and checked by selected staff in our company. We can also offer cost-effective delivery on request. You are welcome to inspect our installations at any time. Further tanks for above-ground and underground storage are available in all sizes and can be viewed at our premises. Have we convinced you with our offer? If you have any questions or requests, simply give us a call – one of our experienced employees will be happy to advise you. General information: All offers are ex works Warstein, loaded free of charge. Delivery can be offered at low cost for an additional charge. Delivery time: immediately. You will receive an invoice with VAT shown separately. We also purchase existing tank installations and, as a certified specialist company according to the Water Resources Act (WHG), we can professionally empty, clean, dismantle, and remove these systems. Best regards from Warstein, Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Tahun pembuatan: 2026, Kondisi: baru, 1 brand new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surplus MREC 15 – MOBILE VERSION Manufacturer: RSM Model: MREC 15 Itsdpfx Asfgrfiokpoh Year: Brand new Washing capacity approx. 15 m³/h WAM washing screw Separation cut: 0.3 mm - 1 unit loading hopper - 1 unit elevated tank (25 m³) - 1 unit buffer tank (2 m³) - 1 unit agitator for wastewater with console - 2 submersible sludge pumps - 1 submersible pump - 1 control unit for residual concrete recycling plant - 1 spray arch - etc. Final coating: RAL 9002 Separator galvanized. Price = list price Send us your inquiry and we will gladly provide you with a customized offer (of course including all possible discounts). Delivery time: available at short notice Offers and prices are strictly net ex works Subject to prior sale, Errors and/or misrepresentations excepted.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1997, 2 unit Crane Overhead Figee 35 ton dengan kait putar, bentang sekitar 18,60 m dan 1 unit sekitar 21 meter, tinggi angkat 10 meter. Itedpfxsw S D Izs Akpsh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 19.681 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, tegangan masuk: 6.300 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, bahan bakar: gas rumah tangga H, berat keseluruhan: 23.000 kg, jenis pendinginan: air, frekuensi input: 50 Hz, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, es Itedpfx Asytgxfskpoh

Tahun pembuatan: 2007, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12428 B500-851, bridge crane ± 14,170 mm x 25,000 kg Itjdpev Ip Afsfx Akpjh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jam operasional: 15 h, kapasitas angkut: 2.500 kg, tinggi angkat: 5.850 mm, jenis bahan bakar: listrik, tipe tiang: telescopik, tinggi konstruksi: 1.920 mm, daya: 40 kW (54,38 hp), panjang garpu: 1.200 mm, berat kosong: 4.755 kg, panjang total: 3.894 mm, jenis penggerak: Elektro, lebar konstruksi: 1.813 mm, Rigid telehandler Load centre: 500 mm Mast type: Telescopic Ijdpfoyzuxwex Akpeth Transmission: Hydrostatic Speed class: 20 km/h Condition: New equipment Technical condition: New Front tyres type: Non-marking Front tyres condition: 80 - 100% Rear tyres type: Non-marking Rear tyres condition: 80 - 100% Battery voltage: 100 V Battery capacity: 348 Ah Battery manufacturer: Manitou Battery type: Lithium-ion Battery year: 2026 Battery condition: 80 - 100% Description: Manitou telehandler 625 – 100% electric. The first 100% electric Manitou telehandler, specifically designed for construction applications! A compact, versatile machine for all your material handling needs, offering quiet operation and zero emissions with no compromise on performance. With a lifting height of 5.85 m, a load capacity of 2.5 t, a ground clearance of 33 cm, combined hydraulic movements, and compact dimensions, the MT 625 e is a true all-terrain unit – ideal for tight, emission-sensitive jobsites such as city centres or indoor projects. Equipped with lithium-ion batteries and an integrated charger, you can add an extra battery and charger to increase on-site autonomy and speed up charging times. Includes: 3rd hydraulic valve, rear work light, front work light, heater, full cab, air conditioning.

Kondisi: bekas, Flame Heating Device Roland Groß + Söhne GmbH Ring burner for preheating weld seams, castings, etc. Type 1 x 1" Ionisation Serial no.: ALMA Year of manufacture: 03/20 Connection voltage: 230 Volt Max. gas pressure: 500 mbar Max. air pressure: 10 bar Max. gas flow rate: 30 Nm3/h Max. air flow rate: 300 Nm3/h Includes 10 assorted flame ring nozzles - Flame monitoring system Hans Henning - Hinged ring nozzle made from two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, frontal gas outlets - Hinged ring nozzle made from two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central gas outlets - Hinged ring nozzle made from two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central gas outlets - Hinged ring nozzle made from two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, frontal gas outlets - Hinged ring nozzle made from two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central gas outlets - Hinged ring nozzle made from two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central gas outlets - Hinged ring nozzle made from two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, frontal gas outlets - Hinged ring nozzle made from two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central gas outlets - Hinged ring nozzle made from two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, frontal gas outlets - Hinged ring nozzle made from two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central gas outlets - Hinged ring nozzle made from two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central gas outlets - Hinged ring nozzle made from two half-shells, curved length 1500 mm, with hose quick-connect coupling and ignition device, central gas outlets For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welding and fabrication of welded fine-grain steel components. Itjdpfx Ajdz Spwekpoh Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Gas heating for thermal coating.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 32.524 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, tegangan masuk: 6.300 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, bahan bakar: gas rumah tangga H, jenis bahan bakar: gas, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, PLANTA DE GENERACIÓN DE GAS – JENBACHER J616 GS J11 (Paquete Completo) Se trata de una planta de generación de energía completa, que incluye sistema de refrigeración, bombas, sistema de lubricación, sistema eléctrico y sistema de escape. Horas totales de funcionamiento (desde nuevo): 32.524 h Iodjytg Rbepfx Akpsth Mantenimiento: completamente mantenida por INNIO Horas desde el mantenimiento mayor a las 30.000 h: 2.524 h Servicios mayores realizados (20.000 h y 30.000 h): completamente efectuados. En el servicio de las 30.000 h se reemplazaron por piezas nuevas los siguientes componentes: turbocompresores, pistones, bielas, camisas de cilindro, segmentos de pistón, así como cojinetes de bancada y de biela. Datos técnicos Potencia eléctrica: 2.745 kW Año de fabricación: 2016 Combustible: Gas natural Velocidad: 1.500 rpm Frecuencia: 50 Hz Alternador: Leroy-Somer Tensión: 6.300 V Alcance del suministro (incluido) Grupo electrógeno Jenbacher Armarios auxiliares de control DIA.NE XT4 Rampas de gas Sistema de refrigeración (bombas de alta y baja temperatura) Caldera de recuperación de fluido térmico Silenciador Cuadros de protección Transformador 6,3 kV / 15 kV, 3.500 kVA (incluido) Documentación Disponibilidad: Inmediata