CNC Schrägbett-Drehmaschine

Oerlikon Boehringer VDF 250 C-U

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 independent - Bar capacity: 32 mm Todpfx Aeuhauysdcjd - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - CNC control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip evacuation system: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Kondisi: bekas, Tahun pembuatan: 2007, Turning length: 2,500 mm Control: Sinumerik 840 D Spindle head: A 11 Number of tools: 48 Swing diameter over saddle: 750 mm Swing diameter over bed: 780 mm Tedpswwaruofx Adcsd C-axis: 0.1–30 rpm Quill diameter: 160 mm Internal taper: MK 5 Maximum tool length: 500 mm Maximum tool weight: 15 kg Machine weight: approx. 27 t Space requirement: approx. 8.4 x 4.0 x 2.5 m Technical specifications: Nominal turning length: 2,500 mm Swing diameter over saddle: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head according to DIN 55026: A 11 Spindle bore (through): 123 mm Front bearing diameter: 200 mm Oriented spindle stop: 0–359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10–2,500 rpm Number of speed ranges: 2 Speed range I: 10–775 rpm Speed range II: 20–2,500 rpm Max. torque at 60 % duty cycle: 2,083 Nm (up to 186 rpm)

Kondisi: baik (bekas), Tahun pembuatan: 2001, Maschine ist in gutem Zustand. Die gezeigten Einzelteile werden nicht mitgeliefert. Schneidwerkzeuge sind nicht im Lieferumfang enthalten. Tsdpsrpk Rmefx Adcjd

Kondisi: sangat baik (bekas), For sale: Rafamet underfloor wheel lathe, Polish-made. The machine is fully operational and in good condition, following electrical and control system modernization carried out by Rafamet. The machine was in active use until dismantling and is now ready for loading. Technical Specifications: - Track gauge (standard version): 1,435 mm - Track gauge (special version): 1,524 or 1,676 mm - Wheel diameter: 800–1,500 mm - Minimum distance between wheelsets: 1,500 mm - Maximum wheelset clamping force: 25 tons - Drive roller speed (stepless): 15–82 rpm - Drive roller peripheral speed: 7.5–43 mm/min - Copying carriage feed (stepless): 0.95–34 mm/min - External lifting device travel: 540 mm/min - Internal lifting device travel: 410 mm/min Todpfemidwcsx Adcsd - Carriage travel: 2,300 mm/min - Sliding rail travel: 9,000 mm/min - Weight with standard accessories: 25,200 kg - Installed power: 83 kW (after modernization: 58 kW)

Tahun pembuatan: 2000, Kondisi: baik (bekas), Teile, die von Hand gezeigt werden, sind nicht enthalten. Länge: 1350 mm, Durchmesser: 480 mm, Tsdpfx Aopy Eqmedced

Kondisi: baik (bekas), jarak pergerakan sumbu X: 12.000 mm, jarak lintasan sumbu Y: 7.300 mm, jarak gerak sumbu Z: 3.000 mm, panjang total: 30.000 mm, panjang meja: 12.000 mm, lebar meja: 4.730 mm, lebar total: 12.000 mm, tinggi total: 10.475 mm, beban meja: 250.000 kg, berat keseluruhan: 400.000 kg, Portal Milling Machine WALDRICH SIEGEN - PF-F-150 Make: Waldrich-Siegen Model: PF-F-150(1)-530/400 Travel (X-axis): 12,000 mm Travel (Y-axis): 7,300 mm Travel (Z-axis): 3,000 mm Travel (W-axis): 4,000 mm Distance between columns: 5,000 mm Table width: 4,730 mm Table length: 12,000 mm Table load capacity: 19 t/m – approx. 250 t total Table feed rate: 10,000 mm/min W-axis feed rate: 3,000 mm/min T-axis feed rate: 6,000 mm/min Transversely adjustable milling head Vertically adjustable crossbeam Horizontal hydrostatic ram Milling spindle Ø: 560 mm Tool holder: ISO 60 C-axis feed rate: 5,000 mm/min Milling motor: 90 kW Spindle speed: 2,500 rpm Z-axis travel: 3,000 mm Todpfxoytrxkj Adcsd Z-axis feed rate: 2,000 mm/min Küma angular head WF2 – 90 kW – 450 rpm Küma universal milling head UB1D – 60 kW – 2,400 rpm Küma fixed head GB1D – 90 kW – 2,400 rpm Küma angular head WF1 Power supply: 3 × 400 V / 50 Hz Power requirement: 600 kVA / 630 Amp Coolant system: 4,000 liters – Coolant through the spindle 20 / 40 bar Machine overhauled in 2004 by Schiess Bed – Table group: - Renewal of slideways - Regrinding of guideways - Renewal of table drive - Direct linear measuring system - Hydrostatic guideways Gantry and crossbeam: - Modification of adjustment spindle - Trapezoidal spindle replaced by ball screw - Direct linear measuring system - New drive motors to increase feed speed of milling axes - New milling ram with hydrostatic guides Electrical system: - Complete new control cabinet - Complete new wiring - Siemens Sinumerik 840D control – 6 axes Equipment: - Completely new Raumag-Janich protective covers - Completely new double chip conveyor - Large tooling package - Extensive clamping devices Machine under power in Europe Available immediately Controlled axes: X / Y / Z / W / C / B Overall height: 10,475 mm Overall width: 11,934 mm Overall length: 30,000 mm Total weight: approx. 400,000 kg Completely overhauled in 2004 for EUR 2,200,000! This CNC portal milling machine from Waldrich was used in the energy sector for machining steam turbine housings. Please note: The information on this page has been prepared by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend that you verify all important details.

Kondisi: bekas, technical-specs-001 Tjdpfx Adoyhrlyecsd

Kondisi: baik (bekas), lubang spindel: 360 mm, jarak pergerakan sumbu X: 798 mm, jarak gerak sumbu Z: 358 mm, daya motor spindle: 45.000 W, kecepatan rotasi (maks.): 500 rpm, tinggi total: 2.100 mm, panjang total: 8.100 mm, lebar total: 2.750 mm, berat keseluruhan: 13.000 kg, Diameter putar maks.: 665 mm Sumbu X: 798 mm Sumbu Z: 358 mm Lubang spindle: 360 mm Kecepatan putar: 500 rpm Tedpfx Aswxb Ersdcod Daya spindle: 45 kW Mounting pinole: 6 Mk Langkah pinole: 230 mm Diameter pinole: 150 mm Panjang: 8.100 mm Lebar: 275 mm Tinggi: 2.100 mm Berat: 13.000 kg Perhatikan: Informasi di halaman ini diperoleh berdasarkan pengetahuan kami yang terbaik dan, sejauh mungkin, dari produsen. Informasi ini diberikan dengan itikad baik, namun tidak dapat dijamin keakuratannya. Oleh karena itu, informasi ini tidak mewakili pernyataan atau ketentuan kontrak. Kami menyarankan Anda untuk memeriksa semua detail penting.

Kondisi: bekas, Tahun pembuatan: 1987, Translation of technical machinery sales description: x-axis travel 400 mm y-axis travel 250 mm Workpiece height 485 mm Control ELESTA CNC 314 Total power requirement 10 kW Machine weight approx. 4000 kg Space required approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Model S 3 – CNC 314 Year of manufacture 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Longitudinal table travel max. (X) 400 mm Cross table travel max. (Y) 250 mm Vertical adjustment of grinding carriage max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head stroke, hydraulic 15 - 7,500 mm/min Mounting height table/grinding spindle min./max. -75 / +485 mm Grinding spindle overhang 350 mm Taper grinding max. 16° Grinding diameter, borehole max. approx. 230 mm 18 spindle speeds, depending on spindle motor, continuously variable 4,500-80,000 rpm Planetary rotation speed (C), continuously variable 5-250 rpm U-axis, radial feed 6 mm Total drive approx. 10 kW – 380 V – 50 Hz Machine weight approx. 4,000 kg Accessories / Special equipment: • CNC path control Type CNC 314 (ELESTA-POSELESTA II) with monitor, for 4 axes (=X, Y, C + U-axis), with interpolation in 2.5 dimensions (X, Y, C). The U-axis is a feed axis and not capable of interpolation. Teach-in programming directly on the machine, with various sub-programs, as well as manual axis movements from the control panel or with an electronic handwheel. Separate digital display for the Z-axis • U-axis as manual and controlled radial feed axis, on the grinding head, Tjdpfxst Hw Txj Adcjd with digital display of feed rate, • 2 grinding motors #5674 and #3980 for spindle speeds up to 80,000 rpm, • Built-in acoustic grinding contact indicator KSV 5 • HI-Cut system (oil cooling) and automatic fire protection system • Separate coolant unit with band filter, separate hydraulics and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories available at present. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock here – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1990, en_001 Tedet Hxcnspfx Adcod