CNC Drehmaschine C Achse Okuma LB 3000EX

Okuma LB 3000 EX-II

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, panjang pembubutan: 565 mm, lubang spindel: 80 mm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 565 mm, daya motor spindle: 22.000 W, kecepatan rotasi (maks.): 6.000 rpm, tinggi total: 1.824 mm, panjang total: 2.800 mm, lebar total: 1.790 mm, CNC lathe with C axis Okuma - LB3000EX-II MACH-ID 9471 Manufacturer: Okuma Model: LB3000EX-II Fjdpsywurpefx Aaqopg Control: OSP-P300LA Year of manufacture: 2018 Tool package with tool holders Axially driven tool holders Radially driven tool holders Kitagawa B210 3-jaw power chuck Max. turning diameter: 580 mm X-axis travel: 260 mm Z-axis travel: 565 mm Spindle bore: 80 mm Spindle speed: 5000 rpm Spindle power: 22 kW Tool changer: 12 positions Driven tool speed: 6000 rpm Chip conveyor: Yes Tool eye: Yes Operating hours: 4566 h Quill taper: 5 MT Length: 2800 mm Width: 1790 mm Height: 1824 mm Weight: 4350 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We advise you to verify all important details.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 10.311 h, de_1 Fpsdpfx Aaox D I Tqjqeg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Mesin Bubut CNC Okuma LB 3000 EX II-MYW 800 Fpodpfx Aoyk Tbhsaqsg Kontrol: OSP-300LA Tahun pembuatan: 2019 No. Mesin Internal: 20 Jarak antara center atau hidung spindel: 1085 mm Diameter ayun di atas carriage/rangka: 340 / 580 mm Perjalanan sumbu X: 260 mm Perjalanan sumbu Y: 115 mm Perjalanan sumbu Z: 1.010 mm Perjalanan sumbu C: 360 mm Perjalanan sumbu W: 895 mm Kecepatan spindle utama: 45 - 5.000 rpm Kecepatan spindle lawan: 45 - 6.000 rpm Tipe holder: BMT 60 Turret alat: V12 (berpenggerak) Perlengkapan: Konveyor serbuk One touch IGF Touchsetter Spindle utama Hainbuch Ø 65 mm Spindle lawan SMW Autoblok KNCS-N 170-43 Sistem pendingin HMF-980 dengan filter pita kertas Persiapan feeder batang / antarmuka robot

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, CNC Mesin Bubut Okuma LB 3000 EX II Kontrol: OSP-P300LA Fpedpfsylhmuex Aaqjg Tahun pembuatan: 2018 No. Mesin Internal: 19 Panjang pembubutan: 500 mm Diameter pembubutan: 340 mm Diameter ayunan di atas tempat tidur: 530 mm Kecepatan putar: 45 – 5.000 rpm Turret alat: 12 posisi (berpenggerak) Pemegang alat: BMT 65 Lubang spindle: Ø 72 mm Perlengkapan: Konveyor serbuk Penangkap bagian Touchsetter Spindle tambahan dapat diprogram One Touch IGF Chuck self-centering 3 rahang Kitagawa berbagai alat penggerak dan statis

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Misinvestment by a corporation. The machine is brand new and unused (already delivered). There are no lead times—immediately available. A truly rare opportunity. Machine type Horizontal Machining Center with Pallet Changer Series NHX 8000 Control Siemens S840Dsl with CELOS Measuring System Fully Closed Scale Feedback (X/Y/Z) Machine Concept DCG Travel X/Y/Z 1,400 / 1,200 / 1,350 mm Rapid Traverse X/Y/Z 50,000 mm/min Pallet System Pallet Changer, Turn-Type Number of Pallets 2 Pallet Size 800 × 800 mm Pallet Load 2,200 kg [optional 3,000 kg] Max. Workpiece Ø/H 1,450 mm / 1,450 mm Pallet Change Time 16 s B-Axis Direct Drive Minimum Indexing 0.001° Fpsdpfx Aaoxizdajqjg Max. Speed 100 rpm Spindle powerMASTER Speed 16,000 rpm Power 85/50 kW (10% DC / Continuous) Torque 549/279 Nm Mounting HSK-A100 Cooling Centralized Spindle Cooling Internal Cooling optional CTS 7 MPa Tool Magazine Chain Magazine with 60 Stations [optional 100/120] Rack Magazine Options 180 / 240 / 330 Stations Max. Tool Diameter with Adjacent 110 mm Max. Tool Diameter without Adjacent 320 mm [if >10,000 rpm: 230 mm] Max. Tool Length 800 mm Max. Tool Weight 30 kg Tool-to-Tool 1.9 s Cut-to-Cut 5.0 s Equipment / Options Workpiece Probe Tool Measurement System Laser Monitoring optional High-Pressure Coolant 7 MPa optional Chip Conveyor Full Enclosure with Roof Dimensions n.a. Weight n.a. Connection Data n.a.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Mesin bubut CNC Okuma LB 3000 EX II-M C1000 Kontrol: OSP-300L Tahun pembuatan: 2013 Nomor mesin internal: 18 Panjang pembubutan: 1.000 mm Diameter pembubutan: 340 mm Diameter ayun di atas alas: 580 mm Kecepatan putar: 45 – 5.000 rpm Revolver alat: 12 posisi (berpenggerak) Fjdpfeylh Sdjx Aaqspg Pemegang alat: VDI 40 Perlengkapan: Konveyor serpihan Touchsetter OneTouch IGF Tailstock NC Chuck penjepit kuat 3-jaw Forkardt 3QLC/K250

Kondisi: bekas, Tahun pembuatan: 2014, OKUMA - LB3000 EXII - 2014 - Steuerung: OSP-P300L CNC mit 15" Farb-Touchscreen - Betriebsstunden: 65.458 h - Stand: 18.03.2026, NC-Betriebszeit: 36.054 h - Spindellaufzeit: 19.533 h - Schnittzeit: 16.582 h - Leistungsaufnahme: 33,1 kVA Technische Daten: - max. Umlaufdurchmesser: 480 mm - max. bearbeitbarer Durchmesser: 340 mm - max. Drehlänge: 785 mm - Spannmittel: Spannzange + 10“ Hydraulikfutter B210-A06-01, 3x weiche Backen (Schunk KM-WBL 103) - 1x harte Backen (Schunk SHB-J 100) - hydraulische Durchgangszylinder SS 1770, Zugrohr Hauptspindel: - Spindel mit JIS A2-6 End, Bohrungsdurchmesser 80 mm, integrierter Motor - Drehzahlbereich: 45 - 5.000 U/min - Leistung: 22 kW / 15 kW - Stufenlos gesteuerte C-Achse, 360° mit 0,001° Schritten Gegenspindel: - Drehzahlbereich: 50 - 6.000 U/min - Leistung: 11 kW / 7,5 kW - Spindel mit Enddurchmesser 140 mm, Bohrungsdurchmesser 62 mm, integrierter Motor - Stufenlos gesteuerte C-Achse, 360° mit 0,001° Schritten - Spannzange + 6“ Hydraulikfutter B206-01, 3x Sätze weiche Backen (Schunk KM-WBL 62) - hydraulische Durchgangszylinder SS1243, Zugrohr - Verfahrweg der Gegenspindel - NC-Achse W: Hub für W450: 595 mm - federbelasteter Werkstückauswerfer von der Gegenspindel - Überlastüberwachung der W-Achse (Antriebsmoment) - Zentrierspitzenklemmung (Reitstockfunktion) in der Gegenspindel Fpjdpfeyzkn Ujx Aaqeg Revolverkopf: - Werkzeugplätze: 12, fest und angetrieben BMT60 (nicht VDI) - Innenaufnahme Werkzeug: 25 x 25 mm - Außenaufnahme Werkzeug: Ø 40 mm Angetriebene Werkzeuge: - Antriebsleistung: 7,1 / 4,1 kW - Drehzahlbereich: 45 – 6.000 U/min Verfahrgeschwindigkeiten: - Eilgang X-/Z-Achse: 25/30 m/min - Eilgang C-Achse: 200 U/min Verfahrwege: - X-Achse: 260 mm - Z-Achse: 510 mm - Y-Achse: 115 mm (+70 mm / -45 mm) Maschinendaten: - Breite: 3.330 mm (ohne Lademagazin und Band) - Tiefe: 1.800 mm - Höhe: 2.250 mm - Maschinengewicht: 5.250 kg Zubehör: OSP-P300L Advanced One Touch CF-M-E Set beinhaltet: - Koordinatentransformation - Profilerstellung - Advanced One Touch IGF - 3D-Bearbeitungssimulation - Überwachung Maschinenlaufzeit - Lastüberwachung (Spindel, Vorschubachsen) - NC-Betriebsüberwachung (inkl. Stückzähler) - Zykluszeitreduzierungsfunktion - Hi-Cut Pro Funktion - Spindeldrehzahlregelung - Hochdruckkühlung, max. 20 bar, bis zu 50l/min - ILS Stangenzuführung Typ MUK 7012, mit Stangenmagazin 6-70 mm/1.250 mm, Bj. 05/2014, Hersteller: Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn - FILTERMIST FX4002 Absaugung Maschinenzubehör: - Spannzangenaufnahme: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (derzeit auf Hauptspindel) - Spannzangen Durchm. (mm): 6-33, 34-36, 38-42, 44-46, 48, 50-51, 53, 55, 57, 60, 64-65 - Spannzange mit Nut Durchm. (mm): 55-60-65 - Spannzangenaufnahme: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (derzeit auf Gegenspindel) - Spannzangen Durchm. (mm): 6-28, 30-32, 34-36, 39-41 Halter: - Axialhalter – 5x - Messerhalter – 5x - Halter am Messer – 2x - vordere Doppelschneider – 3x - Querschneider – 3x - Reduzierhülsen (vom Meter gefertigt) - Reduzierung – Silon Durchm. (mm): 12-14-15,5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Available: 2 units! Condition must be assessed. It is possible to purchase the order pickers with a set of brand new batteries including a 2-year warranty for 3,500 euros, or for 3,000 euros with used batteries. Fpsdpfxovday Hj Aaqsg Year of manufacture: 2017 Load capacity: 215 kg Lift height: 3000 mm Travel speed: 8 km/h Overall length: 1528 mm Battery voltage: 24V Model: EKM-202 Negotiable for larger quantities, big discounts available! The agile and versatile EKM order picker is ideal for use in retail environments, for light maintenance tasks, or for order picking without pallets. A sturdy mast allows items to be lifted up to the third shelf level – making it the best alternative to a conventional ladder. Automatically closing doors ensure operator safety even at high lift heights. A sensor mat on the floor increases mobility within the operator cabin, allowing the operator to choose any position on the standing platform. The generously sized workspace provides the operator with more comfort when driving and standing sideways. Good visibility in the direction of travel is ensured. Ergonomically positioned controls enable simultaneous lifting and steering, making operation with the EKM highly efficient.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 410 mm, panjang pembubutan: 515 mm, diameter pembubutan: 520 mm, lubang spindel: 66 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 250 mm, jarak gerak sumbu Z: 565 mm, berat keseluruhan: 4.400 kg, One-Touch IGF (memiliki fitur pemrograman dialog tanya-jawab) Model 2024 OKUMA LB3000EXII CNC LATHE Kontrol: OSP-P300LA Katalog telah kami lampirkan, silakan diperiksa. 2 Sumbu Diameter putar: 520 mm Diameter pengerjaan: 410 mm Panjang pengerjaan: 515 mm Fpodeywhfispfx Aaqeg Diameter lubang spindle utama: 66 mm Konde tailstock: MT-5 Tailstock terprogram 5000 rpm Berat: 4400 kg Referensi tersedia di Jerman dan Prancis.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, kecepatan spindel (maks.): 5.000 rpm, jarak lintasan sumbu Y: 120 mm, daya motor spindle: 22.000 W, jumlah sumbu: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine is equipped with a motorized turret with 12 positions and a Y-axis travel of 120 mm. If you are looking for a high-quality lathe, you should consider the Okuma LB 3000 EXII horizontal lathe we have for sale. Contact us for further details. • Control: OSP P 300LA • Spindle: ASA 6" nose (bore 80 mm, without drawbar); bar capacity 52 mm (Kitagawa SR1453 cylinder); electric spindle orientation • Axes: Y-axis travel 120 mm; C-axis rotation 360° (0.001° increment) • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW • Tailstock: MT5; 500 kgf thrust; live center • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min Fpjdpsyq Ngmjfx Aaqjg • Tool presetting: Manual • Programming: Plain language IGF dialog

Kondisi: bekas, de-to-it-lt-lv-t1 Fpjdpfeu E U Ufox Aaqsg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 115 mm, berat keseluruhan: 6.850 kg, produsen pengendali: OKUMA, model controller: OSP-P300LA, jumlah sumbu: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022 and is distinguished by its robust horizontal turning capabilities. It is equipped with an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and speeds of up to 6,000 rpm, it ensures efficient turning operations. If you are looking for a high-quality lathe, you should consider the Okuma LB 3000 EX II, which we have available for sale. Please contact us for further information. • Distance between spindle noses: 1,085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Counter spindle bore: 63 mm • Bar capacity through counter spindle draw tube: 52 mm • Driven tool speed: 45-6,000 rpm Additional equipment: • Iemca KID 80/16 Plus bar feeder (2022) – incl. KID 80 • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws Fsdox D Rvnepfx Aaqjpg • 4 straight driven tool holders • 4 angled driven tool holders • 2 double rotary tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER tool holders with approx. 30 ER collets

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 2.044 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 223697, panjang pembubutan: 950 mm, diameter pembubutan: 340 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 120 mm, jarak gerak sumbu Z: 1.010 mm, kecepatan rotasi (maks.): 5.000 rpm, Machine with Big-Bore Spindle TECHNICAL DETAILS Spindle speed: 45 to 4,200 rpm Spindle motor: 30/22 kW Spindle mount: JIS A2-8 Spindle bore: ø91 mm Axes and Travel Turning length: 950 mm Turning diameter: 340 mm Fpedpfxownqdio Aaqog C-axis control: 360° with 0.001° increments X-axis travel: 260 mm Y-axis travel: 120 mm; +70 mm / −50 mm Z-axis travel: 1,010 mm Tool Turret Turret type: V12, radial, for L- and M-type tools Tool holder interface: VDI Speed: 45 to 6,000 rpm Rotating tool motor: VAC 7.1/4.1 kW Control CNC control: OSP-P300LA with 15" touchscreen Pitch error compensation: X-/Y-/Z-axes Workpiece eject detection: available Smart Interface: included API Library 2: enabled Virus Protection System - OSP-VPS: included Software Functions One Touch IGF Advanced M-E Kit: standard Optional IGF Advanced M-D Kit: included Multitasking coordinate conversion: available Profile generation: available Cycle time inspection and reduction: available Hi-Cut Pro: available Load monitoring, spindle & feed axes: available NC operation monitoring: available Spindle speed control: variable Y-axis turning: available Helical milling for MY machine: X/Y-surface, Y/Z-surface Cooling and Lubrication Coolant pump: 0.25 kW Coolant tank: L-type, replacing I-type High-pressure coolant pump: 0.8 kW Lubrication monitoring: A-1 incl. hydraulic pressure monitoring Dimensions and Configuration CE marking and EMC: included IEC standard compliance: included Power supply CE-compliant: adapted to local standards Bed extension for steady rests: included TAS-C: included Chip and Coolant Management Chip tray: side discharge H-type chip conveyor: side, CE-compliant Fully enclosed with coolant protection: included MACHINE DETAILS Height: 2,444 mm Footprint: 3,420 x 2,041 mm Weight: 6,600 kg

Kondisi: bekas, Tahun pembuatan: 2008, x-travel 410 mm y-travel 570 mm z-travel 140 mm Control Mazatrol Matrix Maximum machining diameter: 545 mm Maximum machining length: 519 mm Main spindle speed: 35 - 6,000 rpm Tool holder: Capto C6 Rapid traverse X/Y/Z axes: 30/26/33 m/min Performance/Capacity: Max. swivel range: 545 mm Max. turning diameter: 545 mm Max. bar capacity (through spindle): 51 mm Max. machining length: 519 mm Max. workpiece weight: - Chuck work: 150 kg - Bar work: 200 kg Main Spindle: Spindle speed: 35-6,000 rpm Spindle bore diameter: 61 mm Max. torque: 161 Nm Tailstock: Fpodpeyt R Idsfx Aaqeg Rapid traverse: 8 m/min Travel range (engaged/retracted): 434/281 mm Milling Head: Type: Single spindle with ATC (Automatic Tool Changer) Tool holder type: Capto C6 Tool dimensions: - External turning tool: 20 mm - Internal turning tool: 32 mm - Milling tool: max. 90 mm diameter x 200 mm length Milling spindle speed: 15-12,000 rpm Equipment/Accessories: - Chip conveyor - Mist extraction system - Tools - Documentation

Tahun pembuatan: 2018, jam operasional: 1.256 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2189, OKUMA LB3000EX-II – Particularly well-suited for universal turned parts and the complete machining of complex workpieces. Thanks to generously dimensioned flat bedways and high-torque drives, this machine ensures high precision and long-term accuracy. TECHNICAL DETAILS Swing diameter over bed: 580 mm Fpedpfx Asnt T Auoaqog Machinable turning diameter: 340 mm Workpiece length: 950 mm Travel range X / Z / Y: 230 / 510 / 120 (+70/-50) mm C-axis: 360° / 0.001° Control: OKUMA OSP-P300LA Rapid traverse X / Z / Y: 25 / 30 / 12.5 m/min Tailstock stroke: 1015 mm Spindle speed: 4,200 rpm Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing diameter: 140 mm Tool turret: M-V12 with 12 stations Tool size: 25 x 25 mm Tool diameter: 40 mm Tool change time: 0.1 s Tool speed: 45 – 6,000 rpm Operating hours: 1,256 h Control on: 1,660 h MACHINE DETAILS Dimensions L x W x H: 3,420 x 2,041 x 2,444 mm Weight: 6,600 kg Connected voltage: 400 V, 3 phases, 50 Hz Apparent power: 38.9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH gear hobbing toolholder (see attached document) is not included in the scope of supply.