Mesin CNC bubut

Okuma LB2000 EX-MC

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 83 mm, panjang pembubutan: 1.000 mm, diameter pembubutan: 570 mm, diameter pembubutan di atas carriage atas: 340 mm, diameter quill: 80 mm, jarak gerak quill: 200 mm, berat keseluruhan: 3.200 kg, diameter luar chuck: 250 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The machine is in very good condition. Gksdswxw S Ijpfx Ag Rjf Available immediately! It can be tested under power.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Mazatrol SMOOTH CNC control Max. swing diameter: 695 mm Max. machining diameter: 340 mm Max. bar diameter: 35 mm Turning length: 600 mm Spindle speeds: 6,000 rpm Gedpfx Agewlu Ndo Rskf Sub spindle 12-position turret with driven tools Chip conveyor FMB bar feeder SL 80V

Tahun pembuatan: 1990, Kondisi: bekas, Pressure: 75 t Outreach: 300 mm Stroke: 8 - 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram area: 430 x 230 mm Pass-through opening in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Gsdpfx Aed Nl E Usg Rokf Distance table/ram with stroke up, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, featuring new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for mounting tool change consoles - 2 roller rails in the table - mechanical overload in ram (rupture plate) The following work will be carried out on the machine / partial overhaul: - Machine will be completely disassembled, checked, seals replaced, defective parts exchanged, etc. - Machine will be newly painted - new Balluff cam switch mechanism - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - current UVV (accident prevention regulation) inspection with brake time measurement

Kondisi: bekas, Tahun pembuatan: 2016, Travel path - X 800 mm Travel path - Y 450 mm Godpfx Ajwq S Alog Rjkf Travel path - Z 510 mm Control: HEIDENHAIN TNC620 Table size (L x W): 1,000 x 450 mm Number of tool changer stations: 30 Vertical machining center | DOOSAN DNM 4500 equipped with a 30-position tool changer, internal coolant supply (IKZ), and chip conveyor. The machine has only 5,365 spindle hours. The machine is in well-maintained condition. We are happy to share a machine video at the factory location upon request. Technical data for the machine will follow shortly. ----- #Tags: DNM4500 | DNM-4500

Kondisi: diremajakan ulang (bekas), Maximum pressing force: 180 kN (18 tons). Strokes per minute: 100 to 600. Gkjdpfxsfmavxe Ag Rjf Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Required air pressure: 8 bar. More high-speed presses in stock by Bruderer (models BSTA 18, 20, 30, 200, 50), as well as Schaal and Mabu presses.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Takisawa TMM 250 3 turning-milling center, year 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Maximum spindle speed: 4000 rpm 9 axes Gksdpfx Agjrt Ip Ne Rsf 2 x spindles 2 x C-axes Swing diameter: 780 mm Maximum turning diameter: 350 mm Maximum turning length: 1,300 mm Left chuck diameter: 250 mm Right chuck diameter: 200 mm Upper tool carrier with Y-axis (260 mm) and B-axis (230° / ±115°) Complete with 30-position tool changer Lower tool turret with 15 driven positions – all stations powered Fully simultaneous 5-axis machining with turning/milling capability Tool changer with 30 tool stations Workpiece magazine positioned on the right side of the machine, portal handling Driven tools on the turret C-axis on left and right spindle Chip conveyor Internal coolant supply through the milling spindle, 20 bar Due to administrative reasons (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Tahun pembuatan: 1984, Kondisi: baik (bekas), Bihler RM 40 (1984) - Multislide-Stanz-, Biege- und Umformautomat Die Maschine ist mit fünf Schlitten abgebildet, ein sechster ist jedoch verfügbar. Mehrere Abwickler für Band- oder Drahtzuführung sind vorhanden. Die Maschine verfügt über eine 8-Tonnen-Presse sowie fünf bzw. sechs Schlitten – hydraulische Spannung für Draht oder Band. Eine Maschine ist mit einem zusätzlichen Zuführsystem an der Rückseite ausgestattet, das durch das Mittelloch geführt wird. Gjdpjh T Ulyefx Ag Rjkf

Kondisi: bekas, Max. turning diameter: 360 mm Turning length: 505 mm Control system: Mazatrol SmoothC Max. swing diameter over bed: 660 mm Max. swing diameter over cross slide: 255 mm Max. bar diameter: 80 mm Spindle speed range: 35 - 4000 rpm Spindle torque: 358 Nm X-axis travel: 225 mm Rapid traverse X-axis: 30 m/min Z-axis travel: 605 mm Rapid traverse Z-axis: 33 m/min Spindle nose: A2-8'' Spindle bore: 91 mm Spindle passage: 80 mm Milling spindle speed (driven tools): 5000 rpm Max. torque at milling spindle: 47 Nm Drive power - milling spindle: 5.5 kW (40% duty cycle) Tailstock quill taper: MT 5 Tailstock travel: 565 mm Max. axial pressure: 5.0 Nm Turret: 1 Number of tool stations: 12 (driven) Turning tool cross-section: 25 x 25 mm Tool holder: BMT Compressed air connection: 5 / 160 bar / l/min Operating voltage: 400 V Coolant tank: 180 l Main motor power: 18.5 kW (30 min duty cycle) Rated power (100% continuous duty): 15 kW Machine weight: approx. 6 t Floor space: approx. 3.6 x 2 x 1.8 m Machine incl. the following special equipment: Side-mounted chip conveyor (right) Productivity package C – Special as per stock machine This package includes: High-performance coolant system (1.1 kW), max. flow rate 17.6 l/min Preparation for chip conveyor (side) Automatic tool eye STANDARD EQUIPMENT Transformer for the European market Linear guide system with guide carriages SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard color CE marking, metric, 50 Hz C-axis input accuracy: 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MT5 SAFETY DEVICES Operator door interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety measures according to international standards Gjdpfxov Dxw Rs Ag Rekf COOLANT SUPPLY Grundfos coolant pump, type MTA (0.25 kW / 7.6 l/min) Complete coolant system Automatic shut-off via circuit breaker MEASURING SYSTEM Absolute positioning system NUMERICAL CONTROL Synchronised tapping with milling spindle Relocation detector Mazatrol SmoothC 10.4" color monitor User macro (600 variables) EIA/ISO input function Background toolpath verification Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function LAN interface Various tool holders - All dimensions, weights and performance specifications non-binding - - Used machine without warranty -

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 100 mm, diameter roda gerinda: 350 mm, berat benda kerja di antara senter: 20.000 g, jarak antara pusat: 400 mm, jenis arus masuk: tiga fasa, lebar roda gerinda: 30 mm, kecepatan spindel (maks.): 1.200 rpm, kecepatan spindel (min.): 30 rpm, panjang umpan sumbu Z: 420 mm, daya motor spindle penggiling: 3.000 W, berat keseluruhan: 1.600 kg, tahun perombakan terakhir: 2025, tegangan masuk: 400 V, de-DE Gkedpfx Agowt Tgwo Ref

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 1.233 mm, diameter pembubutan: 420 mm, MAZAK Model QT SMART 350 M U1250 Year: 2014 Mazatrol Smart Control Max. turning diameter: 420 mm Max. swing diameter: 720 mm Max. turning length: 1,233 mm Spindle motor: 30 kW Max. spindle speed: 3,300 rpm Full C-axis Max. bar capacity: 102 mm Spindle nose: A2-11 12-position turret 12 stations for driven tools Driven tools: 7.5 kW Max. speed of driven tools: 4,000 rpm Travel: X-axis: 265 mm Gkodjrn Txkspfx Ag Ref Z-axis: 1,233 mm Tailstock: 1,265 mm High-pressure coolant, 15 bar Tooleye Mayfran chip conveyor, right-hand discharge Kitagawa B210 3-jaw chuck, diameter 254 mm Tailstock, MT5 Set of tool holders: 8 static holders + 2 driven tool holders Weight: 7,200 kg LxWxH: 3,770 x 1,910 x 1,900 mm