Mesin bubut CNC

Okuma LT 25-MY

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Knedpfx Asyidvdel Sjb Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: bekas, Tahun pembuatan: 2011, Mesin Frais Quaser MV 184 Tahun 2011 Knsdpfx Aoyfm T Hsl Ssb Mesin ditawarkan lengkap, sesuai dengan yang terlihat pada gambar. Termasuk catok hidrolik, unit agregat, konveyor serpihan, sistem filter sabuk, dan sistem ekstraksi.

Kondisi: bekas, Putar di atas penopang 400 mm Putar di atas kereta 350 mm Knedjxg Nd Aopfx Al Ssb Jarak antara centers 610 mm Gerakan panjang maksimum 560 mm Gerakan lintang maksimum 40+120 mm Kecepatan spindle 40-4000 rpm Diameter lubang spindle 52 mm Revolver dengan 12 stasiun Kontrol: Fanuc 6T Dilengkapi dengan: Lihat foto

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Kedpolz Rvlefx Al Sonb Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, MAZAK QUICK TURN 250MY SmoothG Diameter pemotongan maks.: 380 mm Panjang pemotongan maks.: 504 mm Kecepatan spindel frais maks.: 5.000 RPM Kecepatan spindel maks.: 4.000 RPM Diameter batang maks.: 80 mm Kodpfxjzk I Tqo Al Sjnb Mesin dilengkapi dengan: - PENGENDALI CNC Mazatrol SmoothG - Chuck tiga rahang KITAGAWA BB-210, diameter 254 mm - Tool Eye - Sumbu C - Sumbu Y - Antarmuka untuk majalah pengumpan batang - Penerima suku cadang otomatis - Penyangga ujung NC - Pompa pendingin yang diperkuat - Konveyor serpihan - 8 buah dudukan perkakas tetap - 2 buah dudukan perkakas yang digerakkan Mesin hanya memiliki 900 jam pemotongan efektif!!!

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA Ksdpfxsyw H Szo Al Ssnb - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power rating: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed as of 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts belt conveyor

Kondisi: baik (bekas), Teile, die mit der Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Kedpsyb R Erofx Al Ssnb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 5.785 h, okuma-genos-l300e-my-de Knsdpfxezat Tve Al Sjb

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 230 mm, panjang pembubutan: 810 mm, Perlengkapan: dokumentasi / manual, A like-new machine with accessories and complete documentation. Please review the pictures carefully regarding the operating hours!!!!! The machine will be available in approximately 4 weeks. Control System: Heidenhain MANUALPlus 640 HSCI - TFT screen 15.1" - Control panel with alphanumeric keyboard for comments and numeric keypad - Operating station pivotable 250° Powered tooling for automatic turret - With 8 tool stations - Tool drive via gears and clutch - Adjustable drive speed, max. 4000 rpm - Milling with slot mill Ø xtxv 12mmX8mmX45mm/min, C-axis via main drive - Main spindle speed 0.001°/min - 100 rpm Flat bed - Prism/flat guideway, hardened and ground Working area - Swing diameter over bed: 400 mm - Swing diameter over cross slide: 230 mm - Cross slide travel (plan): 220 mm Kodpjy Tzhpofx Al Sonb Main spindle drive - Digital AC motor – 50% duty cycle, 16 kW Headstock - Spindle nose DIN 55026 A6 - Spindle diameter at front bearing: 115 mm - Spindle bore: 82 mm - Speed range: 1–3500 rpm Cross slide - Feed range (plan): mm/rev - Feed range (longitudinal): mm/rev - Thread pitches: 0.01–999.9 mm - Rapid traverse (plan/longitudinal): 5/10 m/min - Automatic central lubrication - Digital AC servo motors (plan and longitudinal) Tailstock - Quill diameter: 60 mm - Quill stroke: 140 mm - Taper: MK 4 - Bed clamping with clamping bolts - Manual quill operation and clamping - Tailstock roller guide Control Features - HEIDENHAIN MANUALplus640 HSCI - Constant surface speed for manual and automatic turning - Electronic stop turning and automatic turning - Simple cycle input via dialog with graphic images - Contour cycles: roughing and finishing longitudinal and facing with tapers, radii, and chamfers - Drilling cycles with/without chip breaking - Drilling/hole circle cycle for axial and radial centering and drilling - Undercut cycles per DIN 76 and DIN 509 Form E+F - Special undercuts - Parting off - Threads: cylindrical, tapered, face threads with constant or variable pitch and with thread depth suggestion - Thread cutting cycle with chip breaking function - Thread repair - Various options within cycles - ICP interactive contour programming - Programming per DIN 66025 - Structured programming (UNTS) - Parallel programming - Geometry input absolute or incremental - Feed entry mm/rev or mm/min - Input of a safety zone in front of the chuck or simple stop - Graphic program simulation (line or cutting path) - Simulation single block or full program - Oriented spindle stop with angle specification - Automatic program run Choice of single block or cycle sequence (with door interlock) - Tool memory for 250 tools - User-friendly tool file - Technology database with 9 material-cutting material combinations - Assignment of cutting speed / spindle speed and feed - Parts program memory 1.8 GByte Standard accessories - Chip tray - LED machine light with energy saving function - Leveling elements - Temperature-controlled main motor fan control - Single-chamber filter for coolant cleaning, integrated in coolant line (40 microns) - Complete documentation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, en Knjdpfoy Spuuex Al Seb