Mesin bubut CNC

Okuma Macturn 250-2SW-1000

Kondisi: bekas, Tahun pembuatan: 1973, Spindle diameter: 130 mm X-travel: 3,000 mm Y-travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3,000 mm Y – Spindle head vertical: 2,000 mm Z – Spindle stroke: 1,000 mm Table dimensions (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Prjdpfxot Hwt So Adqsb Mounted table approx.: xx,000 mm Min./max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 - 2,000 mm/min Rapid traverse for spindle head and column: 5,000 mm Quill feed: 0.5 - 1,200 mm/min Spindle speed range, partially stepless: 4.5 - 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Steplessly adjustable spindle speeds and feeds, individual motor-driven feeds - Travelling operator’s platform, pendant control panel, hand control unit, platform - Hydrostatic guideways in column movement - Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (h), one machined side - Hydraulic clamping for column/carriage, motorized tool clamping - Comprehensive accessories, especially tool holders with and without tools - Free-standing chip extraction unit, clamping aids, one angle plate and plates, and much more

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 2.450 h, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 12.001.400 mm, jarak gerak sumbu Z: 18.001.790 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, berat benda kerja (maks.): 3.000 kg, tinggi total: 4.700 mm, panjang total: 12.700 mm, lebar total: 7.800 mm, diameter meja putar: 2.200 mm, kecepatan rotasi (maks.): 200 rpm, berat keseluruhan: 57.000 kg, kecepatan spindel (maks.): 8.000 rpm, jam operasional spindle: 2.450 h, pasokan pendingin: 40 batang, jumlah slot dalam magazin alat: 60, panjang alat: 460 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 6000 Travel Y-axis mm: 1200/1400 Travel Z-axis mm: 1800 (H) / 1790 (V) C-axis indexing degrees: 360º (0.001) A-axis indexing degrees: ±180° B-axis indexing degrees: ±180° Rapid traverse m/min: 30 Worktable Pallet dimensions mm: 6000 x 1235 NC milling/turning table: Pallet dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 Max. torque Nm: 4600 Spindle Max. spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/continuous) Spindle torque Nm: 382/278 (40/100%ED) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 900 Tool system Tool holder: HSK-A 100 Number of tools in magazine: 60 With empty adjacent pockets mm: 200 With adjacent pockets occupied mm: 104 Max. tool length mm: 460 Max. tool weight kg: 25 Tool change time (chip-to-chip) sec: 9.8 Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rinsing gun Operating mode 4 Blow air through spindle center selectable via M function Work area lighting DXF import function Paper band filter Automatic work area door Mounted indexing device for shaft machining Axes can be clamped hydraulically via M function (optional) Machine operating hours: Power-on hours: 29,447 Prodpfx Adozb H Tfjqsb Spindle operating hours: 2,450 Basic machine: Dimensions / Weight Length mm: 12,700 Width mm: 7,800 Height mm: 4,700 Weight kg: 57,000

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 9.950 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, Stasi Pengumpan Manual – 14 x feeder - 12 Clamp Binding Unit - Unit Milling & Persiapan Punggung - Lem Sisi Hot Melt dengan pre-melter – Lem Punggung Hot Melt dengan pre-melter - Drum Cover Feeder - Stasi Nipping & Pressing - Jalur Keluar & Pengiriman Laydown - Sistem Konveyor dengan Pintu Reject - Trimmer Muller Martini Esprit Ketebalan penjilidan 2 mm - 50 mm Ukuran cover maks. 640 mm Ukuran cover min. 202 mm Kecepatan maks. 900 hingga 4.000 siklus/jam Ukuran buku maks. 380x320 mm Ukuran buku min. 120x100 mm Prodpfjxtau Eex Adqob

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 3.000 h, jarak pergerakan sumbu X: 6.100 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 950 mm, CNC-Fräsmaschine mit Fahrständer – Komplett modernisiert durch REM (2021) Podpfxjn D N H Ts Adqjrb Leistungsstarke und vielseitige Schwerlast-Fräsmaschine, 2021 von REM-Spezialisten vollständig auf den neuesten Stand gebracht mit moderner Heidenhain TNC 320 Steuerung. Sofort einsatzbereit für die Produktion. HAUPTDATEN: • X-Achse (Querweg): 6.000 mm • Y-Achse (Vertikalweg des Fräskopfes): 2.000 mm • Z-Achse (Längsweg des Schlittens): 950 mm • Doppelfräskopf | Kopfdrehung: 360° • Spindeldrehzahl: 1.000 – 4.000 U/min • Spindelaufnahme: ISO 50 (automatische Spannungsfreigabe) • Kopfmaße: 290 × 290 mm • Spindelantriebsleistung: 15 kW (Gleichstrom) • Maschinengewicht: ca. 32 Tonnen • CNC-Steuerung: Heidenhain TNC 320 IHRE VORTEILE BEI REM: ✔ Maschine vollständig geprüft und im Einsatz getestet ✔ Moderne CNC-Nachrüstung – neue Elektrik, neue Antriebe ✔ Dokumentation und technischer Support verfügbar ✔ Weltweiter Export | Attraktive Versandkonditionen Ideal zur Bearbeitung schwerer Werkstücke in Luftfahrt, Energie und Schwerindustrie. Fordern Sie jetzt die vollständigen technischen Daten, Fotos und ein Vorführvideo an.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 30.222 h, tinggi total: 3.240 mm, berat keseluruhan: 8.880 kg, Mesin 3 sumbu tipe Hurco VMX 50i ini diproduksi pada tahun 2014 dan dilengkapi dengan meja kerja yang kokoh dengan dimensi 59 x 26 inci, serta kecepatan spindel maksimum 12.000 RPM. Mesin ini menawarkan kapasitas alat sebesar 40 alat dan waktu penggantian alat yang cepat (ATC) yaitu 2 detik. Ideal untuk pemesinan berkinerja tinggi yang presisi dengan beban meja maksimum 4.410 lb. Jika Anda mencari kinerja pemotongan berkualitas tinggi, pertimbangkan Hurco VMX 50i yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Majalah alat dengan 30 tempat • Ukuran meja: 1500 x 660 mm • Alur-T: 6 x 18 mm • Beban meja maksimum: 2000 kg • Jarak dari ujung spindel ke meja: 101 mm • Kecepatan spindel maksimum: 12.000 RPM • Daya spindel (15 menit/operasi berkelanjutan): 15 kW / 11 kW pada 720 RPM • Torsi spindel (15 menit/operasi berkelanjutan): 198,9 Nm / 116,7 Nm pada 720 RPM • Tipe alat: CAT 40 / Big Plus® Psdpsx D E Eqsfx Adqerb • Kapasitas alat: 40 • Diameter alat maksimum: 76 mm • Panjang alat maksimum: 300 mm • Berat alat maksimum: 7 kg • Waktu penggantian alat (ATC): 2 detik Dimensi Kedalaman Mesin: 5055 mm

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 1.000 t, lebar meja: 1.500 mm, tabel jarak ke piston: 1.750 mm, panjang total: 2.700 mm, Gebrauchte 1000-Tonnen Hydraulikpresse zu verkaufen 1000-TONNEN-PRESSE SEITENRAHMEN Maximal TYP KAPAZITÄT: 1000 Tonnen DRUCK: 175 kgf/cm² HUB: 1000 mm LICHTSPALT (DAYLIGHT): 1750 mm WERKZEUGAUFLAGE (BOLSTER AREA): 2700 mm x 1500 mm Prjdpfjucdgpjx Adqjb RÜCKZUGSKRAFT (PULL BACK CAPACITY): 52,7 Tonnen ZIEHKISSENKRAFT (DIE CUSHION CAPACITY): 50 Tonnen ZIEHKISSENHUB (DIE CUSHION STROKE): 180 mm HAUPTMOTOR: 415 V, 50 Hz, 6-polig, 110 kW ÖLTANKKAPAZITÄT: 1800 Liter

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 13-13, Die BLOMAX 4 Blasformmaschine ist das Modell 13-13. Die Maschine weist keine Mängel auf und befindet sich in einem hervorragenden Zustand mit voller Funktionsfähigkeit. Anschlussleistung: 400V/150A/60000W. Baujahr: 2000. Prodpfx Aet Akgwsdqeb

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Spindle speed: 7000rpm, spindle power: 50HP, tool magazine: 80. Dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24,000kg. An on-site inspection is possible. Pedjtx Dn Uopfx Adqjrb

Kondisi: baik (bekas), Tahun pembuatan: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control unit: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Prodpfezr Uudjx Adqeb Travel distances - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary roundtable): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 deg/min Spindle - Max. spindle speed: (rpm) 12,000 - Drive power (S6 40% duty cycle): (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool stations: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table rotary tilting table Pallet system - Pallet changer: dual - Clamping table dimensions: (mm) 500 x 400 Rotary tilting table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Through-spindle coolant (IKZ) 70 bar + Hinged belt chip conveyor + Oil mist extractor + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal beacon (3-color) Subject to technical modifications and errors.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 935 mm, produsen pengendali: OKUMA, model controller: OSP-P200L, jumlah sumbu: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turning-milling center with a bed overhang of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, tool changer, and tool magazine for 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking for a high-quality lathe, you should consider the Okuma Multus B300-W we have for sale. Contact us for more information. • ATC / Tool magazine: 40 positions • Tool changer • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub-spindle: A2-6 nose; 38-5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment Predex D Rvhopfx Adqeb • Bar feeder IF • Approximately 60 HSK 63 tool holders • A half pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets