Mesin bubut CNC

Okuma Spaceturn LB 300 MY

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 346 h, jumlah sumbu: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and has rapid traverse rates of 24 m/min in the X axis. If you are looking for high-quality turning and milling capabilities, you should consider the Hurco CNC TMX 8 MYSi turn-mill center. Contact us for further details. • X-axis travel: 203 mm Bdedjym T Itopfx Afpog • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Maximum turning diameter: 508 mm • Maximum turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Maximum main spindle speed: 4,500 rpm • Maximum sub-spindle speed: 6,000 rpm • Synchron spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar passage: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interrupt capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included, swivel holders are not included.

Kondisi: bekas, Tahun pembuatan: 2000, Table length: 1160 mm Table width: 710 mm Passage: 650 mm Control unit: WENZEL ME 5007 Bdodpfx Afjt Hw S Ijpog Total power requirement: kW Machine weight approx.: 800 kg Space requirement approx.: m WENZEL CNC-controlled vertical 3D coordinate measuring machine Type: LH 54 CNC, Year of manufacture: 2000 Regularly maintained and calibrated by the manufacturer Y-axis as longitudinal traversing measuring bridge: 600 mm X-axis as cross traversing measuring head carriage: 500 mm Z-axis as vertical measuring quill approx.: 400 mm Max. workpiece weight / table load approx.: 200 kg Clearance under measuring bridge approx.: 650 mm Usable table size overall approx.: 1,160 x 710 x 160 mm Table height above floor approx.: 850 mm Machine height approx.: 2,300 mm Weight approx.: 800 kg Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, crossbeam and quill made of dark natural hard stone; table fitted with 3 x 4 threaded holes for clamping workpieces/fixtures • All axes are air-bearing and thus extremely smooth-running, virtually wear-free, and equipped with incremental scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type ME 5007 for 3 to 6 axes with ME 4700 mobile hand control panel with 2 joysticks, enabling full access to all software functions—ideally equipped for: • WENZEL measuring software Type METROLOG – II Level 2 for measurement of standard geometries, graphical 3D workpiece display, graphical protocols, etc., including keyboard • RENISHAW control unit Model PHC 10 – 2 suitable for • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° steps) Model PH 10 T with 5-way probe system Model TP 200 and various probe accessories, including RENISHAW Probe Interface PI 200 Automatic probe change possible, 6-position probe magazine Model SCR 200 mounted on table • Calibration sphere for table setup, worktable with console, various clamping devices • Various cassettes and several CDs with different software. Separate PC for measuring software and printer Condition: Very good – generally in stock, powered up for inspection, demonstration-ready, dismantled by a metrology specialist at previous owner and reassembled here. Delivery: From stock – as seen and inspected Payment: Net – upon receipt of invoice.

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Gebrauchte RAS 62.25 CNC-Abkantmaschine Bedpfxjn Tnzfs Afpedg Modell: 62.25 Hersteller: RAS Baujahr: 2012 RAS 62.25 CNC-Abkantbank Arbeitsbereich: 2540 mm x 2,5 mm CNC-Automatikanlage zum Biegen (Baujahr 2012) Komplett mit System 6000 Touchscreen-Steuerung (Bildschirm wurde kürzlich ersetzt) 3,2 Meter J-förmiger Hinteranschlag Doppelfußpedalsteuerung MACHINE GUARD SOLUTIONS Lichtschranken Komplett mit segmentierten und geraden Werkzeugen

Kondisi: baik (bekas), Tahun pembuatan: 2006, Pusat pemesinan Hurco VMX 30 dengan sumbu ke-4 Kitagawa, pendingin melalui spindle (IKZ), ragum NC 125, berbagai holder alat, kondisi terawat Bodpfsxrcnlox Afpsdg

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 2.200 kg, KUKA KRC4 Linear Axis 1500/3T Bdodpsvzxg Tofx Afpog Item number: 8143983 Serial number: 143983 The KUKA KRC4 linear axis is a high-precision and robust motion unit, ideally suited for industrial applications. It ensures precise control of movement sequences and plays a central role in automation processes as well as robotic systems within manufacturing. Its sturdy construction guarantees consistently reliable performance, even in the most demanding environments.

Kondisi: baik (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 725 mm, CNC control Sinumerik 840D NC rotary table, B-axis Magazine for 320 tools Pallet changer unit, 2 pallets 500 mm x 500 mm Internal coolant supply ICS (80 bar) Chip conveyor Coolant system Technical data: X-travel longitudinal: 750 mm Y-travel vertical: 750 mm Z-travel cross: 725 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 50–10,000 rpm Tool positions in changer: 320 Feed rate: 60,000 mm/min Bedpfxoq Ui Hqo Afpodg Rapid traverse: 60 m/min Spindle drive power 40/100% duty cycle: 37/24 kW Machine weight approx.: 15,000 kg Technical data, accessories and description of the machine are not binding.

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Electrode force: 100 daN, welding power: 255 kVA, rated power: 80 kVA, with DALEX DRF 5.2 cooling system. Bdsdpfx Ajiknv Eofpsg

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Bdjdpfsd Iin Hex Afpsg Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Commissioning: as Okuma stock machine 09.2017 Control: OSP P300S Machine equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor power 32kW Torque 955Nm. ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustment range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1,500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-position tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: High-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum-type filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for lower turret) ▪ Automatic door system ▪ Robot Interface Type E for linking further loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in CAM system Technical details Bodpfx Aeyviigsfpodg ▪ Main drive (Okuma motor spindle): 22kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 steps Range switching at full speed ▪ Lower turret: 12 stations With cylindrical roller linear guides in ZB-axis With slideways in XB-axis ▪ Collision Avoidance System (CAS) in real time ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touch screen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° ▪ Y-axis with travel +150 / -150 = 300 mm ▪ B-axis 240° Positioning in 0.001° ▪ Tool spindle (Okuma motor spindle): 22kW / 120Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. 20 bar pressure Including bag filter, external coolant supply for tool spindle, pump with max. 3 bar pressure ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measuring device (when using standard chuck) for safe setup ▪ MacMan machine management with integrated production data acquisition (PDA) ▪ Parts program memory 2 GB ▪ Max. length of individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation through periodic speed variation ▪ Tool height offset in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection function) ▪ Coordinate transformation (shift, rotate) ▪ Electronic spindle orientation +/- 0.1°

Kondisi: bekas, Tahun pembuatan: 2010, en Bdsdpoytcf Ujfx Afpjg