Konveyor alur dengan roda pelempar untuk mesin peledakan besi

Oliver Fritz GmbH & Co. KG SRGB.10.09.1-11

Kondisi: baru, Airtower FT 20,000 model designation Redpegvqzcofx Ahwjp

Kondisi: baru, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end bearing Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Rodsiffwqopfx Ahwsp Weight: 2,150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm All bending capacities are calculated based on a yield strength of 250 N/mm² Material: (ST 37 - ST 42 construction steel)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle Rjdpfx Ajph Uk Nohwep - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Rjdpsfxyhfofx Ahwep Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Kapasitas angkut: maks. 1.500 kg Rentang ketebalan kawat: 0,5 - 9,0 mm Diameter luar bundel: maks. 1.000 mm Diameter dalam bundel: min. 300 mm Kecepatan putar: 0 - 80 rpm Rjdsvam Iispfx Ahwep

Kondisi: baik (bekas), Plant: REWA Chamber Filter Press Used Model: 470-15-25K-HP Design: Side beam guided Filter plate size: 470 x 470 mm Rodpjqakbrsfx Ahwop Number of plates: 15 Filter plates: PP Filter cloths: optionally available, tailored to the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (wetted parts): flanges and thru-rods stainless steel, PP or rubber-coated Material (non-wetted parts): stainless steel Purchase or Rental: Systems can be inspected at our facility by appointment. Miscellaneous: We supply the plant either used and operational, or refurbished and customized according to your requirements. Interested in buying or renting this unit? Please contact us – we will be happy to assist you.

Kondisi: baik (bekas), Maschine Typ Hakenstrahlanlage 250 kg TOSCA TS-250 Redpfovpgq Njx Ahwop Typ: Hakenstrahlanlage Max. Werkstückdurchmesser: 1000 mm Max. Werkstückhöhe: 1500 mm Max. Werkstückgewicht: 500 kg Maschinenöffnungsbreite: mm Anzahl Turbinen: 2 Turbinen-Typ: 360 Turbinenraddurchmesser: 360 mm Turbinenleistung: 7,5 kW Max. Turbinenförderleistung: 105 kg/min Fördergleistyp: Y Reinigertyp: Luftabscheider Fundament: nicht erforderlich Gehäuseschutz: Mangan + Gummi Erforderlicher Luftdurchsatz: 3.000 m³/h Max. installierte Anschlussleistung: ca. 19 kW Gesamtgewicht der Maschine: 0 kg Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm Die Maschine befindet sich in einer vollständigen Generalüberholung. Sämtliche beschädigten Komponenten werden durch Neuteile ersetzt, Turbinen werden komplett überholt, neue Lackierung RAL 7037/2000. Die Maschine wird in einem Zustand ausgeliefert, der einem Neugerät entspricht. !!! ZUSTAND WIE NEU !!!

Kondisi: bekas, Palet dengan slot T, cocok untuk DMG DMC 100 H dan DMG DMC 100 U. Beberapa palet masih tersedia. Redpfx Ahjqx Uh Newep

Tahun pembuatan: 2013, Kondisi: bekas, Cutting diameter: 420 mm Band saw blade length: 41 x 5600 mm Rjdpfxjd Izmaj Ahwjp Cut width: 1.3 mm Control system: Simatic S7 Touch Blade speed: 17 - 110 m/min Saw drive motor: 7.5 kW Round material diameter: 420 x 3000 mm Round material diameter: 300 x 6000 mm Total power requirement: 30 kW Machine weight: approx. 18.5 t Space requirement: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S bandsaw, equipped with round bar magazine and discharge gripper for cutting round bars from 50 to 420 mm. Includes 6 storage compartments, each with a maximum bar weight of 3,400 kg. Cutting lengths: 20 – 1,000 mm. As-new condition, approx. 1,000 operating hours.

Tahun pembuatan: 2020, Kondisi: baru, Available from stock Redpoiryf Ssfx Ahwep Band dimensions: 4420 x 34 x 1.1 mm Cutting capacity (rectangular): 360 x 400 mm Cutting capacity (round): 360 mm Bundle cutting capacity: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Main drive motor power: 3.75 kW Hydraulic pump motor power: 0.75 kW Coolant pump motor power: 0.125 kW Table height: 755 mm Weight: 1680 kg Dimensions (W x D x H): 2400 x 2120 x 1840 mm