Dewan sandblasting, gerobak sandblasting bertenaga

Oliver Fritz GmbH & Co. KG Strahlwagen mit Antrieb

Kondisi: baik (bekas), Tahun pembuatan: 1992, JAESPA bandsawing machine, model W400 AZ Control: Minipos 807, Year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total connected load: 4 kW Approx. weight: 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Gsdpfx Adegf H Sastjbg Space requirements: 2.8 x 2.8 x 2 m

Kondisi: bekas, nomor mesin/kendaraan: 51568, Pressure: 100 t Stroke: 0-500 mm Table area: 800 x 650 mm Ram area: 800 x 600 mm Through-hole in table: 355 mm Gsdpfx Aocxxrrodtsbg Table height above floor: 800 mm Installation height: 1130 mm Approx. machine weight: 5.7 t Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with stroke in upper position. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun measurement 135 mm/s, overrun distance 44 mm.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 7.385 mm, lebar total: 1.471 mm, panjang total: 3.275 mm, 8 Kardex Megamat RS 350 vertical carousels in excellent condition. Godpjv Svmrefx Adtjbg The installation includes 8 units manufactured between 2013 and 2018. Available in three height options: 7,185 mm, 7,384 mm, and 7,585 mm. Each vertical carousel is configured with 34, 35, or 36 trays. For further details or inquiries, please do not hesitate to contact us.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SAPI Jumbo, tekanan: 12 batang, lebar total: 3.087 mm, tinggi total: 2.078 mm, panjang total: 3.692 mm, berat keseluruhan: 3.000 kg, lebar dalam: 2.340 mm, panjang dalam: 3.520 mm, tinggi dalam: 2.500 mm, berat benda kerja (maks.): 500 kg, luas filter: 20 m², Perlengkapan: pencahayaan, This fully operational, assembled, walk-in JUMBO blasting cabin offers a comprehensive solution for efficient blasting operations. Equipped with 2 LED blast chamber lights, it ensures optimal illumination of the work area. The double-winged door allows easy access and handling of larger workpieces, while the blast-resistant rubber lining on the walls protects the interior from wear and extends the cabin’s service life. For air filtration and dust reduction, the cabin is fitted with a powerful cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor with grating cover provides automatic recovery of the blasting media, and the electrically powered drive unit for the conveyor system guarantees smooth operation. Additionally, the cabin is equipped with a bucket elevator and a high-performance media reclaimer to efficiently process and reuse the blasting media. The pressure blast vessel with a capacity of 38 liters offers sufficient volume for extended work cycles. The scope of delivery also includes a 10-metre blasting hose and a durable boron carbide nozzle, ensuring optimal blasting results. This blasting cabin is ideally suited for companies seeking a reliable and efficient solution for blasting applications. *Special equipment such as loading trolleys is also available on request* Compressed air and electrical supply, as well as installation, are to be provided by the customer. Gedpfeukdfpox Adtsbg If we have aroused your interest, please feel free to contact us at any time!

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser enables marking of nearly any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many sectors, laser marking has become indispensable for permanent inscriptions. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without in-depth programming knowledge. The software can automatically increment serial and article numbers once configured. Additionally, it can extract data (variable information such as drawing numbers, project names, etc.) from existing spreadsheets and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with bracket, Windows operating system, and laser software. Optionally, the LAS 28 XL can be outfitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available on request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064 nm • Marking field size 150x150 mm (larger optional) • Marking software EZCAD in German/English • Signal tower for operational status indication • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system Gbjdpfeqfcvijx Adtjg • Optional: fume extraction (incl. activated carbon filter) • Optional: extension arms for large components (single-sided, double-sided) • Optional: autofocus system • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Laptop with bracket and Windows OS • Frame made of aluminum profiles • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Kondisi: baik (bekas), Trommel-Gummi-Hängeband-Strahlanlage Max. Chargenvolumen: 800 L Max. Chargengewicht: 2000 kg Gbsdpfxslf Hq Nj Adteg Max. Werkstückgewicht: 150 kg Trommeldurchmesser: 1350 mm Trommelbreite: 1350 mm Anzahl der Turbinen: 2 Leistung je Turbine: 11 kW Max. Turbinendurchsatz: kg/min Reinigertyp: Luft Fundament erforderlich: nein Gehäuseschutz: Mn Erforderlicher Luftstrom: ja Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm

Kondisi: baru, AGRE ALUP ALLEGRO 14+ 13 270 Speed-controlled. Space-saving. Cost-effective. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Impressive compressed air quality. Cyclone separator and refrigeration dryer integrated. Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Control: Speed-regulated with frequency inverter Godpeixt I Hefx Adtsbg Controller: Graphic controller C55DD Refrigeration dryer: Integrated, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Rated motor power: 15 kW Oil quantity: 5.2 l Dimensions and Weight: L x W x H = 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l

Tahun pembuatan: 1992, Kondisi: sangat baik (bekas), Gebrauchte 700-Tonnen-H-Rahmen-Hydraulikpresse zu verkaufen Hersteller: Müller Presskraft (t): 700 Gedpfx Adehcfzkotjbg Anzahl der Zylinder: 2 Tischabmessungen (X-Y/mm): 4000×2200 Stößelabmessungen (X-Y/mm): 4000×2200 Hub (mm): 1400 Durchgangshöhe bei O.T. (mm): 1920 Zugkissendruck (t): 400 Zugkissenhub (mm): 500

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed, left rotation: max. 10,000 rpm Spindle speed, right rotation: max. 10,000 rpm Distance between uprights: 2,500 mm Spindle-to-table distance (vertical): 1,230 mm Table clamping surface: 3,000 x 2,000 mm Gbodpfxju Nc Ems Adtog Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight: approx. 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-axis gantry milling machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, type fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, type rotary table with indexing disc, for 32 tool holders Chip conveyor: 2 hinged belt conveyors, manufacturer DGS, with coolant tank, insertion length 8,500 mm Manufacturer BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil/water cooling unit for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via control panel type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with inspection windows and safety doors) Hydraulic system Work area lighting

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Gsdjhzbipspfx Adtebg Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.