Balkenpressen Orma

Orma

Tahun pembuatan: 1999, Kondisi: bekas, en_ORMA_PM_AIR_1999_Listing Djdpfxswnhice Aaqout

Kondisi: belum diuji (bekas), Tahun pembuatan: 1991, Torwegge multi-blade saw Chain width: 250 mm Dusdpeucnuksfx Aaqst Cutting height: 100 mm Total connected load: 39 kW

Kondisi: baik (bekas), 0378 Dodpfx Aajy I Tqreqout

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Table length: 3000 mm Table width: 1300 mm Table opening: 400 mm Cylinders: 6, diameter 70 mm Duodpji E Tz Hjfx Aaqjt Pressing force: 90 tons Power: 21 kW Heating: Diathermic oil

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), A multi-blade saw from Construzioni Macchine Legno s.r.l. is available. Saw blade diameter min./max.: 250 mm / 360 mm, bore diameter min./max.: 70 mm / 95 mm, cutting width: 320 mm, variable/fixed cutting height: 90 mm / 120 mm, weight: approx. 3,000 kg. Inspection on site is possible. Dedpfewv Umwjx Aaqjut

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, shelf length 3000 mm Djdpey N Rchjfx Aaqeut shelf width 1300 mm oil heating – built-in heater 6 hydraulic cylinders cylinder diameter 85 mm clearance between shelves 650 mm pressure 3 kg/cm² pump motor power 2.2 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: P0220118, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 9 t, jumlah silinder: 6, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 1.300 mm, tinggi benda kerja (maks.): 200 mm, Perlengkapan: Penandaan CE, DETAIL TEKNIS Panjang benda kerja maks.: 2.500 mm Lebar benda kerja maks.: 1.300 mm Tinggi benda kerja maks.: 200 mm Jumlah silinder: 6 Dusdpfxoy Akukj Aaqst Total tekanan kerja: 90.000 N Tekanan kerja: 294.200 N/m² DETAIL MESIN Dimensi & berat Dimensi (P x L x T): 3.000 x 2.070 x 1.670 mm Berat kosong: 4.000 kg PERLENGKAPAN Penandaan CE

Kondisi: baik (bekas), Through-feed line for door leaf processing, high-performance machine—processing of a single leaf (lock box, handle, and hinges) in approximately 30 seconds. The machine consists of two sections, each with a left and right station performing specific operations. The first section: the left station mills for the lock faceplate and drills for the handle and key; simultaneously, the right station drills for the hinges. The second section: the left station creates and deepens the lock pocket; at the same time, the right station screws in the hinges. Dodpjuq Scpefx Aaqjut

Kondisi: bekas, Tahun pembuatan: 2018, panjang total: 3.000 mm, lebar total: 2.070 mm, tinggi total: 1.670 mm, de_hu_001 Dedpfx Aaewniqzoqsut

Kondisi: bekas, de-to-hu:75kg-industrie-angebot Duedpoybb D Sefx Aaqst

Kondisi: bekas, Tahun pembuatan: 2005, Used machine Year of manufacture: 2005 Equipment and technical specifications: - Base machine 555 - Working dimensions for edge processing: - X = 3514 mm - Y = 1544 mm - Maximum working dimensions: - X = 3868 mm - Y = 1746 mm Dusdpfxjx Enpqs Aaqet - Z = 325 mm - Workpiece support with 8 pneumatically clamped consoles - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in X-axis and 6 in Y-axis - individually selectable - T-shaped arrangement - Max. drilling diameter: 35 mm (depending on panel thickness) - Spindle travel: 70 mm - Rotation direction: alternating right/left - Speed: 4,725 rpm, steplessly adjustable - 2 horizontal drilling units in X direction, 1 horizontal drilling unit in Y direction - Saw unit 7946: - Motor: 3.5 kW - 90° pneumatically swivelling - Speed: 5,300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (carousel type) - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control Availability: short-term Location: 63934 Röllbach

Kondisi: bekas, FRAME PRESS ORMA EUROPA Line voltage: 380 V - 50 Hz Control voltage, magnetic components, lamp: 110 V Main circuit protection: 3 x 25 A Duodpfxswudzbs Aaqet

Kondisi: siap digunakan (bekas), Panjang rak: 2500 mm Lebar rak: 1200 mm 4 piston hidrolik 75 mm Celah bebas: 400 mm Pemanas air Djdpfx Aaeyynzpsqout

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, HÄWA /SWT Maschinenbau Mesin Pengupas Kulit Kayu – Baru -- --- Mesin demonstrasi --- tersedia segera - Buatan Jerman - Tipe H256 / 800 - Terbuat dari konstruksi baja berat yang dilas - 4 pasang roda penggerak batang - 1 pasang roda penggerak batang terbagi dan bergerigi - Penggerak batang dengan pengaturan frekuensi - Lengan milling terbuat dari konstruksi baja berat - Kepala milling: lebar kerja 300mm, batang pemukul, pisau pemukul, dan cincin pelindung - Kepala milling dilengkapi dengan karbida - Penurunan kepala milling secara hidrolik - Gerak maju kepala milling diatur frekuensinya Dodpexx Am Ujfx Aaqsut - Roda penggerak batang diameter 800mm - Diameter batang 0,2m – 1,0m - Panjang batang 1,0m – 6,0m - Daya total terpasang 35kW - dengan remote control radio HBC

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, ORMA NPC-4-70 Shelf Press – After Technical Inspection, Ready for Operation Specification: • Condition – used, after comprehensive technical inspection • Manufacturer – ORMA • Model – NPC-4-70 • Shelf dimensions: 250 x 130 cm • Maximum clearance between shelves: 480 mm • Shelves are flat, clean, and free of dents or damage • 4 cylinders with a diameter of 70 mm • Maximum pressure: 300 bar • Maximum pressing force: 70 tons • Automatic re-pressurization in case of pressure drop • Shelves adapted for water/glycol or oil heating • Circulation pump and heating boiler included • Maximum power consumption: 20 kW • Equipped with a safety cable (emergency stop) • Original paintwork • Weight ~ 3,000 kg • Year of manufacture: 2004 • Overall dimensions: 310 x 190 x 210 cm (L x W x H) Djdjyxdluspfx Aaqeut Additional Information: • Good, factory technical condition; complete seal set replaced • Photographs show the actual item for sale • Possibility to connect and test the machine on site • The price listed in the auction does not include VAT or transport costs Financing and Transport: • We arrange transport using MDD fleet, courier services, or external carriers • Financing available in the form of lease or lease loan