LOKASI RP18

ORT RP18

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 3.200 kg, diameter spindel: 6.995 mm, jenis arus masuk: tiga fasa, diameter rol: 210 mm, kecepatan spindel (maks.): 20 rpm, kecepatan spindel (min.): 60 rpm, tinggi total: 1.900 mm, panjang total: 2.700 mm, lebar total: 1.600 mm, lebar rol: 175 mm, tahun perombakan terakhir: 2026, masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, Thread rolling machine - thread rolling machine ORT RP18 2-roller Overhauled - new Siemens PLC See video Gjdpevxa Dbjfx Amzokd The machine is located in our warehouse in Gussago BS, under power Test run possible Mimu machine tools Thread rolling is a mechanical process without material removal, which can be carried out cold or hot, serving the purpose of improving surface finish (and thus fatigue behavior).

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), DE-SMS MEER CNC-DOPPELSEITIGE ANFASMASCHINE Hersteller: SMS MEER Typ: RFA 14 Baujahr: 2000 Arbeitsbereich: Rohr-Ø 21,3 – 114,3 mm Wandstärke: 2,3 - 11 mm Länge: 6-12 m Bestehend aus zwei RFA14-Angleautomaten mit Fördereinrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Anfasen der Innen- und Außenseite beider Rohrenden. Der Durchmesserbereich der angefasten Rohre beträgt 21,3-114,3 mm bei einer Wandstärke von 2,3-11 mm und einer Länge von 6-12 m. Die Aufgabe des Transports im Bereich der Anfasmaschinen besteht darin, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu bewegen. Godjghrguopfx Amzekd

Kondisi: bekas, Tahun pembuatan: 2007, Brand: ORT Model: RP18 Year: 2007 Maximum rolling force: 18 tons Roller shaft diameter: 54 mm Roller shaft key width: 12 mm Gkjdpfxjv Tqdbe Amzed Minimum workpiece diameter: 3 mm Maximum workpiece diameter: 60 mm Maximum plunge rolling length: 175 mm Maximum through-feed rolling length: — Maximum workpiece pitch: 4 mm Minimum roller diameter: 140 mm Maximum roller diameter: 185 mm Main motor power: 7.5 HP Total installed power: 11 HP Maximum noise level: 80 dB Net weight: 1,800 kg Rolling shaft height from floor: 1,035 mm Machine width: 1,450 mm Standard machine depth: 900 mm Total machine height: 1,800 mm

Kondisi: diremaj di bengkel (bekas), diameter benda kerja (maks.): 60 mm, diameter rol: 185 mm, lebar rol: 150 mm, Satu unit – Mesin Pengerol Ulir Hidraulik Model RP18 – 18 ton yang telah diperbaiki, dengan spindel pengerol tetap untuk pengerolan umpan masuk atau pengerolan umpan lanjut dengan cetakan umpan lanjut heliks. Termasuk spindel pengerol baru, bantalan baru, dan roda gigi serta poros cacing baru, dll. Diameter pengerolan maksimum: 60 mm – Lebar pengerolan maksimum dengan cetakan umpan masuk: 150 mm – Lebar pengerolan maksimum dengan cetakan umpan lanjut: tidak terbatas. Diameter spindel: 69,85 mm & 80 mm – Daya motor utama: 7,5 kW Dilengkapi dengan satu pasang selongsong spindel 69,85 mm (diameter dalam) x 80 mm (diameter luar) & 17 set cetakan ulir lebar 60 mm, 120 mm & 180 mm, mulai dari M6 hingga M24. Gksdpfxjyml Eks Amzed Foto-foto diambil sebelum proses perbaikan.

Kondisi: bekas, Tahun pembuatan: 2006, minimale Steghöhe 80 mm, maximale Steghöhe 1.220 mm. Flanschhöhe mindestens 42 mm, maximal 600 mm. U-Profile mindestens 80 mm, maximal 1.200 mm. Flanschhöhe für U-Profile mindestens 45 mm, maximal 300 mm. Winkelprofile mindestens 80 x 80 x 8 mm, maximal 300 x 300 x 50 mm. Flachmaterial mindestens 100 mm, maximal 1.220 mm. Quadratrohre mindestens 80 x 80 mm, maximal 600 x 600 mm. Rechteckrohre mindestens 80 x 40 mm, maximal 1.200 x 600 mm. Positioniergewicht maximal 15.000 kg. Lineargewicht des zu bearbeitenden Profils maximal 750 kg/m. Verfahrgeschwindigkeit maximal 30 m/min. Anzahl der Bohraggregate: 3 - Zwei horizontale Bohraggregate, jeweils mit Einfachspindel - Ein vertikales Bohraggregat mit Einfachspindel Maximaler Bohrdurchmesser: 50 mm Gedex N Iclopfx Amzjkd - mit Morsekegel Nr. 4 Maximal bearbeitbare Materialdicke: 75 mm Spindelantrieb je Kopf (Wechselstrom): 15 kW Spindeldrehzahl (stufenlos regelbar per Programm): 180 - 3.000 U/min Positionierweg passend zur Messlinie: - Vertikale Bohrspindel: 20 bis 1.200 mm - Horizontale Bohrspindeln: 10 bis 600 mm WERKZEUGWECHSEL - Anzahl Werkzeugwechselgeräte: 3 - Anzahl Werkzeuge pro Wechsel: 6 - Werkzeugaufnahmegröße: ISO 45 Modell 1260 BH für den Kaltzuschnitt von Profilen: - Sägeleistung bei 90°: min. 80 x 10 mm - Sägeleistung bei 90°: max. 1.250 x 600 mm - Sägeleistung bei 45°: max. 800 x 600 mm - Sägeleistung bei 60°: max. 500 x 500 mm - Sägebandantrieb: 11 kW - Sägebandgeschwindigkeit: 20 bis 100 m/min. - Bandabmessung: 67 x 1,6 mm

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Gkodpeuz If Nofx Amzod Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1972, Fungsionalitas: berfungsi sepenuhnya, ae97d002 Godpfxowuutbs Amzjkd

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Number of spindles: 8 Godpfx Amemf Aw Aezekd

Kondisi: baik (bekas), Rolling pressure: 220 kN Workpiece diameter: 3 mm min; 70 mm max Pitch: 6 mm max Knurling pitch: 2.25 mm max Roller width: 160 mm max Roller diameter: 133 mm min; 170 mm max Gkjdpfovyyyxsx Amzed Roller shaft speed: 24, 30, 38, 45, 62, 72, 90, 114 rpm Roller shaft diameter: 54 mm standard; 69.85 mm special Distance between shafts: 135 mm min; 230 mm max Working stroke: 15 mm max Feed rate: from 0.5 mm/s up to 6 mm/s Rolling time: from 0.1 s up to 100 s Pause time: from 0.1 s up to 100 s Main motor: 5.5 kW Electrical power consumption: 8.6 kW Tank capacity: 130 L Approx. weight: 2100 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 2.200 kg, daya pompa pendingin: 180 W, panjang mata gergaji pita: 4.570 mm, lebar pita gergaji: 41 mm, AMADA HFA 400 – Automatic Bandsaw for Metal Series Production | AMADA Quality | Industrial The AMADA HFA 400 is an automatic horizontal bandsaw designed for precise and repeatable metal cutting operations in series production. This machine stands out thanks to its compact design, high rigidity, and proven AMADA Machine Tools technology. With a machine weight of 2200 kg and automated sawing cycles, the HFA 400 is ideally suited for manufacturing facilities, service centers, and toolmaking applications. ● Automatic bandsaw for metal ● AMADA brand quality ● Robust construction – 2200 kg ● Saw motor 5.5 kW ● Industrial-grade hydraulics ● Fully automatic sawing operations ● High precision and repeatability ● Suitable for solid and profile materials ● Durable and reliable design Technical specifications ● Model: AMADA HFA 400 ● Type: automatic bandsaw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW ● Saw blade dimensions: - Length: 4570 mm - Width: 41 mm - Thickness: 1.3 mm ● Power connection: Three-phase ● Connected load: 11 kVA ● Machine weight: approx. 2200 kg Gedpfx Amjyc H Ewjzjkd ● Year of manufacture: 2012 Condition: used, fully operational, immediately available 📩 Contact us for price and further information.