Mesin penggulung ulir

ORT RP18

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Mesin Pembuat Jaring ORT Italia Sertifikasi CE Tipe RP 18/U Tahun 2012 Panel Kontrol CNC Siemens SIMATIC OP17 Dcjdozb Imaspfx Achjk Nomor Referensi F24 10.000 € (termasuk biaya pengiriman)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, panjang pembubutan: 8.000 mm, diameter pembubutan di atas alas geser: 2.000 mm, berat benda kerja (maks.): 25.000 kg, diameter pembubutan di atas carriage atas: 1.550 mm, de2hu2it2lt20240615A Dcjdpexxxbzsfx Achjk

Kondisi: bekas, Tahun pembuatan: 2007, Brand: ORT Model: RP18 Year: 2007 Maximum rolling force: 18 tons Roller shaft diameter: 54 mm Roller shaft key width: 12 mm Minimum workpiece diameter: 3 mm Maximum workpiece diameter: 60 mm Maximum plunge rolling length: 175 mm Dodpfx Acsv Tqdbjhock Maximum through-feed rolling length: — Maximum workpiece pitch: 4 mm Minimum roller diameter: 140 mm Maximum roller diameter: 185 mm Main motor power: 7.5 HP Total installed power: 11 HP Maximum noise level: 80 dB Net weight: 1,800 kg Rolling shaft height from floor: 1,035 mm Machine width: 1,450 mm Standard machine depth: 900 mm Total machine height: 1,800 mm

Kondisi: diremajakan ulang (bekas), Thread rolling machine - thread rolling machine ORT RP18 2-roller Overhauled - new Siemens PLC See video The machine is located in our warehouse in Gussago BS, under power Test run possible Mimu machine tools Thread rolling is a mechanical process without material removal, which can be carried out cold or hot, serving the purpose of improving surface finish (and thus fatigue behavior). Dodpfxevxa Dbs Acheck

Kondisi: baik (bekas), Tahun pembuatan: 1998, panjang ulir: 65 mm, de-to-hu+it+lt_001 Dodpfxox H Rmus Achjck

Kondisi: bekas, Thread rolling machine – thread roller ORT RP18 2-roll Swivelling spindle Overhauled with Siemens PLC See video The machine is powered in our warehouse Djdpsuua H Rjfx Acheck Test run possible

Kondisi: bekas, Thread rolling machine - Thread rolling machine ORT RP18 2-Rolls Shaft diameter: 69.95 mm See video The machine is located in our warehouse in Gussago (BS), powered up. Dcsdpfx Aot Apugschok Test run possible Mimu Werkzeugmaschinen Thread rolling is a mechanical process without chip removal, which can be performed cold or hot, aimed at improving surface finish (and thus fatigue behavior).

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Djdpfx Acsuz If Nohsck Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] Dcedpfjuhb Uhex Achsk EQUIPMENT - CNC control (Siemens-based) - Tailstock unit - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Kondisi: baik (bekas), 1 used down-stroke press Dedpeul U Svsfx Achock Manufacturer: SACK & KIESSELBACH Year of manufacture: 1962/74 Serial number: 31900 Pressing force: 630 t Stroke: 310 mm Shut height: 320 mm Working height: 1200 mm Drive power: 10 kW