Pengeboran PANKOKE & KOCHSIEK BFA 05

PANKOKE & KOCHSIEK BFA 03 PANKOKE & KOCHSIEK BFA 05 Drilling

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Bak celup bekas, pabrikan Wichmann tipe WH 6,0 Giedpex Akq Nofx Alkjt - Panjang 6,0 m x lebar 1,75 m x tinggi 1,75 m, dimensi internal; - Tahun pembuatan: 1995; - Kontrol dengan PLC Moeller PS4 dengan pemilihan program; - Tatakan kayu sekitar 5 m panjang, penahan tekan sekitar 5 m panjang dengan rangka; - Dinding ganda dengan detektor kebocoran; - Bagian dalam sebagian berkarat; - Data transportasi: sekitar 7,50 m panjang, 2,44 m lebar, 2,98 m tinggi (rel pemandu dilepas); - Berat sekitar 10,0 ton; - Unit kosong, dimuat bebas ke truk.

Tahun pembuatan: 1991, Kondisi: hampir baru (bekas), berat keseluruhan: 1.420 kg, kecepatan rotasi (maks.): 1.485 rpm, 3 pcs stainless steel volute casing pumps in process design 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! The pumps were operated on a test bench and all have very low operating hours! See pictures! Flow rate: 1001 m³/h (278 liters/second) Delivery head / pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: single-acting mechanical seal with flush water Manufacturer: Burgmann Impeller type: closed radial impeller Impeller diameter: 324 mm Bearing type: rolling bearing Lubrication: oil Lubricant monitoring: oil level controller Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Cover plate: 1.4408 (AISI 316) Godpfoqabiaox Alkjit Shaft: tempered steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: gray cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Baseplate: painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Degree of motor protection: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Kondisi: diremajakan ulang (bekas), VERSCHIEDENE MOTORENTYPEN UND SCHLITTEN FÜR CELASCHI DET GEBRAUCHT, KOMPLETT GENERALÜBERHOLT Gijdedvlcyspfx Alket

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Machining centre Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working area X: 2,500 mm Working area Y: 1,300 mm Working area Z: 4 - 80 mm Number of milling units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Godpfoh E Sghjx Alkeit Horizontal drilling spindles Y: 4 Grooving saw: swivels 90° X-axis feed rate: 130 m/min Y-axis feed rate: 80 m/min Z1-axis feed rate: 50 m/min Z2-axis feed rate: 27 m/min Spindle speed: 18,000 rpm Dismantled – immediately available

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Cambio 500 debarking system consisting of: Infeed centering unit. Cambio 500 debarker: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Discharge control unit. Godpfx Aljwxdimeksit Tipping trough for long logs. Spare parts.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Giedpfx Aevf E Avelkot Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baru, Tahun pembuatan: 2022, Dowel hole boring device: no Giodpsgq Un Aefx Alket Drilling depth: 150 mm Mortise length: 180 mm Vertical adjustment travel: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), Reinchardt NC 700 Automatic Crosscut Saw Manufacturer: Reinchardt Model / Machine Type: NC 700 Gijdpfx Aed H Hmhslkst Year of Manufacture: 1998 Category: Crosscut Saw Location: Gorzów Wlkp. Delivery Conditions: Collection by the buyer Delivery Costs: Borne by the customer Commissioning: To be agreed Description / Comments: Crosscut saw for custom lengths, cutting accuracy up to 1mm, new controller installed, saw blade feed via hydraulic system.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, jenis laser: laser serat, produsen sumber laser: MAX Photonics, jam kerja laser: 10 h, daya laser: 3.000 W, panjang gelombang laser: 1.070 nm, ketebalan pelat baja (maks.): 22 mm, ketebalan maksimum lembaran baja tahan karat: 12 mm, tebal plat aluminium (maks.): 12 mm, ketebalan lembaran kuningan (maks.): 5 mm, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, Offered here is a high-precision laser cutting machine with 3000-watt laser power Type: LG-1313/3kW HaiCut Premium Line - Maximum configuration - Innovative 3-gas switching (pressure and gas type can be controlled via software) Cuts with N2, O2, and mixed gas (compressed air) - Automatic front door - Machine bed lined with fireclay - Machine bed and axes calibrated and aligned with Renishaw interferometer Our goal is to offer the best, most robust, and reasonably priced laser machines currently available on the market. Our machines are ideal for workshops and repair operations. A meticulously developed cutting parameter library is included, as well as first-class on-site service. Please also see our attractive leasing/hire-purchase offers. New machine, delivery time approx. 6-8 weeks We are happy to demonstrate the machine at our facility. Travel area: approx. 1300 x 1300 mm Table size: approx. 2500 x 1300 mm (allows placement of a mid-format sheet in the machine) Pull-out cutting table for high-precision metal cutting Fully installed and calibrated Cutting software in German incl. nesting module Very easy to operate Switch on and start cutting Laser source by Max Photonics (G5/German model) with 3000 W output Comprehensive electronic and mechanical collision protection for the cutting head Large laser protective window in the front door Automatic front door Safety light curtain for maximum operator protection Cuts stainless steel up to 12 mm Cuts mild steel up to 22 mm Cuts aluminum up to 12 mm Cuts brass up to 5 mm Heavy industrial quality Complete system / ready for immediate use LED work area lighting 200 mm duct connection for fume extraction incl. extraction fan Gsdpfsi Igausx Alkjit Leasing or hire-purchase possible via our financing partner Need another power rating or table size? No problem, we have various machines in stock or available at short notice. Sale to commercial customers only. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.5 m, Height: 2.1 m, Depth: 3.5 m Weight: approx. 2.5 tons

Kondisi: sangat baik (bekas), Direct drive Air flow: 12,000 m³/h Negative pressure: 4,880 Pa Motor power: 26 (30) kW Speed: 2,950 rpm Inlet diameter: 400 mm Outlet diameter: 400 mm Dimensions (L x W x H): 1,150 x 1,200 x 1,850 mm Note on used machines: • Errors in technical specifications and prior sale reserved. Gisdpfx Aleh Tfqheket • Stated prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen without any warranty claims. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries stating your address and telephone number!)