Mesin penggulung ulir

Pee-Wee P24US

Kondisi: bekas, Tahun pembuatan: 1992, Panjang penggerindaan 0800 mm Lebar penggerindaan 500 mm Tinggi benda kerja 400 mm Ukuran meja 800 x 400 mm Kecepatan meja 1 - 25 m/menit Gerak silang otomatis 0 - 60 mm/langkah Ukuran batu gerinda 400 x 100 x 127 mm Chjdpfxowgnz As Aagja Kecepatan putar spindle gerinda 1400/2800 rpm Kebutuhan daya total 10 kW Tegangan 380 V Berat mesin sekitar 6 ton Mesin dilengkapi dengan sistem pendingin cairan, pengumpanan vertikal otomatis, alat penyesuaian, dan dudukan batu gerinda. Sistem kontrol tidak dapat diandalkan karena usia!

Kondisi: baik (bekas), Tahun pembuatan: 1998, panjang ulir: 65 mm, de-to-hu+it+lt_001 Codpfxox H Rmus Aagoha

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Chedpfeuz If Nox Aagea Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 7.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.100 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 560 mm, gerak cepat sumbu X: 42 m/menit, pergeseran cepat sumbu Y: 42 m/menit, pergerakan cepat sumbu Z: 42 m/menit, model controller: FANUC 21iMB, berat keseluruhan: 7.500 kg, kecepatan spindel (maks.): 12.000 rpm, hidung spindel: BT-40, jumlah slot dalam magazin alat: 30, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, it-hu-center-di-lavoro-victor-a110 Csdpex Hap Ejfx Aagjha

Kondisi: baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C4655, panjang penggilingan: 5.000 mm, lebar penggilingan: 500 mm, Grinding length: 5000 mm Grinding width: 500 mm Workpiece height: 250 mm Spindle diameter in front bearing: 190.5 mm Chodpfx Aasq U Ihvjgja Swiveling: 0.7° Max. torque: 1771 Nm Max. speed: 593 rpm Feed: infinitely variable 20–35,000 mm/min Trapezoidal segment head, diameter 800 mm with trapezoidal segments: 94/103x38x200 mm Marposs measuring system Hydraulic upper part clamping and swiveling Grinding mist extraction system: Hydrocyclone cleaning system Machine weight approx. 27.6 t Space requirement approx.: 11.2 x 4.3 x 3 m

Kondisi: bekas, CNC-TOK-4601250 Chjdpfxoxwp Ebj Aagoa

Kondisi: siap digunakan (bekas), diameter putar di atas sled silang: 800 mm, diameter pembubutan: 800 mm, diameter pembubutan di atas alas geser: 560 mm, Mesin bubut senter VDF V6 Jarak antara senter: 5000 mm Chsdjxpillspfx Aagsa Diameter pembubutan: Di atas pemandu: 800 mm Di atas carriage: 560 mm Kecepatan spindle: 560 rpm Daya motor: 11 kW Aksesoris: Steady rest: 330 mm dan 420 mm

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Codpfx Aow D Aq Teagsha Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Roller shaft diameter 40 mm various rollers as accessories

Kondisi: bekas, Tahun pembuatan: 2006, Technical details: X-axis travel: 1000 / 600 mm Y-axis travel: 570 mm Z-axis travel: 570 mm Chedpfx Aaou Idfrsgsa Control unit: Fagor 8055 MC Tool magazine with: 24 stations Tool holder: SK 40 Spindle speed: 10,000 rpm Spindle taper: SK40 Infinitely variable feed rates X/Y/Z: 10 m/min Rapid traverse X/Y/Z: 24 m/min Operating hours / Power-on hours: not visible Table size: 1200 x 500 mm Table load capacity: 800 kg Distance spindle nose to table: min./max. 100/670 mm Interface: 232 Total power requirement: 15 kW Machine weight approx.: 5.0 t Machine dimensions approx. (LxWxH): 3.3 x 2.3 x 2.8 m Equipment: - Coolant system with supply to the spindle (no internal coolant supply) - Control panel with hand-held control unit - Chip conveyor - Electrical cabinet with Rittal SK 3305500 cooling unit as per attached photo.

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 2316-3, 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm Chodpfx Aou Et Nbsagoa - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Min./max. drilling radius: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2800 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Vertical T-slots on the left-hand side of the machine