Beli Pee-Wee P24Us bekas (1.042)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), Pee-Wee Model P24US Mesin Gulung Ulir Hidrolik untuk pengerolan in-feed atau thru-feed dengan dies thru-feed helikal Tekanan gulung maksimum: 24 ton Diameter gulung maksimum: 75mm Diameter gulung minimum: 5mm Lebar gulung maksimum: 200mm Diameter spindle penggulung: 69,85mm Diameter dies ulir maksimum: 210mm Kecepatan spindle variabel: 20 - 90 rpm Fjdpfx Aiexl Ebheregc

Kondisi: sangat baik (bekas), Pressure: 0.5 - 20 t Fgsdpfjvpaa Rsx Airsc Workpiece diameter - max. 5 - 75 mm Thread length: 2000 mm Pitch in mm: 8 mm Roll spindle holder diameter: 69.85 mm Tool diameter: 200 mm Roll spindle speeds: 20 - 90 rpm Stroke: 0 - 20 mm Total power requirement: 7.5 kW Machine weight approx. 3.1 t Space requirement approx. 1.9 x 1.1 x 1.2 m

Kondisi: bekas, Tahun pembuatan: 1971, nomor mesin/kendaraan: 15162, Diameter rol 150 mm, perangkat pendingin dan lampu mesin Fgsdpfx Aey Sqigjirsc

Kondisi: bekas, Tahun pembuatan: 1954, nomor mesin/kendaraan: 6315, Diameter rol 200 mm, perangkat pendingin dan lampu mesin Fedpfx Aijy Sqi Tsrjgc

Kondisi: bekas, Tahun pembuatan: 1998, de2hu-it-lt-lv-nb-nl-pl-001 Fgjdjy Nd Scepfx Airoc

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece. Fjdpfsuz If Nex Airegc

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Mill, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year of manufacture: 2004 Rolling force max.: 24 tons Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Tool holding length / tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic drive motor power: approx. 3 kW Roll drive motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated into machine base Installation dimensions (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge Rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed Rolling: Used when thread length is greater than the width of the rolling tools. Through-feed tools have three sections—the entry, the calibration zone, and the exit. Knurling rolls have no pitch and are swiveled at the lead angle of the profile to be rolled. Fjdjh A S Htepfx Airogc Lead Rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and the swivel angle results in the lead angle in the workpiece.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 00049781, diameter benda kerja (maks.): 50 mm, diameter spindel: 69 mm, kecepatan spindel (maks.): 5.000 rpm, panjang langkah: 130 mm, jarak antar baris: 255 mm, RINCIAN TEKNIS Fgedpfsxbfwzsx Airjc Luas penopang: 180 mm Diameter benda kerja: 4 - 50 mm Tekanan penggilingan (penyesuaian tanpa langkah): 0-200 kN Kecepatan pemajuan (penyesuaian tanpa langkah): 0-50 mm/s Siklus penggilingan per menit: 0-86 Spindel penggilingan Diameter spindel penggilingan: 69,85 mm Jarak antar spindel penggilingan: 125 - 255 mm Panjang penjepitan spindel: 160 mm Langkah carriage spindel penggilingan: 130 mm Kecepatan putar spindel penggilingan: 3000-5000 rpm Diameter alat penggilingan: 130 - 200 mm Tinggi rangka mesin: 800 mm Tinggi spindel penggilingan di atas rangka mesin: 160 mm RINCIAN MESIN Kontrol: SIEMENS SIMATIC C7 Tegangan: 400 V, 50 Hz Dimensi & Berat Tinggi mesin: 1.600 mm Berat: 2.400 kg

Kondisi: baik (bekas), Maximum pressure 25t • Axles of 69 and 85 mm • Machine in very good condition, fully serviced Fgjdpfxogqumpo Airjc

Kondisi: baik (bekas), Tahun pembuatan: 1975, Tekanan: 250 t Fgodpfozcc Uhsx Airec Jangkauan: 400 mm Langkah: 30...140 mm Ukuran meja: 1000 x 750 mm Lubang tembus di meja: 360 x 400 mm Luas pelat tekan: 630 x 500 mm Penyesuaian pelat tekan: 110 mm Kebutuhan daya total: 18 kW Berat mesin sekitar: 16 t

Kondisi: bekas, Tahun pembuatan: 1979, en: Technical details: Pressing force: 250 t Ram stroke: 40–160 mm Throat depth: 545 mm Ram adjustment: 110 mm Table size: 1250x800x100 mm Maximum distance between table and ram: 670 mm Drawing force: 16 t Table height above floor: 1000 mm Ram clamping surface: 900x670x100 mm Clearance between uprights: 500x400 mm Total power requirement: 23 kW Machine weight approx.: 16.6 t Machine dimensions: 2.8x1.4x3.7 m Control cabinet dimensions (LxWxH): 1.15x0.6x2.1 m Drawing device: Ejector and blank holder force each 16 t Fjdpfx Asu Nfinsiregc Table with 4 parallel T-slots (1250x800x100 mm) Ram plate with 4 radial T-slots Accessories: - Steel plate 1170x860x80 mm

Kondisi: bekas, Tahun pembuatan: 1981, Technical details: Pressing force: 250 t Ram stroke: 36...126 mm Throat depth: 400 mm Ram adjustment: 110 mm Ram surface area: 630 x 500 x 100 mm Fsdpfx Aisu Nfklorsgc Installation height: 400 mm Table size: 1000 x 750 x 100 mm Table height above floor: 1000 mm Total power requirement: 23.0 kW Approx. machine weight: 13.5 t Control cabinet dimensions (LxWxH): 1.1 x 0.7 x 1.3 m Approx. machine dimensions (LxWxH): 3.0 x 1.3 x 3.3 m Additional features: - Operation via two-hand control stand with foot pedal - 4 base plates Ø 220 mm

Kondisi: bekas, Technical details: Press force: 250 t Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Pass-through opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Accessories: - Base plate 2200 x 1500 x 40 mm Fgjdpfx Aju N Ddwoiroc

Kondisi: bekas, Detail teknis: Tekanan: 160 t Langkah ram: 32...140 mm Jumlah langkah: 50 langkah/menit Jarak jangkauan: 400 mm Ketinggian pemasangan: 400 mm Penyesuaian slider ram: 100 mm Ukuran meja: 1000x750 atau pelat penjepit mm Luas ram: 850x630 mm Lubang pin: 400x360 mm Total kebutuhan daya: 15,5 kW Berat mesin kira-kira: sekitar 10,5 t Dimensi P-L-T: Lemari listrik 1,06x0,6x2,0 m Dimensi P x L x T: P:2,9 x L:1,25 x T:3,3 m Fodpfxeu N Dfhe Airogc - Mode single dan/atau stroke kontinu tersedia - 2 pelat penjepit (1200x760x90 mm dan 1200x760x70 mm, lubang pin Ø=300 mm) - Pengoperasian dengan kaki dan tangan tersedia - Pemeriksaan terakhir dilakukan tahun 2006 - 80A; udara tekan 6kp/cm²; kapasitas oli sekitar 30 liter termasuk.

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Pressing force: 400 t Stroke: 40 - 140 mm Continuous strokes/min: 32 Throat depth: 400 mm Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm Fgodou N A Uuspfx Airoc - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel - No UVV (accident prevention regulations) - As is

Kondisi: bekas, Tahun pembuatan: 1980, fi Fgedpfx Aieu N A U Iorjc

Kondisi: bekas, Detail teknis: Tekanan: 160 t Overhang: 760 mm Langkah ram: 32...140 mm Jarak meja/ram: 400 mm Penyesuaian ram: 100 mm Jumlah langkah: 50 langkah/menit Meja: 760x1000x95 mm Lubang tembus di meja: 400x350 mm Luas permukaan pemasangan ram: 630x850 mm Pelat pemasangan: 760x1010x92 mm Kebutuhan daya total: 15 kW Berat mesin kurang lebih: 6,2 t Dimensi mesin (PxLxT): 2,9x1,2x3,4 m Dimensi panel kontrol (PxLxT): 0,8x0,45x2,1 m Pengoperasian dengan kendali dua tangan Fsdpfx Aou Nfhqjirogc Mesin dapat didemonstrasikan sesuai permintaan. i.D. *

Kondisi: bekas, Technical details: Mounting diameter: 310 mm Weight: 216 kg Dimensions (L x W x H): 0.5 x 0.2 x 0.9 m Connecting rod for mechanical press PEE 250 Trapezoidal thread Ø 146 x 14 mm Fgodpsu Nurxjfx Airsc

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 380 V, gaya penekanan: 160 t, berat keseluruhan: 10.500 kg, gaya punching: 160 t, jenis penyesuaian ketinggian: listrik, Eccentric press ERFURT PEE(II) 160 for sale Fjdpfsyvzzzox Airegc For sale is an ERFURT PEE(II) 160 eccentric press in good condition and ready for immediate use. This is a robust and reliable industrial machine, ideally suited for various pressing, forming, and sheet metal processing tasks. Machines from Erfurt are renowned for their durable construction, stable design, and reliable operation. Therefore, this model is an excellent choice for metalworking companies, fabrication shops, production facilities, or workshops seeking a proven and powerful press. Technical specifications: - Model: Erfurt PEE(II) 160 - Type: Eccentric press - Condition: Good - Operating status: Ready for immediate use The machine stands out due to its solid construction and reliable performance in industrial applications. It is ideal for daily production use and can be used immediately after purchase. If interested, further information, technical details, and additional photos are available upon request.

Kondisi: bekas, Tahun pembuatan: 1989, Press Erfurt dengan kekuatan 160 ton, saat ini dalam keadaan terputus dan sudah dikosongkan, siap untuk transportasi. Fjdpfsxyp Axjx Airjgc

Kondisi: bekas, Rated power 23 kW Fgjdjucgniopfx Airec Rated current 43 A Voltage 400 V For sale is an electrical control cabinet, which originally belonged to a single-column eccentric press, manufacturer Erfurt, type PEE III/160.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: 0-250-08-1590, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.250 mm, jarak lintasan sumbu Y: 1.220 mm, jarak gerak sumbu Z: 125 mm, model controller: Homatic 2000 IPC, jumlah spindel: 28, kecepatan spindel (maks.): 24.000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fgodpfx Ajzcda Soirjc Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Number of tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control unit model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software EQUIPMENT 4 axes Console table 8 manually adjustable supports in X-axis 3 vacuum suction cups per console Vacuum connection for templates Laser positioning aid for suction cups Laser projection for cup positioning Liquid circulation cooling Operating terminal Note: Sale does not include the illustrated adapters, tools, or HSK tool holders.

Kondisi: bekas, nomor mesin/kendaraan: 008557, Area kerja sumbu X: 3050 mm Area kerja sumbu Y: 850 mm Daya spindle utama: 5 kW Fgedpfozcbhgsx Airjc Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 19

Kondisi: bekas, nomor mesin/kendaraan: 008406, max-breite-paneel-1000-max-lange-paneel-2500-anz-injektoren-12 Fedsyl Ihxepfx Airsgc

Kondisi: bekas, nomor mesin/kendaraan: 008205, Arbeitsbereich Achse X: 4250 mm Arbeitsbereich Achse Y: 1320 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 11 KW Anz. kontrollierte Achsen: 4 Achsen Anzahl Bohrspindeln: 31 Anzahl Werkzeugplätze: 22 Fsdjx A Th Rspfx Airjgc