Bandsaw Pehaka - HS 1700 × 1700

Pehaka HS 1700 x 1700

Tahun pembuatan: 2022, Kondisi: baru, Technical data: - Load capacity: 10,000 kg - Dead weight: 850 kg - Admissible workpiece diameter: 50 - 3,500 mm - Roller diameter: 250 mm - Roller width: 160 mm Pedpfx Abefxw H As Iord - Rotational speed: approx. 100–2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Kondisi: baik (bekas), Tahun pembuatan: 1987, diameter putar di atas sled silang: 810 mm, lubang spindel: 130 mm, diameter pembubutan: 1.140 mm, panjang pembubutan: 7.500 mm, gores kuas bulu: 300 mm, panjang total: 7.500 mm, lebar total: 2.300 mm, tinggi total: 1.650 mm, lebar tempat tidur: 600 mm, Please note: these are not original pictures; the machine length is only 3000 mm, not 5000 mm. 3-guideway bed construction 2-axis Heidenhain digital readout Power feed in 3 directions, all tool post slides Central lubrication system Max. workpiece weight, flying in chuck: 2,500 kg Max. workpiece weight, not supported: 8,500 kg Max. workpiece weight, supported: 10,000 kg Optional 4-jaw chuck approx. 1,200 mm Psdsv S Dp Ispfx Ab Ierd Optional 4-jaw chuck approx. 1,500 mm Optional package with 3 fixed steady rests, model from ... to ... Turning length: 5,000 / 7,500 mm Swing over bed Ø: 1,140 mm Swing over cross slide: 810 mm Swing over gap Ø: 1,500 mm Gap length: 2,500 mm Spindle bore: 130 mm Bed width: 600 mm Quill diameter: 130 mm Quill stroke: 300 mm Spindle taper: 6 Mk Power: 25 kW Spindle speed: 9 – 900 rpm Length: 7,500 mm Width: 2,300 mm Height: 1,650 mm Weight: 12,000 kg

Kondisi: siap digunakan (bekas), tinggi total: 3.020 mm, panjang total: 3.300 mm, lebar total: 5.100 mm, kedalaman tenggorokan: 1.060 mm, lintzaag-dubbelkoloms-vertaling-en Prodpjv Sfp Aofx Ab Iod

Kondisi: baru, Tahun pembuatan: 2025, Table length 3000 mm Table width 2000 mm Table height 200 mm Weight 1700 kg Manufacturer: GERD WOLFF Technical Details: • Length: 2000 mm • Width: 3000 mm • Height: 200 mm • Weight: 1700 kg • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against welding spatter • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine laser-engraved scale • Reinforced with welds and ribs on the underside • Optimum working height: 820–865 mm • 8x height-adjustable support legs • Optional matching accessory set available Our welding tables are manufactured using cast quality grade HT 300 and are nitrided as a whole after machining. Additionally, these tables feature a precise fine scale engraved using laser technology. To ensure adequate stability, our welding tables are reinforced on the underside with welds and ribs (see images). Furthermore, they undergo a 3-day gas nitriding process, which increases, among other things, the corrosion resistance, as well as the fatigue and vibration resistance of the tables. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm, which allows for a variable working height from 820 to 865 mm. Other available sizes: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 Prjdpeuia Ntofx Ab Iod • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Images do not correspond to the original size and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D welding table – 3D clamping systems – 3D precision welding tables

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), - BEKAS - PRESS BRAKE CNC 6-SUMBU SINKRONISASI DENGAN CROWNING HIDROLIK SUMBU: Y1 - Y2 - X - R - Z1 - Z2 PANJANG TEKANAN: 3100 mm Pjdpfxjrk Sg Rj Ab Isrd TONASE: 165 ton KEDALAMAN LEHER: 450 mm JARAK ANTAR TIANG: 2600 mm TINGGI TERBUKA: 440 mm GERAK BEAM ATAS: 250 mm KECEPATAN PENDEKATAN: 100 mm/dtk KECEPATAN BALIK: 120 mm/dtk KECEPATAN KERJA: 0-10 mm/dtk DAYA MOTOR: 18,5 kW UNIT KONTROL: DELEM DA 65 BERAT: 12020 kg DIMENSI KESELURUHAN: 4100 x 1880 x 2920 mm CATATAN: Tanpa 2 braket penyangga depan; pengunci alat hidrolik bawah

Kondisi: bekas, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Mach. No. 315 Year of manufacture 1982 Cutting length 3050 mm Cutting thickness 20 mm Backgauge 800 mm, motorized Podpfxsd Hxx Ao Ab Ierd Motor power approx. 30 kW Mains connection 400 Volt, 50 Hz - Backgauge with ELGO position control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for operator protection - 3 material support arms with ball rollers - electric foot switch - spare blade Required space for main machine (L x W x H) 4650 x 2610 x 3200 mm Main machine weight 27000 kg Required space for transport (main machine) L x W x H 4650 x 2610 x 3200 mm Required space for transport (additional) L x W x H 3500 x 2450 x 1400 mm Total weight 27000 kg Mechanically in very good condition Hydraulic issues, electrical control system in need of overhaul.

Kondisi: bekas, Arbeitslänge: 5.500 mm Blechstärke: 13 mm Technische Merkmale: * 3-Walzen-Betrieb * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) Podpfxs Dvlio Ab Ijrd * Hydraulische Halter links/rechts * Hydraulischer Hebeturm * Hydraulische Vorbiegung

Kondisi: bekas, Tahun pembuatan: 2007, Panjang tekukan: 3050 mm Kapasitas pra-tekuk maks: 13 mm Kapasitas penggilingan maks: 16 mm Diameter roll atas: 340 mm Diameter roll bawah: 340 mm Diameter roll samping: 240 mm 4 roll Full hidrolik Penyangga ujung hidrolik Pembacaan digital posisi roll Dilengkapi dengan: Psdsxhgqijpfx Ab Ijrd Dukungan atas Dukungan samping

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, - GEBRAUCHT - ROHRBIEGEMASCHINE ACHEN: 3 MAX. ROHRDURCHMESSER: 30x2 mm ARBEITSLÄNGE: 3000 mm X-ACHSEN-POSITIONIERGESCHWINDIGKEIT: 900 mm/s Y-ACHSEN-BIEGEGESCHWINDIGKEIT: 200 °/s Prjdpjvhc Uuefx Ab Ied Z-ACHSEN-DREHGESCHWINDIGKEIT: 360 °/s MAX. BIEGERADIUS: 20 BIS 170 mm STEUERUNG: DNC800

Kondisi: bekas, Tahun pembuatan: 2006, API-Rohranlage 355 mm x 14 mm (A3801) – Komplettlinie zur Herstellung von Rohren für die Erdölindustrie. Damit bietet diese Anlage eine ideale Lösung für das Wachstum Ihres Unternehmens. API-Rohranlage (Hergestellt in China), Formiermaschine aus Japan - Rohrdurchmesser (AD): 114–355 mm - Wandstärke: 4–14,3 mm - Stahlgüte: N80 Pjdpfx Aov Hcwtjb Ijrd - Rohrlänge: 6–15 m - Standard: API 5CT N80 Lieferumfang: – Spaltanlage – Rohrwalzstraße (Tube Mill) – Zwei Anfasmaschinen (Endenbearbeitungsmaschinen) – Zwei Hydraulische Druckprüfanlagen – 1 Rohr-Richtmaschine – Walzensätze (für AD 114,3 / 139,7 / 219,1 / 273,05 / 323,9 / 339,72 / 355,6 mm) Die Maschine wurde 2006 gebaut und war bis 2016 in Betrieb. Verwendet Schweißnaht-Glühanlage und HF-Schweißer, Marke Thermatool. Gebrauchte Spaltanlage, chinesischer Hersteller. - Materialstärke: 4–14 mm, N80, Q235, warmgewalzter Stahl - Maximale Coil-Breite: 1600–1700 mm - 2+5 Richtwerk, Gleichstrommotor: 55 kW - Spaltmotor, Gleichstrom: 160 kW Lieferumfang Spaltanlage: – Coilwagen – Abwickelhaspel (mit 4 Säulen) – Anpresswalze (Hold-down Roll) – Schäl- und Zuführtisch – 2+5 Richtwerk – Schere – Förderband und Loop – Führeinrichtung – Spaltwerk – Zugspannungs-Einheit – Aufwickelhaspel mit Stützarm – Coilwagen – Ca. 12 Spaltmesser – Schaltschrank, Hydrauliksystem. Die Spaltanlage ist für die Rohrproduktionslinie vorgesehen.