Pabrik pelet

Peletto PLT-300

Tahun pembuatan: 2022, Kondisi: baru, Aluminum angled conveyor with substructure Conveyor length: 1000mm horizontal + 2400mm inclined Incline angle at bend: 45° Discharge height: approx. 2000mm Height of horizontal section: 300mm top edge PPU transport belt, FDA food compliant Conveyor belt EM 15/2 0+17 PU blue 7 white Belt width: 400mm T20 cleats welded on, spacing 202mm * Antistatic thanks to conductive threads in the running side fabric Endless welded with stepped finger splice 30mm high corrugated sidewalls on both sides, high-frequency welded * Edge-free zone on both sides for belt guidance on the incline Cross arrangement: -70/+35/-5/+190/-5/+30/-70mm Giedpfx Ahoht U Tde Rep Full-surface support plate Drive: Motor approx. 0.25kW Belt speed approx. 0.3m/sec Connection 220/400V, 50Hz, protection class IP54 Our core competency lies in delivering exactly what the customer truly needs. We work with our customers to develop tailor-made, individual solutions and supply the corresponding systems from our own production. Please feel free to contact us by phone as well to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems.

Tahun pembuatan: 2010, jam operasional: 29.000 h, Kondisi: sangat baik (bekas), DE27699 Giodsxykcgepfx Ah Rop

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, daya: 160 kW (217,54 hp), tegangan masuk: 380 V, masa garansi: 12 bulan, tahun perombakan terakhir: 2023, Perlengkapan: dokumentasi / manual, 1 Pellet press brand: Buhler DPAB Die inner diameter: 660 mm Die running surface: 138 mm Press is equipped with 1 motor, 160 KW. Press door is made of stainless steel and features an overload flap in the door. 2-roller pellet press with 2 rollers on the press, overhauled in either a dimpled or grooved design. Press is complete with die lifting device and tools included. The press has been fully refurbished and fitted with new bearings and wear parts, such as front and rear scrapers, die retaining ring, etc. Gisdpforah Evex Ah Rep Also fitted with new V-belts. All safety requirements will be observed and suitable switches for friction protection, door safety switch, and inspection hatches will be installed.

Kondisi: bekas, de Gedpeit I Rtofx Ah Roip

Kondisi: baik (bekas), Tahun pembuatan: 2014, Pelletpresse Hersteller – TEKNO UNO Gijdpfovdrtxex Ah Rop Modell – TK 304 Baujahr – 2014 Motorleistung – 50 kW Kapazität – 450 kg/h

Kondisi: sangat baik (bekas), Three-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable horizontal table (workpiece), stationary working head Control (BiesseWorks software), with separate electrical and control panel Working head safety enclosure, safety tread mats Entry support table (workpiece support) No. 2 workpiece clamping vices within the working area Exit table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) Gsdpfxewb Alle Ah Rsip

Kondisi: bekas, Tahun pembuatan: 1997, - Edge banding unit Gjdpfxod Inkto Ah Roip - Cross-cutting unit - Milling unit - Fine milling unit - Scraper - Buffing unit

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1630, berat keseluruhan: 7.800 kg, masa garansi: 6 bulan, daya: 85 kW (115,57 hp), Complete production line for sale based on Di Più BRIK MB100 briquetting press (complete production line). General overhauled machine DI PIU BRIK MB100 (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. The unit was recently overhauled at the Di Piu factory, where all vital parts, cables, wiring, and necessary electrical components were replaced. As a result, the machine is as good as new and comes with a 6-month factory warranty from Di Piu. The machine can produce briquettes with or without a hole, 90mm to 110mm in diameter, from softwood or hardwood, round or square. Inspection is possible at the Di Più factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. Ideal input material moisture content: 8% – 12%, particle size: 1 mm – 12 mm. Technical data: -Production capacity: 1,300 – 2,300 kg/h (with sawdust density of 160–200 kg/m³) -Briquette diameter: 90 – 110 mm -Main motor power: 75 kW Gjdpfxewrp Ems Ah Rsip -Total installed power: 98 kW -Piston compression pressure: 2,000 – 2,500 kg/cm² -Vertical auger with gear unit: 5.5 kW -Oil pump: 1.5 kW -Oil pump for closing extrusion head: 1.5 kW -Feeder with auger and adjustable speed: 1.5 kW -Oil lubrication system for bronze bearings: 100 liters -Briquette output monitoring sensor (automatic shutdown if the material runs out) -Safety covers for moving parts -Oil pressure sensor -Control cabinet -Buffer hopper for input material (accumulator) -Level sensor for feed system monitoring -Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with rotary cutter with 2.2 kW geared motor, mounted on robust steel frame. Material feeding controlled by level sensor. - Post-extrusion briquette cooling line, total length 20 meters - Automatic briquette saw - The saw automatically cuts the briquettes to lengths preset by the operator. - Device for producing briquettes with a hole - Head-cooling system with ice water - The system produces 50 liters/minute of ice water for efficient briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank holding the immersed water-coolant heat exchanger. - The heat exchanger is a high-efficiency “fin-pack” type, made from copper pipes and aluminum fins. - Water tank capacity: 800 liters - Water supply pump (50 l/min – 20 mWc – 0.55 kW) with three-way DN25 valves for adjusting coolant temperature in the briquetting head. - Digital electronic temperature controller with NTC sensor (probe d.6 × 52 mm, IP68, AISI 316). ADDITIONAL: NOVAPAC Wrapper Option to purchase a NOVAPAC wrapper, fully compatible with Di Più BRIK MB100 and other machines, an ideal solution for automatic packaging immediately after compression. Year: 2013 Price for Novapac: €19,000 Equipment shown in the last 6 images.

Kondisi: baik (bekas), Jaw opening: 150x80 mm Gedpfsfhnv Ijx Ah Reip 2 rotor blades (95 mm)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12786 040, berat keseluruhan: 20.000 kg, diameter rotor: 640 mm, panjang total: 4.900 mm, tinggi total: 2.600 mm, lebar total: 4.100 mm, lebar rotor: 2.000 mm, daya: 203 kW (276,00 hp), kecepatan rotasi (maks.): 340 rpm, arus masuk: 415 A, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The Vecoplan VAZ 2000 M F-T is a powerful single-shaft shredder. This robust machine offers an efficient and reliable solution for a wide range of applications. Applications: Gedjurkc Rspfx Ah Rjip - Household waste - Plastics - Paper With its proven technology and high throughput capacity of 4-5 tonnes per hour, the VAZ 2000 M F-T is the perfect choice for size reduction and volume minimization in waste management and recycling processes. Please note: The images shown are for illustrative purposes only. They do not depict the actual machine offered, but serve merely as examples of how the machine might look after refurbishment. Price on request.