Mesin penggiling profil

PETEWE PFS 30

Tahun pembuatan: 1983, Kondisi: siap digunakan (bekas), It was used for reworking profile rolls for a hot rolling mill, was regularly maintained, comes with accessories, without spare parts, on-site inspection is possible, no videos available. Njdpforiwfiex Ahwjwc

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: Nodpfx Asrz Nflohwjwc The main assemblies will be repainted, the rest of the machine retains its original paintwork Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Kondisi: sangat baik (bekas), CNC bubut DMG CLX 450 V3 tahun 2018, kontrol Siemens, kondisi sangat baik. Nsdpfx Ahsx Hqh Sowewc

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: belum diuji, Abstand zwischen den Spitzen: 650 mm Nwodpfx Aswu Tdfehwoc Innen- / Außenschleifen 2-Achsen SONY Digitalanzeige Kühlmitteltank

Kondisi: bekas, Tahun pembuatan: 1992, en-GB:Technical Details: Spindle diameter: 100 mm X-axis travel: 1,500 mm Y-axis travel: 1,450 mm Z-axis travel: 930 mm W-axis travel: 506 mm B-axis (table): 360° Control system for programming: HdH TNC 407 Tool holder: SK50 Spindle speed: 5 – 1,600 rpm, stepless Table load capacity: 4.0 t Table size: 1,100 x 1,400 mm Table rotatable: 360° Feed rates (X/Y/W/Z axis): 2 – 2,000 mm/min Rapid traverse (X/Y/W/Z axis): 5,000 mm/min Total connected load: 40 kW Electrical cabinet dimensions: 2,000 x 600 x 2,000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Approx. machine weight: 14 t CNC drilling and milling machine with hydraulic unit Equipment: - Touch probe - Electronic handwheel - Hydraulic weight compensation for Y-axis - Universal milling head - Various accessories available—please enquire! Nwsdpfsu Idqbex Ahwoc Subject to prior sale.

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 Nwjdpocc D Ddsfx Ahwoc General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: bekas, Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C3300, panjang penggilingan: 4.500 mm, lebar penggilingan: 300 mm, panjang meja: 4.500 mm, lebar meja: 300 mm, kebutuhan tinggi: 2.500 mm, persyaratan ruang panjang: 13.700 mm, lebar yang dibutuhkan: 2.500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Grinding length: 4500 mm Grinding width: 300 mm Workpiece height: 250 mm Table or grinding arm swivel range: ±90 degrees Segment head diameter: 560 mm Spindle diameter in front bearing: 120 mm Swivelable: 2° Max. torque: 719.5 Nm Motor: B280, 55 kW Grinding spindle speed range: 0–730 rpm Nwedpfxjtqtn De Ahwjc Control: BBC Baumüller drives Marposs measuring system Hydraulic clamping Grinding mist extraction unit: Hydrocyclone cleaning system Additional grinding unit ZU Feed rate: 2000–35000 mm/min Space requirement approx. 13.7 x 2.5 x 2.5 m

Kondisi: bekas, Tahun pembuatan: 1977, Surface grinding machine, manufacturer: Okamoto, model: PSG-63UA, year of manufacture: 1977 Magnetic chuck: 600 mm x 300 mm. Grinding capacity: longitudinal 630 mm, cross 310 mm, height 350 mm. Ready for operation. Nwsdpfxsiz Tmko Ahwjc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, CNC plano-milling and boring machine – quill with rotary-traverse table Manufacturer: SKODA / Model: W200 Base unit year: 1986 / Retrofit to CNC by SKODA in 1999 The machine can be inspected by appointment. Technical specifications: Travel paths: - X-axis: 8,000 mm - Y-axis: 4,150 mm - W-axis: 2,000 mm - Z-axis: 1,600 mm Spindle: - Spindle diameter: 200 mm - Tool taper according to DIN 2080 AD, ISO 60 - Spindle speed: 0.0 – 930 rpm - Spindle drive power: 77 kW Boring and rotary-traverse table: - Manufacturer: SCHARMANN - Table clamping surface: 6,000 x 4,000 mm - V-axis: 2,000 mm - Max. table load: 80 t Nwodpjwxyxqofx Ahwsc - B-axis: 360°, indexing: 0.001° Equipment: - CNC control: SIEMENS Sinumerik 840 CE - Chip conveyor - ... No guarantee on completeness or accuracy of technical information or equipment details. Subject to prior sale. A detailed technical data sheet and information about the equipment are available on request.

Tahun pembuatan: 2001, Kondisi: bekas, Detail Teknis: Perjalanan-x: 400 mm Perjalanan-y: 300 mm Nwodpfxoikbtne Ahwec Perjalanan-z: 500 mm Luas bidang penjepit meja: 400 x 300 mm Kapasitas beban meja: 50 kg Kontrol - semi otomatis: LASERSOFT 3D Daya laser: 100 W Total kebutuhan daya: 27 kVA Berat mesin kira-kira: 2,5 t Kebutuhan ruang kira-kira: 3 x 3,5 x 2,8 m Mesin Laser CNC untuk Gravir/Penandaan/Kontur Sekitar 9.000 jam menyala, sekitar 5.500 jam kerja