Pilar slewing crane Slewing crane Kerekan tali

Pfaff Kran Drehkran Hallenkran 3,5m Demag 250Kg 3,5m Druckluft Seilzug

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, tinggi pembubutan: 3.000 mm, berat benda kerja (maks.): 30.000 kg, diameter pembubutan: 3.500 mm, daya: 100 kW (135,96 hp),

Kondisi: baru, Tahun pembuatan: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Guodpfx Aji Ar Ruoabea Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Max. table load: 1,500 kg

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: A-07/471A, Maximum sheet width: 130 mm Straightening roller diameter: 40 mm Gedpfxjcxxx Ro Aabjua Number of straightening rollers: 5 Feeding rollers: 2+2 Minimum sheet thickness: 0.4 mm Maximum sheet thickness: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6 x 0.65 x 1.15 m Strip straightening machine with integrated infinitely variable VARI drive, reversible (forward and reverse operation), mode selector switch for manual and automatic operation, entry roller basket, analog display for roll position indication, roll position adjustment via handwheels, automatic loop control, in very good condition.

Kondisi: bekas, Clamping plate - table of a long planing machine - Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M 30 Gsdpfx Aebn Amfoabjua T-slot pitch: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t

Tahun pembuatan: 1999, Kondisi: bekas, KAPAZITÄT 2000 kg HUBHÖHE 4,7 m & 5 m ARM-LÄNGE 3,2 m 2 STÜCK Godpfswa I A Tsx Aabsua

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), - BEKAS - MESIN FRAIS CNC KOLOM BERJALAN DENGAN MEJA PUTAR DAN BERGESER GERAK MEMANJANG: 8000 mm GERAK MELINTANG: 1500 mm GERAK VERTIKAL: 2500 mm KECEPATAN RAPID L-T-V: 35 m/menit UKURAN MEJA: 2000 x 2000 mm Gsdpfx Aaowl R Agjboua GERAK MELINTANG MEJA: 1500 mm BEBAN MAKSIMAL: 15000 kg KEPALA: SUMBU A/B OTOMATIS; KONTINU; ISO 50; 7000 rpm; 49 kW; 1180 Nm MAGAZIN TOOL: TIPE RANTAI; 80 POSISI UNIT KONTROL: HEIDENHAIN iTNC 530 AKSESORIS: KONVEYOR SERBUK; LASER TOOL SETTER; HANDWHEEL PORTABEL CATATAN: DENGAN MEJA PUTAR 1500x1500 mm; BEBAN MAKSIMAL 15000 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. Guedpfx Aajvf E Avsboa We assume no liability for the technical details or possible errors.

Tahun pembuatan: 2004, Kondisi: baik (bekas),

Tahun pembuatan: 1971, Kondisi: sangat baik (bekas), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Max. pulling force: 16 t Godpfx Aehpqqujabeua Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Weight: 4.8 t

Kondisi: sangat baik (bekas), Motor-driven NC rotary table Guedjfk R Tdopfx Aabea Infinitely variable rotary table (indexing 0.001°) Integrated pallet station: pallet changer table (2 pallets) Manufacturer: Rückle Model: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm Clamping slots: 7 units Slot size: 22 H7 mm Slot pitch: 160 mm Position measurement is performed via an ROD 250 rotary encoder. Condition: Very good (used) Optionally available with machine base (travel path = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization