Pabrik membosankan meja

Pfeiffer 75

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, lebar total: 3.500 mm, panjang produk (maks.): 5.000 mm, jumlah sumbu: 6, This 6-axis FRONIUS UR10 robot from the e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional features include a 4000 mm linear axis, a rotary/tilt axis with a load capacity of 250 kg, and a torch holder. Ideal for advanced welding applications. Contact us for further information about this machine. Additional Equipment: Fedjx D E Huspfx Am Segc • Robot control and teach pendant • Bumper (remote protection) and protective film for the teach pendant • Multifunctional flange for magnetic mounting on the torch neck • Balancer system for hose management • weldControl URCap software • TOUCHSENSE CAP – component search using welding wire or gas nozzle • CAP component OFFSET – for shifting and copying programs • operate: quick start buttons (Start / Stop / Reset / Emergency stop, speed potentiometer, selector switch for 2-station operation) • slideONE: 4000 mm linear axis for universal robots with an effective robot stroke of 1600 mm • RotateTWO 250: external rotary/tilt axis for the robot with a load capacity of 250 kg, including standard product with octagonal plate (16 mm bore pattern) and table SW 600x50 • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barrier (safety PLC for 2-station operation) Machine Benefits Technical Advantages • Maximum reach: 1300 mm • Welding technology: holdONE = torch holder including integrated freedrive button, Fronius CMT torch • Ergonomic holder for the teach pendant • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools and 3 cabinets shown in the images are included in the scope of delivery. Additional Information Machine still powered on.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Voortman V613 / VB1050 Split-System CNC-Bohr-/Sägelinie – Baujahr 2012. Drehbare Spindel. Automatischer Werkzeugwechsler. 24 Meter Einlauf zum VB1050. 24 Meter Auslauf zur V613 CNC-Bohrlinie. 24 Meter Auslauf. Rollenförderer. VACAM CNC-Steuerung. Kurzstückausschleusung. Fgodpfx Ajv U Ea Hjm Soc

Tahun pembuatan: 1960, Kondisi: baik (bekas), nomor mesin/kendaraan: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and 300 mm center of gravity offset: 10 t Load capacity with vertical faceplate position and 830 mm center of gravity offset: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed hydraulically infinitely variable: 0.025 - 0.75 rpm Tilting range: 0 - 135° Fgedpscblc Sefx Am Sjc Tilting time for full range upwards: 140 s Tilting time for full range downwards: 120 s Hydraulic drive: 380 V Height of tilting axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Kondisi: bekas, Tahun pembuatan: 1965, Tersedia dua unit WMW SU 315x3000, daya sambungan mesin 1/2: 12,6/12 kW, berat mesin 1/2: 8,2/9 t, sebaiknya direkondisi. Fedpfexg Ihgox Am Sogc

Kondisi: baik (bekas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre height: 125 mm Centre distance: 400 / 700 / 1025 mm Maximum longitudinal slide travel: 400 / 700 / 1000 mm Longitudinal Slide Table speed: 50 – 5000 mm/min Reversal delay: 0-6 s Minimum automatic feed: 1.5 mm Maximum travel: 400 / 700 / 1020 mm Maximum table swivel angle: 12 / 30 / 78° Cross Slide Swivel range: ±45° Rapid traverse: 40 mm Handwheel feed travel: 20 mm Maximum plunge depth: 1.7 mm Fedpfx Amevca Ize Sogc Grinding Spindle Headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Rotational speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece Spindle Headstock Swivel range: 0 – 90° Speed range: 30 – 675 rpm Mounting taper: Morse 5 Collets: W25 Tailstock Mounting taper: Morse 3 Quill stroke: 30 mm Total power requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or currency of the information provided.

Kondisi: bekas, Tahun pembuatan: 1974, Maximum wheel diameter - 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustability 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 rpm Table size 400 mm Table bore 125 mm Mounting height between table and shaping head min./max. 190/290 mm Fixed outreach from shaping spindle 250 mm Axial travel of the table approx. 295 mm Number of teeth approx. 12 - 150 Feed range tooth depth 0.01 - 0.063 mm/stroke -"- Rotary feed at tool diameter 125 0.125 - 3.150 mm/stroke Spindle/Total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Fgsdpfet Hww Dsx Am Sjc Accessories / Special features: " Hydrostatic linear guide with separate hydraulic unit, " built-in intermediate plate 100 mm to raise the shaping head, " hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and for workpiece internal clamping, various clamping chucks for different workpiece diameters " stepless stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master), " automatic stroke rate change and automatic feed change for ROUGHING and FINISHING in up to 3 cuts, " automatic and motorized shaping stroke locking in upper position after finishing operation, " separate control cabinet and control panel, " integrated coolant unit with chip conveyor and magnetic separator, " approx. 20 change gears, Condition : satisfactory to good, demonstration-ready shortly Delivery : ex stock – as inspected Payment : strictly net – payment upon receipt of invoice

Kondisi: baru, Tahun pembuatan: 2024, nomor mesin/kendaraan: 302340, Section rolling machine Manufacturer: KB Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase. Fgjdpfxed S Uf So Am Sec

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, MODELU.M. TG20/2500 CNC SIEMENS 840 C DIAMETER PEMBUBUTAN 2500 mm DIAMETER MEJA 2000 mm TINGGI PEMBUBUTAN 2000 mm MAX. BERAT DI MEJA 20000 kg MAKS. KECEPATAN MEJA 2-250 rpm PENUKAR ALAT 10 PCS Fodpsxwp D Djfx Am Segc MOTOR MEJA 60-100 kW Sumbu C PENAMPANG RAM 250x250 mm FEED CEPAT 10000 mm/menit KECEPATAN MILLING 0-4000 rpm ALAT-ALAT BERGERAK BOBOT 46000 kg

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat pada poros engkol: 1.100 mm, berat benda kerja (maks.): 180.000 kg, panjang penggilingan: 11.000 mm, diameter roda gerinda: 1.066 mm, panjang total: 11.700 mm, jarak gerak quill: 11.700 mm, berat benda kerja di antara senter: 180.000 g, jarak antara pusat: 11.700 mm, POMINI CNC-rundslipmaskin Modell HD-425-2-7L Siemens 840D, 12 axlar. Tillverkningsår: 2006. Två plansystem, slip- och arbetsstyckvägar är åtskilda. Maskinprecision: Räthet: 0,001–0,002 mm/m Rundhet: 0,001–0,002 mm Excentricitet: 0,002 mm Profil för kröningshöjd upp till 0,1 mm ±0,002 mm/m Ytfinish utan vibratoch matningsspår efter finslipningsfas. På oberoende bädd: Automatisk kaliper, diameter 870–2.250 mm Virvelströmsgivare för sprick- och skade-detektering Ultraljudsgivare för djupmätning till 180 mm Högtrycks hjulrengörare Hjulets dynamiska balansering elektromagnetisk, automatisk eller manuell Hjuldresseringsutrustning med diamant 2 hydrostatiska stöd Fjdowdmy Sepfx Am Segc 2 hydrodynamiska stöd 4 mjuklandningsenheter för valsar Snabbväxlingsanordning för hjul inkl. motor Svängkran Vibrationsmätning och registrering på: Spindelfäste Nackstöd Fotstock Sliphuvud Sliphuvud, bakre Vagn, sidled Arbetskapacitet: Slipning längd: 11.000 mm Max diam med 1.066 mm slipskiva: 2.200 mm Min diam med 1.066 mm slipskiva: 800 mm Centrumavstånd: 11.700 mm Max valsvikt: 80 ton Max valsvikt med stöd: 180 ton Min avstånd mellan skivcentrum och valsaxel: 845 mm Max avstånd mellan skivcentrum och valsaxel: 1.635 mm Vagnaxel Z, hydrostatisk Matningar, steglöst: 0–6.000 mm/min Oljetjocklek: 0,020 mm Avstånd mellan vagnens banor: 1.500 mm Banbredd: 160 mm Total vagnslängd: 3.385 mm Sliphuvud på vagn, axel X; Hjulgivare axel A; Inspektör axel A1; Sliphuvud tvärrörelse kulskruv, axel X: 940 mm Upplösning axel X: 0,0001 mm Hjulspindel längd: 1.695 mm Spindellager, hydrostatiskt, diameter: 254 mm Upplösning inkörningsmikrometer, axel X: 0,00001 mm/indelning Kontinuerlig hjulmatning, U-axel på radie: 0–0,35 mm/min Snabb hjulmatning axel X: 0–830 mm/min Hjulmotor, AC: 130 kW Hjulhastighet: 400–1.100–1.600 v/min Skärhastighet, hjul: steglöst Omslipning hjuldiameter 1.066 mm: 45 m/s Omslipning hjuldiameter 670 mm: 45 m/s Hjulhål, diameter: 508 mm Hjulbredd: 76–152 mm Hjuldiameter: 670–1.066 mm Kröning, axel U: Max krön på diameter: 10 mm Max konkavitet på diameter: 10 mm Huvudspindel: Arbetsstyckets rotationshastighet: 5–50 v/min Huvudspindelmotor: 200 kW Max överförbart vridmoment: 76,5 kNm Planvastyrning: V-remmar Max centrumdiameter, metrisk typ: 160 mm Pinolslag: 150 mm Längd huvudspindel: 3.110 mm Bakdstock: Pinoldiameter: 260 mm Pinolslag: 750 mm Max centrumdiameter, metrisk typ: 160 mm Tapp: metrisk 5% på diameter Bakstockens längd: 1.300 mm Slaglängd bakstock: 8.000 mm Kaliper, armsaxel C, vagnsaxel V, rotationsaxel B: Max mätbar diameter: 2.250 mm Min mätbar diameter: 870 mm Maskinmått: Maskinvikt: 130 ton Längd: 19,5 m Bredd: 5,5 m Höjd: 3,2 m Fundamentdjup: 3,8 m

Tahun pembuatan: 1940, Kondisi: bekas, Automatic universal gear hobbing machine for the production of spur gears and worm gears Maximum hobbing diameter: 120 mm Minimum hobbing diameter: 5 mm Fgjdpfxokw T Rms Am Sjc Smallest module: 0.30 Largest module: 2 mm Maximum hobbing length: 100 mm Complete with all accessories