MAZAK INTEGREX 200 IV S

Mazak INTEGREX 200 IV S

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 995 mm, diameter pembubutan: 660 mm, kecepatan spindel (min.): 35 rpm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 1.045 mm, kecepatan rotasi (maks.): 12.000 rpm, saluran batang: 65 mm, tinggi total: 2.597 mm, panjang total: 3.820 mm, lebar total: 2.348 mm, hidung spindel: A2-6, berat keseluruhan: 9.570 kg, Dengan ini, kami menawarkan mesin bubut dan frais CNC yang terawat dengan baik ini. Ini adalah mesin Mazak Integrex 200-IV S, buatan tahun 2010, dengan kontrol Mazatrol Matrix. Data teknis: Diameter bubut: 660 mm Panjang bubut maks.: 995 mm Diameter batang: 65 mm Pergerakan sumbu X: 580 mm Pergerakan sumbu Y: 150 mm Pergerakan sumbu Z: 1.045 mm Pergerakan sumbu W: 1.490 mm Pergerakan sumbu B: -30 hingga 210° Spindel utama dan spindel belakang: 5.000 rpm Pengindeksan sumbu C untuk kedua spindel: 0,001° Spindel frais: 12.000 rpm (Capto C6) Bwjdoz Ndu Eepfx Abpjw Majalah perkakas: 40 posisi perkakas Kami dapat membayangkan bahwa Anda mungkin memerlukan informasi lebih lanjut atau ingin memeriksa mesin ini. Jika demikian, silakan hubungi kami dengan memberikan informasi perusahaan Anda, agar kami dapat menghubungi Anda. Tentang Mamach Machinehandel: Dengan pengalaman lebih dari 40 tahun dalam bisnis mesin CNC, kami sekarang menjadi salah satu pemasok terkemuka mesin pengolahan logam di Eropa. Keberhasilan kami didasarkan pada kualitas tinggi, layanan yang berorientasi pada pelanggan, dan jaringan internasional yang kuat. Temukan berbagai penawaran kami untuk mesin bubut CNC bekas dan pusat pemesinan – kami akan dengan senang hati memberikan konsultasi pribadi!

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 4 MAIN SPINDLE - Spindle nose: A2-8 - Spindle speed: 3,000 rpm - Max. bar diameter: 80 mm - Max. machinable diameter: 300 mm - Max. diameter over bed: 520 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle speed: 6,000 rpm - Max. bar diameter: 53 mm - Minimum C-axis resolution: 0.001° - Travel: 520 mm TURRET Bsdpfx Ajuhbnnsbpjww - Number of positions: 12 - Travel X/Z: 230 / 460 mm - Driven tool speed: 4,500 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 22.5 kVA WEIGHT AND DIMENSIONS - Footprint: 3,050 x 1,860 mm - Machine height: 1,850 mm - Machine weight: 5,500 kg EQUIPMENT - Control: OSP-P300L-R - Coolant tank * with high-pressure pump - Chip conveyor - Parts remover - Parts conveyor belt - Bar feeder: Top Automation FU352 - Fire suppression system * * NB: Functionality not guaranteed. To be inspected by a qualified company appointed by the buyer.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, produsen pengendali: MAZATROL, model controller: MATRIX, Mesin bubut horizontal Mazak QTN 250 M X 1000 3-sumbu ini diproduksi pada tahun 2010. Jika Anda mencari mesin bubut berkualitas tinggi, pertimbangkan Mazak QTN 250 M X 1000 yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. Keunggulan mesin Keuntungan teknis mesin Bwjdpfsyalpcox Abpsw • Kapasitas maksimum: 640 • Kecepatan rapid traverse sumbu X: 36.000 / sumbu Z: 36.000 / sumbu C: 555 • Diameter benda kerja maksimal: 380 • Panjang benda kerja maksimal: 600 • Kapasitas bar: 76 • Dimensi self-centering (spindel utama): 250 • Stroke: 1000 / cone: CM 4 • Tangki pendingin: 300 l

Kondisi: siap digunakan (bekas), Angeboten wird eine gebrauchte hochpräzise Studer S35 CNC-Rundschleifmaschine. Spitzenweite: 1000mm, Spitzenhöhe: 175mm, Umlaufdurchmesser max. ca. 350mm, Werkstückgewicht: ca. 80kg, Auflösung: Messsysteme Glasmaßstäbe Bereich 0,0001mm 0,1µm. Besichtigung nach Absprache möglich. Bodpoykuucsfx Abpoww

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg Boder A Hcbjpfx Abpoww General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: baik (bekas), Tahun pembuatan: 2009, Suku cadang yang ditunjukkan dengan tangan tidak termasuk. Data teknis ditampilkan pada gambar. Bwedpfxjzk I R As Abpsw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Okuma GENOS L200E-MY CNC Lathe Bwsdpfxsy R A N Aj Abpsw Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected Load: 15.3 kVA Rated Current: 25.6 A Short-Circuit Resistance: 2.5 kA Max. Turning Diameter: Ø 200 mm Max. Turning Diameter x Length: Ø 200 x 380 mm Swing Over Bed: Ø 450 mm Swing Over Cross Slide: Ø 300 mm Workpiece Weight (one-sided support): 120 kg Spindle Diameter: Ø 100 mm Spindle Nose: JIS A2-6 Spindle Bore: Ø 66 mm Spindle Speed Range: stepless Spindle Speed: 75 to 3000 rpm Number of Tool Stations: 12 Turret Type: Multitasking V12 Turret Tool Mounting External Turning Tools: 20 x 20 mm Tool Mounting Internal Turning Tools: Ø 32 mm Driven Tool Speed: 6000 rpm Travel Distance Z-Axis: 400 mm Travel Distance X-Axis: 165 mm Travel Distance Y-Axis: 80 mm Feed Rate Range: 0.001 to 1000 mm/rev Rapid Traverse Z-Axis: 25000 mm/min Rapid Traverse X-Axis: 20000 mm/min Rapid Traverse Y-Axis: 10000 mm/min Tailstock Quill Diameter: Ø 55 mm Tailstock Quill Stroke: 80 mm Machine Height: 2040 mm Installation Area: 2120 x 1750 mm Machine Weight: 4800 kg Year of Manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel Paths: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid Traverse: X, Y, Z: 30 m/min Feed Force: X, Y, Z: 3,700 N Resolution: X, Y, Z: 0.0001 mm Rotational Movement of the Motor Spindle – B Axis Rotational Range: -15 – 100° Rotational Range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. Speed: 20 rpm Drive Torque: 750 Nm Hydraulic Clamping: 50 bar Holding Torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100%: 10 kW Power at 25%: 15 kW Rated Torque: 100%: 8 Nm 25%: 12 Nm Speed Range: 50 – 30,000 rpm A Axis (Bar Capacity Ø 40 mm) Spindle Type: A4 Max. Bar Diameter: 40 mm Max. Speed: 35 rpm Drive Torque: Nominal: 112 Nm Max: 238 Nm Resolution: 0.0001° Axis Clamping (A Axis): Pressure: 70 bar Holding Torque: 130 Nm Tool Changer Number of Tool Disks: 2 Positions per Disk: 24 Max. Tool Weight: 1 kg Rotation Speed: 60 rpm Max. Tool Diameter (adjacent positions occupied): 50 mm Max. Tool Diameter (adjacent positions free): 63 mm Max. Tool Length (from spindle nose): 95 mm Secondary Slide Travel Path: 80 mm Feed Force: 1,700 N Tilting Moment: 90 Nm Bsdswv Hnmjpfx Abpoww Resolution: 0.0001° Hydraulic Pressure for Tilting: 100 bar Workpiece Manipulator Pneumatic Vertical Slide Gate: Ø: 25 mm Stroke: 710 mm Linear Stroke per Motor Revolution: 70.4 mm/rev Max. Transfer Speed: 60 m/min Max. Workpiece Weight: 5 kg Max. Manipulator Stroke: 1,120 mm (2×560 mm) Max. Vertical Stroke: 150 mm Part Intake Ø / Length: Ø 32 mm / 100 mm Part Ejection Ø / Length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip Force: 45 N (at 6 bar) Max. Gripper Opening: 14 mm (2×7 mm) Pneumatic Equipment Operating Pressure: 6 bar Hydraulic System Operating Pressure: 95 – 105 bar Coolant System Coolant Tank Volume: 80 liters Chip Tray Volume: 30 liters Kinematic Viscosity in Operation: 10 – 15 cST SCOPE OF SUPPLY Including, but not limited to: - Willemin Macodel W 408 B Machining Center - Extraction unit - Fire extinguishing system - Probe - Coolant system - Oil cooler - Data backup - Complete operating documentation - Exact scope of supply as per photo series No guarantee is given for the accuracy, completeness and timeliness of the information provided.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, jam operasional: 13.600 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 106, Mesin sebagian sudah direkondisi oleh Willemin dengan geometri baru serta spindle pemulihan baru, 6.000 rpm. Bola sekrup baru pada sumbu X-Y-Z. Penyelarasan dan kalibrasi telah dilakukan. Siap untuk produksi. 5 sumbu - Fanuc 31i A5 - HSK40E - maks. 30.000 rpm - Tahun 2008 Negara asal: Swiss (CH) Tegangan: 3x400V / 60Hz; 50 A; 35 kVA Dimensi: 270x200x260 cm Berat bersih mesin: 2.500 kg SPESIFIKASI TEKNIS WILLEMIN MACODEL 508 MT Kontrol: Fanuc 31i A5 Sumbu X: 450 mm Sumbu Y: 200 mm Sumbu Z: 425 mm Sumbu B: -45° sampai +100° Sumbu U: 300 mm Majalah alat: 48 posisi PickUp Spindle utama A: maks Ø42 mm, maks 6.000 rpm Spindle utama C: maks Ø42 mm, maks 3.000 rpm Bwodpfxew T Tlrs Abpsw Spindle motor milling: HSK40E, MAKS 30.000 rpm Kecuali terjadi kesalahan atau kelalaian, informasi teknis di atas diberikan tanpa komitmen atau jaminan.

Kondisi: baik (bekas), Tahun pembuatan: 1997, The HARDINGE CONQUEST T42L, a used 3-axis CNC lathe with live tooling, is a robust and precise medium-sized slant-bed lathe with a turning length of approximately 700 mm, bar capacity of 42 mm, and a 12-position automatic turret with live tools. It features a FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer. Spindle: ASA 5″ Max spindle speed: 4,200 rpm Full C-axis Spindle power: 20 HP Bwjdpfx Abevtrc Sjpew X-axis travel: 172 mm Z-axis travel: 575 mm Machine weight: 4,000 kg Complete with 210 mm AUTOBLOCK hydraulic chuck, tool presetter, programmable tailstock, 2 live tool holders (1 axial and 1 radial), chip conveyor, set of fixed and manual tool holders, and backup disk. Year of manufacture: 1997. CE-compliant and in excellent condition. Also available: CONQUEST T51 model.