Hydromat HW25/12

Pfiffner HW 25/12

Kondisi: bekas, TECHNICAL DATA - Number of stations: 12 - Table indexing: 12 x 30 [°] - Collet type: SCHAUBLIN W25 - Max. clamping diameter: 25 [mm] - Max. workpiece length: 100 [mm] - Supply voltage: 3x 400 [V] - Installed power: 32 [kW] - Machine dimensions: 2700 x 2700 x 2500 [mm] - Weight: 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar loading magazine HYDROMAT 5.07.018-4, capacity 4200 mm - Position 1: Cut-off - Position 2: Longitudinal drilling 30/60 - Position 3: Longitudinal drilling 30/60 - Position 4: CNC turning (2 axes) - Position 5: Turning - Position 6: Radial drilling 30/60 - Position 7: CNC turning (2 axes) - Position 8: Angular drilling 30/60 - Position 9: Radial drilling 30/60 - Position 10: Angular drilling 20/50 Lhsdsuhbwcepfx Aglob - Position 11: Radial drilling 20/50 - Position 12: Longitudinal drilling 30/60 - Ejection between stations 12 and 1 - Workpiece conveyor - Chip conveyor KNOLL 450 K-1/2000 - Coolant tank KNOLL KTS-25-60-T - HP pump: 40 [bar] - Filtration KNOLL VRF 500

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: 1 pengumpan luncur kanan 1 press eksentrik 250 kN 4 unit luncur normal 1 unit luncur sempit Ruang kerja: Diameter kawat: hingga 6,0 mm Lebar pita: hingga 80 mm Panjang penarikan: hingga 520 mm Kapasitas: 10 - 250/menit. Lhsdpfjr D N Eqsx Agljb

Kondisi: bekas, Used vacuum disc rotary evaporator Alfa Laval "Centritherm" model CT-6. Maximum evaporated water capacity approx. 800 kg/h. This is a complete evaporation unit consisting of: 1. Centritherm CT-6 disc vacuum evaporator, mounted on a platform 2. Alfa Laval plate heat exchanger model P2-HL 3. Control panel 4. Feed pump 5. Concentrate pump 6. Condensate pump 7. Vacuum pump Lhjdpfx Aslc Dwvjglsb 8. Interconnecting piping 9. Mounting fixtures for plate and drum disassembly

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 810 mm, diameter putar di atas sled silang: 800 mm, diameter pembubutan: 320 mm, daya motor spindle: 25.000 W, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 73 mm, jarak pergerakan sumbu X: 210 mm, jarak lintasan sumbu Y: 110 mm, jarak gerak sumbu Z: 810 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 50 m/menit, kecepatan rotasi (maks.): 6.000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: 800 mm Swing diameter over cross slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centers: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret axes X1 and X2: 210 mm Turret axes Y1 and Y2: +65 / -45 mm Turret axes Z1 and Z2: 810 mm Head B-axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Motor power (30 min/continuous): 25/22 kW Maximum bar machining diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum spindle speed: 5,000 rpm Motor power (30 min/continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min Lhodpewlvlgefx Aglsb TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank cross-section: 20 x 20 mm Maximum boring bar diameter: 32 mm Turret indexing time (1 station): 0.18 s Maximum speed of driven tools: 6,000 rpm Driven tool power (5 min/continuous): 7.5/5.5 kW DIMENSIONS Installation area with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry-type parts unloading arm • Cutting load management and load monitor system • 1 double radial driven tool holder • 3 axial driven tool holders • 2 external tool holders • 2 double boring bar holders • 2 single radial driven tool holders • 2 internal boring bar holders • 2 Kitagawa BD 208 hydraulic chucks, dia. 210 mm • 1 set of jaws for each hydraulic chuck • Manuals and CE Declaration of Conformity Year of manufacture: 2010

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), A CNC twin-spindle lathe Traub, completely overhauled in 2025, is available. Turning length: 450mm, spindle bore: 65mm, max. speed: 4000rpm, main spindle/sub-spindle power: 18.5kW/11kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed travel: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed travel: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed travel: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12,938h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation available. An on-site inspection is possible. Lodpfx Agsv Scrbslehb

Kondisi: baik (bekas), Tahun pembuatan: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, sub spindle: 12 mm Sub spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Including (list not exhaustive): - Traub TNL 12/7 CNC Lathe - Meyrat high-frequency spindles, 2 pieces - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder Lsdpfx Ast E Dbyeglehb - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of delivery as per photo documentation No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 47.600 h, nomor mesin/kendaraan: 325, System: TX8H Spindle bore: 80 mm Maximum turning length: 750 mm Turning diameter: 340 mm Lhsdpfxsh Dzqls Agleb Power: 22 kW Number of tool holders: 12 Shank diameter: 40 mm Driven tools at all positions X axis Z axis C axis Automatic tailstock Chip conveyor

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), A 3-axis precision milling machine DMG Mori is available. Travel range X/Y/Z: 200mm/200mm/190mm, spindle speed: 40,000 rpm, feed rate: 30 m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4,979h, spindle hours: 1,041h. The spindle was completely overhauled in 2023. An inspection on site is possible. Lodpfxovi N D Sj Agljhb

Kondisi: baik (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: XD-38II-CP-0703-H, diameter putar di atas sled silang: 38 mm, kecepatan spindel (maks.): 6.500 rpm, diameter pembubutan: 38 mm, lubang spindel: 39 mm, daya: 7,5 kW (10,20 hp), The machine can be inspected at our location in Immendingen by prior arrangement. Lhodpevtmalsfx Aglob Included are the original chip conveyor and a bar feeder from FMB, model 3-36 turbo. Also included: Büchele high-pressure unit, type SFB-301, 150 bar, 4 valves.

Tahun pembuatan: 1985, Kondisi: bekas, de-en-20240620-01 Lhodpfetzdyzex Aglob