2019 Unit kontrol suhu PIOVAN THW124-F

PIOVAN THW124-F

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. Gijdofzktzopfx Adtsl All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection Unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping Unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. daylight between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2x 41,330 kg Godpfxow Aw Tae Adtsil Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector Unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and Cooling: Installed power of main drives: 265 kW Hydraulic tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated from the machine control panel Machine in excellent technical condition – latest generation of ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, white goods, technical applications). The machine remains powered and can be tested on site. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operational videos, technical documentation, and arrange a convenient viewing time.

Kondisi: bekas, Tahun pembuatan: 1989, jam operasional: 74.900 h, gaya penjepit: 850 kN, diameter sekrup: 40 mm, berat keseluruhan: 3.700 kg, Machine No. 145464 Year of manufacture: 1989 Machine weight: 3,700 kg (without oil filling) Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Total power: 27.2 kW Machine cycles: 7,112,306 Operating hours: 74,900 h Godpor Hrqrefx Adtsil Interfaces: Host computer, handling, air blow-off, sorting diverter, core pull 1 hydraulic, mold temperature control 3 circuits. The following accessories, etc. are included with the machine: Complete 50 mm thermoplastic injection unit, sorting diverter, hydraulic infeed conveyor (height adjustable in 3 steps, integrated in the control system), external disk drive (original Arburg), documentation and service reports from Arburg Service, machine setup course CMD materials (folder), electrical diagrams, documents also in digital form, oil filling (must be pumped into a container before transport – pump is available), electronic water battery.

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), de2hu-it-lt-lv-nb-nl-pl-001 Gjdpfjtyaypsx Adtoil

Tahun pembuatan: 2026, Kondisi: baru, nomor mesin/kendaraan: 1234, Used for collecting mash prior to the packaging process. With the buffering option, the entire system can operate continuously without interruption, independent of the packaging machine. - Capacity: 600 L - Material: Wnr. 1.4301, AISI 304 stainless steel - Weight: 80 kg Gisdpfx Adeiu Hy Totol - Equipped with floating lid - Level indicator Dimensions: D - Diameter: 565 mm H - Total height: 1095 mm h1 - Tank height without legs: 845 mm h2 - Leg height: 250 mm

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 191523, gaya penjepit: 490 kN, diameter sekrup: 30 mm, -KOM 3086- Offered here is a used injection moulding machine. Giedpfev Tb U Dex Adtol Technical data: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine no.: 191523 Screw diameter: 30 mm Tie bar distance: Tie-barless Locating ring diameter: 125 mm

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 24.210 h, This Dr. Boy injection moulding machine is currently in storage at Plastima Used Machinery. The machine was manufactured in 2007 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 55M Giodpfx Adjtpf N Uetjl – Year of manufacture: 2007 – Screw diameter: 32 mm – Shot volume: 96.5 cm³ – Clamping force: 55T – Operating hours: 24,210

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), Max. throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame stand, level valve, inspection shaft, and documentation. Giedpjh Akm Tsfx Adtel

Kondisi: bekas, Tahun pembuatan: 2019, Year: 2017 Control Type: CC300 Operating Hours: 20,000 H Storage Location: MECA PLASTIC Availability: AVAILABLE Clamping Force: 160 T Opening Stroke: 460 mm Tie Bar Spacing: 520 mm x 520 mm Platen Dimensions: 760 mm x 760 mm Min/Max Mold Height: 250/600 mm Maximum Space Between Platens: 1,060 mm Screw Diameter: 35 mm Screw Length: 20D Shot Volume: 154 cm³ Max Injection Pressure: 2,000 bar Motor Power: 21 kW Godpfx Adev I Uw Istjil Heating Power: 9.2 kW Clamping Unit Weight: 8.4 T Machine Length: 5.90 m Machine Width: 1.70 m Machine Height: 2.20 m Cores: NO Robot Interface: YES Bi-metallic Screw: YES

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), 7 units MOTAN material containers for dryers, 200 liters capacity each, including heating units, year of manufacture approx. 2003. The containers each have their own temperature controller. 8 units available, currently in stock: 7 units. Gedofwx Ebjpfx Adtjil