Garis granulasi

Plastmachines - BKG Nordson PME 100.35

Kondisi: diremaj di bengkel (bekas), Nr. 2587k 1 used granulation line, function-tested, Nljdpfxogbdrqs Abgji Throughput up to approx. 600 kg/h depending on material, consisting of: 1 volumetric dosing unit Plastmachines extruder type PME 100, single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backflush unit included Hydraulics 3 kW Strand die plate with 20 holes, Ø 3.5 mm Strand cooling trough 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 3000 ResoTec control / switch cabinet Inspection possible by appointment – short notice Additional granulation lines / extruders available and ready for demonstration ex-works Wuppertal

Tahun pembuatan: 1994, Kondisi: siap digunakan (bekas), Engine power: 15.5 kW / 19.5 kW, pressing force: 320 kN, specific pressure: 425 kN/m², machine dimensions (L/W/H): approx. 5700 mm / 1900 mm / 1800 mm, weight: approx. 6000 kg. The machine exhibits a malfunction due to moisture and should be inspected. Nljdjip D Rpjpfx Abgei

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, EN-2587k-used-compound-granulation-line-translation Nedjtvfhcjpfx Abgsli

Kondisi: diremaj di bengkel (bekas), 2587k 1 used pelletizing line, function-tested, Throughput up to approx. 600 kg/h depending on material, consisting of: - Volumetric dosing unit Nedpfxsiyy I Nj Abgeli - Plastmachines extruder, type PME 100, single screw Ø 100 mm – 35 L/D - Drive 134 kW – DC - 1x degassing zone - Melt filter BKG type K-SWE 121 RS, backflushing incl. hydraulic unit 3 kW - Strand die head with 20 x Ø 3.5 mm holes - Strand cooling trough 400 x 4000 mm with strand guide rollers - Strand suction unit - Strand pelletizer SG 300 - ResoTec control system / switch cabinet Inspection by appointment – short notice possible Further pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration

Kondisi: baik (bekas), Tahun pembuatan: 1998, SANJO P 270 - 6C Baujahr: 1998 Bahnbreite: 270 mm 6-Farben-Flexodruckmaschine Nljdpfogvg A Iex Abgei 1 x Lackierwerk Abwicklung Aufwicklung Eines der Druckwerke ist für den Rückseitendruck eingerichtet, was bei dieser Maschine sehr selten ist Viele Druckzylinder und Rasterwalzen werden mit der Maschine geliefert DELAM RELAM Spannungsregelung

Kondisi: diremaj di bengkel (bekas), 2587k 1 used pelletizing line, function-tested, Throughput up to approx. 600 kg/h depending on material, consisting of: - Volumetric dosing unit - Plastmachines extruder, type PME 100, single screw Ø 100 mm – 35 L/D - Drive 134 kW – DC - 1x degassing zone - Melt filter BKG type K-SWE 121 RS, backflushing incl. hydraulic unit 3 kW - Strand die head with 20 x Ø 3.5 mm holes - Strand cooling trough 400 x 4000 mm with strand guide rollers - Strand suction unit - Strand pelletizer SG 300 - ResoTec control system / switch cabinet Nlodpfjh Eydmox Abgoi Inspection by appointment – short notice possible Further pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 20.580 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.250 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 450 kg, arus masuk: 59 A, berat keseluruhan: 12.000 kg, tinggi transportasi: 2.750 mm, kapasitas tangki oli: 300 l, daya: 30 kW (40,79 hp), lebar transportasi: 2.300 mm, panjang transportasi: 8.500 mm, kapasitas tangki: 300 l,

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), SINGLE-SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Type: 60 X 33 Nledpfx Aboifgwhogji Year of manufacture: 2000 Screw diameter: 60 mm Drive: 75 kW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, operational The extruder is my property. Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Kondisi: hampir baru (bekas), Set, packed in a wooden crate, screw and barrel for 150 mm extruder, grooved feed section, screw with shear and mixing section Njdpfxedm Aghe Abgsli

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.851 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 500 kg, berat keseluruhan: 17.000 kg, kapasitas tangki oli: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Pressing force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific pressing force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 22 kW Total installed power: 65 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³ approx. 5.5 t/h - 50 kg/m³ approx. 7.5 t/h - 100 kg/m³ approx. 9.7 t/h Bale weights with a bale length of approx. 1.2 m: up to 500 kg (material dependent) PLC control: Siemens S7-1500 Operator panel: Schneider Harmony Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: Nledpfxou Thbxo Abgei - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for processing loose bulk materials of small grain size - OptiCut XS system for reduced cutting force and increased throughput - Special press ram for compacting "difficult" materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive power: 4.0 kW Belt speed: approx. 0.3 m/s Feed belt length: 2,679 mm Inclined belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height (inclined belt): 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN quality N) Total height: 4,515 mm Transport dimensions (overall): 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling line: The entire plant is in very good condition due to its low operating time of only 1,851 pump hours and processing exclusively paper, cardboard, and film. Scope of delivery: - Avermann baler, model AVOS 1410 BS-22/50, incl. wire threading stations and bale chute - Avermann conveyor, model KGF GB 1500 - BOREMA personnel protection system, model APSS iBOR 22 Remarks: Complete documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.