MESIN PEMOTONG PAGAR PVC

PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİ SÇ 301 PVC ÇITA KESME MAKİNESİ

Kondisi: bekas, Dimensions (L x W), mm Weight approx. 90 kg Adjustable height (yes/no): yes Lift: 300 - 800 mm Worktable support surface: 1,700 x 1,500 mm Maximum table width: 3,800 mm Payload approx. 130 kg Ruchser RU-4-SSP Turn-Tip Table ----- Support surface: 1,700 x 1,500 mm, maximum table width (swung out): 3,800 mm, pneumatically tiltable, cut-out for window rebate, equipped with 6 storage bins each with 2 compartments, extendable lower sections for width extension, with 2 support legs and 2 flat clamping cylinders, lift mechanism from 300 - 800 mm, roller conveyor as a setup surface, foldable. Payload capacity 130 kg. Travel gear with 4 swivel castors with locking device (RU-4SSP) Pjdpjvu Hfdefx Ab Iord 2 stops for final inspection and sealing Sash assembly jig with tool shelf and adjustable stop for tilting position for RU-4-SSP Holder for drilling machine, screwdriver gun, etc., with screwdriver holster Travel gear with flanged track rollers RU-DKFA and RU-4SSP 3 double metre travel rail for drive unit 25 x 10 mm ----- Price for the above-mentioned machine upon request! Plus packaging and shipping ----- (Technical data as per manufacturer's specifications – subject to change without notice!)

Tahun pembuatan: 2025, Kondisi: baru, nomor mesin/kendaraan: ALÜMİNYUM TEK KAFALI PENCERE ÜRETİM SETİ, • Enables production of 46 to 60 windows in an 8-hour work environment • Our set offers customers the most competitive price with alternative machine configurations • Available in 380V or 220V options • Complies with CE (European) standards • Delivered worldwide, door-to-door pricing • Existing customers in your country can provide references MACHINE CONTENT • SC 402 ALUMINIUM & PVC Up-cut Saw • SC 542 Aluminium Copy Router Prjdpfjrfy Dwox Ab Iod • SC 201 Aluminium & PVC Mullion Milling Machine • SC 901 S Pneumatic Aluminium Corner Crimper You can increase your production capacity with different machine configurations. Please contact us for the catalogue.

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: PVC TEK KAFALI ÜRETİM GRUBU, • Enables the production of 46 - 60 windows during 8 hours of operation • Our set offers the most cost-effective solution for customers with different machine configuration options • Available with 380 Volt or 220 Volt electrical options • Complies with CE (European) standards • Door-to-door delivery prices available for any destination worldwide • References from our previous customers available in your country MACHINE CONTENTS • SC101 S Single-head corner welding machine or SC111 Professional PVC single-head welding machine with clamp • SC201 Aluminum & PVC transom milling machine (1 blade) or SC211 Aluminum & PVC transom milling machine (2 blades) • SC301 PVC glazing bead cutting machine or SC301 S Aluminum & PVC bead cutting machine (universal – applicable to 12 different beads) • SC401 Aluminum & PVC undercut saw (includes Ø450 mm saw blade) • SC501 PVC handle hole drilling and water drainage slot routing machine Prsdpfsrc H Hfjx Ab Ijd • SC601 PVC corner cleaning machine (3 knives)

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: SÇ 431 Alüminyum Pvc Manuel Üstten Kesim Makinesi, • Complies with CE standards. • The machine is capable of cutting at +45, -45 degrees and intermediate angles. • Quick adjustment stops for 90, 75, 60, and 45 degrees. • Table locking handle for intermediate angles. • Profile clamping operated by pneumatic system for convenient use. • Equipped with a Ø400 mm diamond saw blade. • Standard measurement and transport conveyors are included (2.5 meters on both right and left sides). Pedsramzuepfx Ab Ijrd OPTIONAL • Cooling device for cutting aluminum profiles. • Roller conveyor system (3 meters on both right and left sides).

Tahun pembuatan: 2024, Kondisi: baru, EN Pjdpfx Aeih Sdgsb Isrd

Kondisi: bekas, Tahun pembuatan: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area Drilling/Grooving mm: 0 x 800 / 0 x 800 Stroke of X axis mm: 750 Max. traverse speed of X-Y axes m/min: 25 DRILLING UNIT Vertical spindles: Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis): Number 2 (1+1) Horizontal spindles (along X axis): Number 1 Fixed grooving saw (direction): X Grooving saw diameter mm: 100 Max. saw thickness mm: 5 Motor power kW (HP): 1.5 (2) Psdpfx Abevvi I Rs Isrd Spindle speed rpm: 3350 Grooving saw speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Compressed air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air speed m/sec: 20 Extraction nozzle diameter mm: 80+80 F10L Drilling Unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads: 1 in X direction with one bit, 1 double drilling head in Y direction (1 + 1 Drill chuck D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Workpiece positioning and drive of working unit A CNC-controlled suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along X and Y axes occurs on THK linear guides with transmission via reinforced toothed belts. Movement along Z axis is pneumatic on ball-bushing guides, with adjustable stopper positioning. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and operator language fault messages Programming - Programming via the CN - Automatic optimization of drilling operations - Possibility of panel zero-point shift - Possibility to store and import drilling programs via USB dongle - Ability to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the manuals - Graphical representation of unit configuration Vacuum suction cup "B-Power" Vacuum suction cup with double vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine operating interface Software: Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, min. 2GHz; multicore processor recommended - Memory: Minimum 1GB, 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (Package includes an installation DVD and a USB dongle) Xilog Maestro features Programming - Parametric, graphical programming - Assisted programming with graphic and syntax aids for drilling operations - Ability to create and store machining macros Integrated additional functions - Self-diagnosis and operator language fault messages

Kondisi: baru, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 units S&S electrohydraulic frame press type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment available: central pressure beam, device for angled windows, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner connections optional), CE-certified version The only fully automatic, high-performance frame press, self-adapting and does not require pre-positioning of timber. Width and height adjustments are carried out automatically, without downtime, immediately after direct placement of workpieces into the pressing area. No repositioning of the timber is necessary. Base machine features heavy-duty, welded frame construction, made from oversized, thick-walled special profiles. Guide rails for pressing corners are precision-machined for minimum wear on the pressure beams. Continuous abutment for width pressing on the stop side, unbendable design, mounted on the base frame. Continuous abutment below, highly torsion-resistant design, connected to the base frame and machine interface. Infeed height: 500 mm. All abutments are precision adjustable for absolute angular accuracy and long-term precision. Right sliding carriage with fast, motorized width adjustment, ensuring parallel travel, including automatic hydraulic locking: Central drive for horizontal and vertical size adjustment, with high input and adjustment speed and automatic width and height adjustment (optoelectronic control). 2 vertical double-acting pressing cylinders, piston diameter 50 mm, 250 mm stroke, pressure force adjustable from 400 to 2,000 kg. 2 horizontal double-acting pressing cylinders, piston diameter 40 mm, 80 mm stroke, pressure force adjustable from 250 to 1,250 kg. Predpfxjd Rzc Ro Ab Ied Upper right pressing corners are heavy-duty, milled type, with automatic corner adjustment. Free-floating press corners Contact surfaces feature glue-repellent finish. Abutment and pressure plate depth: 100 mm. 8-way holding and positioning system for fully loose placement of all single timber parts in the pressing area (no prior stacking or plugging required). Each frame component is held and positioned at two points. Automatic lift-up function enables ergonomic placement of the upper cross member even with tall frames, at an operator-friendly height. Improved work safety through ground-level operation—no ladders or steps required. All individual frame timbers are placed directly into the pressing area. Program selection options: manual motorized via pushbutton, fully automatic via optoelectronic size adjustment, including automatic pressing cycle in tandem with a safety light barrier. Automatic, cycle-controlled pressing by impulse signal: vertical pressing – release – horizontal pressing – release – vertical/ horizontal pressing. Control cabinet conveniently mounted to the left on the base frame. Fast, optoelectronic size adjustment. Compact hydraulic system adjustable from 20 to 100 bar. Freely programmable, electric hand controller for efficient operation, particularly suitable for large and complex frame designs (

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, • Conforms to CE standards • Semi-automatic CNC machine designed for cleaning burrs formed after welding of PVC window, sash, door frame, and other profiles welded at a 90-degree angle. • Independent cleaning of the bottom, top, and outer surfaces of the profile • Touchscreen control panel • Easy memory storage functionality • Easily adjustable operating speeds by the user • User-friendly program creation for target profiles via special software • NC control system with PLC unit • Joystick lever for user-friendly Y-Z axis manipulation • Easy program creation and precise adjustment capabilities • Average operation time per corner: 5–8 seconds • Capability to clean 400–500 frames in 8 hours of average operation • Unlimited program storage capacity • Daily and monthly production report display panel Prodpfx Aborbf R Tj Ijd • Equipped with 2 servo motors and 1 Hertz motor • Ø200 mm diamond-toothed saw blade • Capable of making angular and radius cuts on all PVC profiles, with circular interpolation movement • Fore brush table system prevents scratching of profiles and allows smooth movement during operation

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: SÇ 4000 S PLUS Full Otomatik Servo Motorlu Çift Köşe Alüminyum Pvc Kesim Makinası, • Fully automatic cutting machine designed for straight or angled cutting of PVC and Aluminum profiles with a double-head Ø600 mm saw. • Hydro-pneumatic, hydro-check controlled saw movement. • Cutting precision +/- 0.1 mm. • High accuracy thanks to backlash-free gearbox. • Automatic adjustment to two inward angles at 90° and 45°. • 15" Windows-based industrial PC. • Diamond saw blade 2 x Ø600 mm. • Servo motor motion system. • 21.5 cm saw projection distance with a cutting capacity of 3 profiles measuring 70 mm x 3 each. Podpfxeramy Ts Ab Iord • Hydro-check adjustable saw speed. • 9.5 meter cutting capability. • 90° block slicing function. • Multi-language support. • Conveyor profile support unit. • Movement-sensitive support arm. • Profile support unit between cutting heads. • Spray saw cooling system. • 2 vertical clamps. • 4 horizontal clamps. OPTIONAL • Barcode printer. • Transfer of cutting lists via USB memory stick.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of equipment that combines a machine built with state-of-the-art components, high efficiency, and the most competitive price. This machine operates on linear motor technology (magnetic cushion), which ensures long-lasting use. The tool assembly with which the machine is equipped allows for the cleaning of the most common PVC profiles available on the market. The machine's base is a strong, stable frame made from structural steel. The control panel is equipped with a PC-class computer. Standard Equipment: Working Arm: - The working arm is driven by a linear motor (no clutches, gears, racks, or lead screws). The linear motor moves at a set distance from the magnetic strip—no friction! - Linear motors for the "X" and "Y" axes are numerically controlled. Air Cushion: - The working arm, weighing several dozen kilograms, is supported during movement along the "Y" axis by a pneumatic actuator that consistently supplies a predetermined pressure, balancing the arm's weight. This solution enables short cycle times without exposing critical machine components to premature wear. Control Panel: - Independent control panel with a PC-class computer. - Operator menu is mapped to function keys, ensuring ease of use in production environments. - Profile outline corrections can be easily made from the control panel (making an adjustment takes about 1–2 minutes for the operator). Other Features: - Automatic workspace cleaning system - Automatic material clamping and centering - Minimum and maximum profile height (workpiece): 40–150 mm - Minimum and maximum profile width: 40–130 mm - Minimum component size (external): 340x400 mm - VP: Transport packaging BASIC SET OF UPPER UNITS: - working unit for tools for cleaning flat surfaces with groove - working unit for cleaning the bead groove surface - drilling unit for sealing gasket Pjdpfswhu Hhjx Ab Iord BASIC SET OF LOWER UNITS: - working unit for tools for cleaning flat surfaces with groove - working unit for cleaning the sloped bead surface - drilling unit for sealing gasket ADDITIONAL SET OF UPPER AND LOWER UNITS: - working unit with blade for cleaning flat surfaces without groove - working unit with blade for cleaning flat surfaces without groove