Kawat / profil pengelasan garis ekstrusi

PMH GmbH EX 30

Tahun pembuatan: 2026, Kondisi: baru, 30 mm extruder with crosshead for small sheathing projects, complete with cooling tank, caterpillar take-off, and winder equipped with traverse system. Pjdpfx Aef Uc Urebuegg

Tahun pembuatan: 1987, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Asitrade Single Facer E-Flute and B-Flute Year: 1987 – completely overhauled in 2019 Unwinder: 6 stations Max. working width: 1410 mm Max. speed: 150 m/min Core diameter: 100–140 mm Max. reel diameter: 1300 mm Water spray system Pgedpfx Astxlv Hebuog

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: Pgodsqt Dmyopfx Abujg - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: baru, Tahun pembuatan: 2024, Ein Weinbergspfosten-Profiliermaschine wird im Wein- und Obstbau eingesetzt, um Pfähle und Stützen herzustellen. Typischerweise haben Rebpfosten eine Materialstärke von 1,5 bis 2 mm. Die komplette Produktionslinie besteht aus Abhaspel, Servo-Zuführ-Richtmaschine, Presse, Stanzwerkzeug, Profiliermaschine und Schere. Pjdpfxst Tcz Ue Abujgg

Tahun pembuatan: 2024, Kondisi: baru, nomor mesin/kendaraan: H3000-H5000TM,

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Pgsdpfxohigmbj Abuog Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), This is a complete production line for house construction. Prices are listed for each individual item. Consisting of the following components (see the attached document as well): Images to follow; they are already included in the attached document. Table 1 (Laying in and clamping the frame construction) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Laying the first facing layer and fastening) €25,300 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying the second facing layer, fastening, and flipping the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical components and insulation) €34,500 - Cross transport with rollers and facing layer - Table cross travel - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first facing layer and fastening the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying the second facing layer and fastening) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Assembly and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swivel unit - Table cross travel unit - Upper guide for holding wall elements vertically Manual surface portal with vacuum lifter on Table 2 €13,800 (Laying the first facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 3 €13,800 (Laying the second facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 5 €13,800 (Laying the first facing layer on the second side) Pgsdpfxeu D Amge Abuog - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 6 €13,800 (Laying the second facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Wall storage rack 1: 12 m long x 24 tracks €11,500 Wall storage rack 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 Abus spreader beam 2 t €20,125 1 spreader beam 2 t

Tahun pembuatan: 1997, Kondisi: bekas, en-001 Pgedpju Nvbusfx Abusg

Tahun pembuatan: 2009, Kondisi: diremaj di bengkel (bekas), The roller stand is also available for rental (including trial rental). Psdjmk Iktepfx Abuogg Maximum load: 100 t per set, consisting of 1x drive unit and 1x idler unit Workpiece diameter: 500 – 7,500 mm Rotational speed: approx. 130 – 1,250 mm/min Roller material: polyurethane Control: wired hand pendant Additional available options, e.g.: additional idler units, foot switch

Tahun pembuatan: 2024, Kondisi: baru, oris- Extruder MINI ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 min⁻¹ Screw axial pressure [bar]: 300 (continuous operation), 350 (maximum) Drive: Three-phase motor with frequency converter Drive output [kW]: max. 2.5 Reduction gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590* Electrical connection values: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control: electric resistance heating bands with mica insulation Max. processing temperature [°C]: 300 Control cabinet and control panel The electrical installation of the extruder is housed in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the buyer, and a chiller unit for water cooling is not included in the offer. Extruder tooling is not included in the offer. Pgsdehx Elfspfx Abujg