Gergaji bundar logam ringan / aluminium

PRESSTA-EISELE Profilma 510

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Complete saw line consisting of infeed unit, fully automatic circular saw, and outfeed unit Suitable for a wide range of applications, particularly in the photovoltaic and automotive industries. Infeed unit: Horizontal loading magazine Model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Max. material height corresponds to the saw cutting range, round stock max. diameter 130 mm 3 sliding strips between the belts for additional support Profile length: min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele Model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously variable speed control Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 control with touchscreen Reversal device with 5-fold stroke, up to max. 5,000 mm Electronic material feed 3–1,000 mm (single stroke) Cutting gap extension on both sides Pneumatic removal slide Waste flap after the saw for cut-offs / remnants Cut length depending on profile, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust extraction Outfeed: Dkjdpfoxvbvvsx Aktjn Support table area 1,500 mm x 2,500 mm Pneumatic cross transfer slide

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Kontrol elektronik sumbu X Kecepatan pemposisian sumbu X (m/menit): 25 Kemiringan kepala pneumatik Kemiringan eksternal 45°/22° Pengaturan mekanis sudut-sudut antara Feed pisau oleopneumatik Dkedjyv Ag Sjpfx Aktsn Panjang potong efektif (mm): 5.000 Panjang potong minimum standar dengan 2 kepala pada 90° (mm): 310 Diameter pisau (mm): 450 Sensor pengukur

Kondisi: baik (bekas), With extended roller table • Type – SILIKANT – 2500 Dodsuqlc Njpfx Aktekn • Serial number – 7609 1-12 • Year of manufacture – 2001 • Belt size – 100 x 2500 • Roller table (total length) 4.10 m × 0.55 m • Center section – 1.20 m • Sides 2 x 1.45 m • Height – 1.02 m • Price on request

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang total: 30.000 mm, tinggi total: 4.300 mm, lebar total: 6.500 mm, berat benda kerja (maks.): 100 kg, suhu: 220 °C, kapasitas pemanasan: 80 kW (108,77 hp), tinggi benda kerja (maks.): 1.200 mm, panjang benda kerja (maks.): 2.500 mm, bahan isolasi: Mineralwolle 75 kg/m³, ketebalan isolasi: 150 mm, lebar benda kerja (maks.): 800 mm, The continuous system consists of the following components: - Chemical pre-treatment by spraying - Dryer - Powder coating system - Powder curing oven - Conveyor technology (indexed operation) - Electrical control system Dedpfx Akjum Ufletjkn

Kondisi: baik (bekas), Straight edge grinding machine; for grinding and fine polishing of straight edges, mitres, and bevels Specifications: • Glass thickness: 3-25 mm • Min. dimensions: 80 x 120 mm • Max. dimensions: 3 x 3 meters • Mitre angles: 0-60° • Power: 15 kW • Dimensions: length 6.5 meters • Width with water tray: 1.6 meters • Height: 2.5 meters Dsdpfxeu U H H As Aktokn • Feed speed: 0.4 – 4.2 m/min • Weight: 2,600 kg Price on request

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Dodouz If Nspfx Aktokn Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Electronic saw height adjustment Working area, square max.: 170x170 mm Working area, flat max.: 300x150 mm Working area, round max.: 200 mm Saw feed: 0 – 40 mm/s, stepless adjustment Cut length: 5-950 mm (9999 mm with multiple stroke) Feed speed max.: 500 mm/s Weight approx. 1,900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After a comprehensive retrofit, the machine is in like-new condition both technically and visually. Thanks to its features and robust design, it is highly efficient and suitable for a wide range of applications. The programmed HMI control enables easy and highly profitable operation. The soundproof enclosure minimizes noise emissions. The machine is completely overhauled in our facility according to customer requirements. The overhaul includes, among others, the following upgrades: - Conversion to Siemens S7 PLC - Upgrade to Siemens HMI operator interface - Replacement of the ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of wear parts - Refurbishment of the enclosure Additional features: - Soundproof enclosure - Kerf extension (for high-quality cut surfaces without return marks) Dkedpjuiy Hrjfx Aktsn - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor and wear parts are excluded from the warranty. Options: - Multiple clamping device for parallel sawing of several workpieces - Flat magazine for automatic loading of material up to 6 m in length - Roller conveyors for raw material - Reinforced motor 18.0 kW (frequency controlled) - Delivery and installation at your site - Training for your personnel

Tahun pembuatan: 2022, Kondisi: baru, Motor-driven guillotine shear MS 1303 Dsdpohk Nfuefx Aktskn Technical data: Sheet width: 1350 mm Sheet thickness: 3.0 mm Frame opening: - Table width: 400 mm Working height: 850 mm Control: conventional

Kondisi: baru, Cutting diameter: 255 mm Saw band length: 2765 x 27 x 0.9 mm Table height: 950 mm Cutting speed: 18–110 m/min Cutting diameter: 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: flat 300 x 180 mm Cutting capacity at 45°: round 210 mm Cutting capacity at 45°: square 190 mm Cutting capacity at 45°: flat 200 x 160 mm Cutting capacity at 60°: round 135 mm Cutting capacity at 60°: square 110 mm Cutting capacity at 60°: flat 130 x 100 mm Cutting capacity at 45° (right): round 180 mm Dodpfx Akjt I D Tuotskn Cutting capacity at 45° (right): square 160 mm Cutting capacity at 45° (right): flat 180 x 100 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 350 kg Space requirement: approx. 1700 x 900 x 2000 mm Manufacturer no.: 20437 Description: - Mitre cuts left up to 60° and right up to 45° - Quick-release vice, slideable in T-slot for fast repositioning - Hydraulic brake cylinder - Large, ball-bearing turntable for easy mitre adjustment (durable) - Swarf removal brush - Machine base with automatic coolant system - Lockable main switch, separate emergency-stop - EMC (Electromagnetic compatibility), accident prevention regulations (UVV) - Current consumption display (indicates saw blade wear progression, tool monitoring) - Automatic increased performance with the proven Berg & Schmid 3-stage AutoCut system

Tahun pembuatan: 1986, Kondisi: baik (bekas), nomor mesin/kendaraan: 106157, 21035 Dksdsg A Rgfepfx Akten