Lini bor throughput (pengeboran dan pemasangan)

PRIESS HORSTMANN BAT-RTW-CNC

Kondisi: sangat baik (bekas), CNC flexible line for drilling, milling, and dowel insertion BECKHOFF control (Windows-based software) Workpiece length min/max: 260 mm / 2500 mm Workpiece width min/max: 96 mm (*) / 1200 mm Workpiece thickness min/max: 13 mm / 25 mm (*) Minimum panel width for dowel insertion at the 3rd BAT: 120 mm Knedpfx Aey N Ucfec Hsa A) Platen feeder "Igel" for loading, with transverse infeed roller conveyor B) 1st pass CNC Mod. BAT-DTW - 2 drilling units, each with 21 spindles (2 x 2.2 kW) - 1 grooving saw (2.2 kW) - 2 grooving saws for back panel grooves (2 x 0.37 kW) - 2 drilling units, each with 12 spindles (2 x 2.2 kW) - 1 router for transverse shutter groove (4.4 kW) C) 2nd pass CNC Mod. BAT-DTW - 4 drilling units, each with 9 spindles (4 x 1.6 kW) - 2 angular drilling units, each with 3 spindles (2 x 1.6 kW) - 1 router (4.4 kW) - 2 drilling units, each with 5 spindles (2 x 1.6 kW) D) 3rd pass CNC Mod. BAT-DTW - 1 horizontal glue application device (with glue pump and 13-way air glue distributor) - 1 dowel insertion unit - Milling unit with 8-position tool changer (5 collets) - Drilling unit with 12 individually controlled twin spindles

Kondisi: baik (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: 2212.287, de Knsdpotk It Sofx Ac Hsa

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Kjdpfei Hn Srjx Ac Hsna Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 140 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 3.050 mm, panjang umpan sumbu Y: 1.250 mm, panjang umpan sumbu Z: 80 mm, frekuensi input: 50 Hz, arus masuk: 29 A, lebar kerja: 3.050 mm, Wir bieten Ihnen diese sehr gut erhaltene HOMAG DRILLTEQ V-500 Durchlaufbohrmaschine, Baujahr 2021, zum Verkauf an. Arbeitsbereich X 3.050 mm Arbeitsbereich Y 1.250 mm Arbeitsbereich Z 80 mm Anzahl Frässpindeln 1 Knjdpfx Acsylp Slo Hsa Hauptmotorleistung 10 kW Drehzahl max. 24.000 U/min Werkzeugaufnahmesystem HSK-F63 Werkzeugwechselplätze 4 Vertikale Bohrspindeln 15 Horizontale Bohrspindeln in X 6 Horizontale Bohrspindeln in Y 4 Nutschneidwerk um 90° schwenkbar Vertikale Arbeitsfläche Maschinentisch Durchlauftechnik Spezielle Werkstückspannvorrichtung Klemmgreifer Barcode-Scanner Sicherheitseinrichtung geschlossene Kabine Steuerung Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Konformitätskennzeichnung CE-Kennzeichnung Kategorie: Bearbeitungszentrum Typenbezeichnung: DRILLTEQ V-500 Subtyp: OPTIMAT BHX200 Maschinennummer: 0-250-73-7195 Schaltplan: 0-250-73-7195 Versorgungsspannung: 400Y/230 V Neutralleiter: vorhanden Phasen: 3 Frequenz: 50 Hz Maximaler Betriebs-Volllaststrom: 29 A Absicherung: 35 A Steuerspannung: 24 V Für weitere Informationen oder bei Fragen stehen wir Ihnen gerne zur Verfügung. Kontaktieren Sie uns telefonisch oder per Nachricht.

Kondisi: baik (bekas), Tahun pembuatan: 2016, nomor mesin/kendaraan: 0-250-95-3820, jam operasional: 13.696 h, Panjang benda kerja X: 200-3050 mm termasuk jalur rol Lebar benda kerja Y: 50-1250 mm Ketebalan benda kerja Z: 8-80 mm Kecepatan vektor: X/Y = 50 m/menit; Z = 15 m/menit Perlengkapan UNIT PENGGERAK BOR V 15 KECEPATAN TINGGI termasuk sistem penggantian cepat dan penjepit spindel UNIT PENGGERAK BOR HORIZONTAL DENGAN 6 SPINDEL ARAH X UNIT PENGGERAK BOR HORIZONTAL DENGAN 4 SPINDEL ARAH Y GERGAJI PLAT ARAH X-/Y 90° PEMERIKSAAN KONSISTENSI (X/Y) SPINDEL PENGGANTI ALAT 9 KW termasuk konverter Knsdozlbwfopfx Ac Hsa SISTEM PENGAMBIL 4 ARAH, Sisi SILINDER PENGGANJAL untuk pemosisian benda kerja SISTEM PENJEPIT BENDA KERJA SISTEM PENANGANAN BENDA KERJA PENGENDALI MESIN: POWERCONTROL dengan Powertouch PENGOPERASIAN MESIN: PERANGKAT LUNAK POWERCONTROL: WOODWOP; BASIS DATA ALAT; PENCATATAN DATA MESIN; PERANGKAT LUNAK DAFTAR PRODUKSI; PAKET OFFICE; IMPOR DXF WOODWOP BASIC; WOODASSEMBLER; SIMULASI 3D Tegangan operasi: 400 VOLT; Frekuensi: 50 HZ Fungsi penghemat energi

Kondisi: bekas, nomor mesin/kendaraan: 005910, Area kerja sumbu X: 2500 mm Kodpfxswuckho Ac Hona Area kerja sumbu Y: 1300 mm Daya spindle utama: 6 kW Jumlah sumbu yang dikontrol: 3 sumbu Jumlah spindle bor: 84

Kondisi: sangat baik (bekas), EN: FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGEBANDING AND FORMATTING LINE Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (RIGHT) FORMATTING AND EDGEBANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Roll material (edges) thickness (min/max) mm 0.3 / 3 Control / Software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 Jointing cutters with CNC-controlled 08.378 (4 motors x kW 4.5) Glue application unit (hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (No. 24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x kW 0.2) 0°-25° Pre-milling unit 08.055.0.1680 (1 x kW 0.85) Multiple profile milling unit (CNC-controlled) 08.0587 HS/LS1 (2 x kW 1) Contour milling unit (for fine trimming) CNC-controlled KFA x20 (1 x kW 0.5) 20 m/min Multiple profile scraper unit (CNC-controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x kW 0.18) No. 3 Universal milling units for grooving/rabbetting and profiling 08.190 (3 x kW 4.5) CNC-controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO" FR: LIGNE FLEXIBLE DE PRODUCTION PAR LOT-1 ET D'ENCOLLAGE/USINAGE DE CHANTS UNILATÉRALE Composée des machines suivantes : M.01) TABLE D'ALIMENTATION ET SYSTÈME AUTOMATIQUE DE RETOUR DES PIÈCES "SIRIO" BATCH SIZE ONE M.02) ENCOLLEUSE/USINEUSE DE CHANT UNILATÉRALE (droite) "IMA" Novimat I/R75/690/R3 Épaisseur panneau (min/max) mm 8 / 60 — Largeur de travail (min/max) mm 200 / 1300 Matériel rouleau (chants) épaisseur (min/max) mm 0,3 / 3 Commande / logiciel : ICOS Open (Batch Size One) Vitesse d'avance (réglable) m/min 6 – 30 Système d'introduction automatique de panneaux en mode format A1 / 15 N° 2 agrégats d'affleurage avec CN 08.378 (4 moteurs x kW 4,5) Kodpfskt Uuaox Ac Hjna Unité d'encollage (colle hot-melt + prémélangeur) VTG + 283.205 Magasin pour chants en rouleau (N° 24 positions) Unité de coupe-anglet terminale 08.42 / 30 / B / LS1 (2 x kW 0,2) 0°-25° Unité de pré-fraisage 08.055.0.1680 (1 x kW 0,85) Agrégat multifraise profil (CN) 08.0587 HS/LS1 (2 x kW 1) Unité de fraisage de contour (pour finition) CN KFA x20 (1 x kW 0,5) 20 m/min Agrégat racloir multi-profil (CN) 08.516 HS/LS1 Agrégat à racloir plat 08.521 Unité de polissage 08.617-2 (2 x kW 0,18) N° 3 agrégats universels pour rainurage, feuillurage et usinage de profil 08.190 (3 x kW 4,5) CN — 90°/180°/270° M.03) SYSTÈME D'ALIMENTATION ET DE GERBAGE "SIRIO"

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The DANIBRUM SIP series of brush sanding machines represents a comprehensive solution for the professional finishing of wooden panels, MDF, milled, or composite materials. Encompassing the SIP610, SIP810, SIP813, and SIP1013 models, the range covers the diverse requirements of woodworking workshops as well as medium and large industrial units. The SIP610 is an automated brush sander, designed with state-of-the-art technology to carry out precise finishing processes on both flat and profiled surfaces. The equipment is ideal for rounding sharp edges, cleaning surfaces from fine dust, as well as preparing workpieces for painting or lacquering. Whether used in a medium-sized workshop or integrated into an industrial production line, the SIP610 delivers consistent output and uniform finish quality with minimal manual intervention. High-quality brushes apply a controlled and adjustable pressure, enabling the efficient removal of imperfections without damaging the material. Equipped with a PLC control system and Romanian language touch-screen interface, the SIP610 is easy to operate, even for less experienced users. Predefined programs allow for quick adaptation to different material types. Thanks to SICK-brand encoders and the electric adjustment system for the sanding groups, extremely accurate positioning can be achieved, with tolerances as low as 0.1 mm. From solid wood to MDF and composite panels, the SIP610 is successfully used in a wide range of applications, consistently delivering superior results. - Individual electric adjustment for each sanding unit, allowing fine tuning based on the material - Rotating discs with bi-directional rotation and oscillation, ensuring complete coverage of the workpiece - Oscillating drums for synchronized movement, supporting uniform contact with the work surface - Fast Release system for sanding discs - Lateral extraction of sanding groups, simplifying maintenance and brush replacement - High-adhesion rubber conveyor belt with machined profile for optimal traction - Oscillation transmission via toothed belt and gear reducer, reducing vibration and noise - Linear guides with recirculating ball bearings for smooth and precise movement - Schneider electric components and XINJE frequency inverters, ensuring reliability and consistent control - Pivoting, ergonomic control panel for intuitive use from multiple positions - LED lighting for enhanced visibility in the working area Built on a heavy-duty steel frame, the SIP610 is engineered to withstand demanding industrial environments. Four vertical supports for each sanding group ensure evenly distributed pressure, contributing to reduced wear. Ksdewgw Tzjpfx Ac Hona While the SIP610 is recommended for medium-sized workshops or industrial facilities with constant production flows, the SIP810, 813, and 1013 are designed for more complex requirements or higher workloads. The models in the SIP range are equipped with similar digital control technologies, efficient extraction systems, and industrial-grade components. The SIP610, featuring automated functions, precision control, and adaptability to various panel types, is a reliable partner in any production environment. By expanding the range with the SIP810, SIP813, and SIP1013 models, the SIP series fully meets the needs of the modern wood industry. Technical support in Romanian - English - German

Kondisi: baik (bekas), Tahun pembuatan: 2007, lebar kerja: 800 mm, Mesin Poles Merek: Gottschild Tipe: HBS Tahun Pembuatan: 2007 Mesin poles high-gloss, sebelumnya digunakan untuk memoles permukaan dapur dan komponen furnitur kamar mandi. Lebar kerja: 800 mm 1 kepala polishing otomatis bergerak ke kanan dan kiri Motor polishing: 0,7/0,9 kW Area kerja dideteksi oleh sensor Lebar sabuk transportasi 820 mm x panjang 1950 mm Sabuk transportasi bergerak maju dan mundur Masing-masing satu roller conveyor di depan dan belakang sabuk: lebar 820 mm x panjang 1500 mm Daya terpasang: 2,2 kW / 400 V / 50 Hz Kedpfx Acexzqrqe Hsna Koneksi udara tekan: 6 bar

Kondisi: sangat baik (bekas), Flexible batch size 1 production and single-sided edge banding line (right) Kjdsinigmspfx Ac Hsna Consisting of the following machines: M.01) FEED TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control/Software PC 22 Feed speed (adjustable) m/min 18 - 32 Panel infeed system WZ 14/30 Jointing unit with CNC control (2 x Kw 3) DOUBLE gluing unit (PUR glue + premelter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for coil material (12 compartments) End trimming unit WK13 (CHAMFER / STRAIGHT, automatic adjustment) Pre-milling unit (2 x Kw 0.55) pneumatic adjustment Multifunction profile milling unit (CNC-controlled) MF 21 (2 x Kw 0.55) Profile copying milling unit FF 32 (4 x Kw 0.4) with automatic changeover device Contour trimming unit (for fine milling), CNC-controlled FK 31 (30 m/min) recently added after a technological retrofit Multi-profile scraping unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scraper + smoothing unit) FA 11 Universal milling unit for grooving/rabbeting and profiling UF 11 (1 x Kw 4) M.03) LOADING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S