Mesin pemotong laser

Prima Power CV 5000

Laser Machine
Prima Power CV 5000
Year of manufacture: 2016

3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000)

Average power output:
200 W – 5000 W

Peak power output:
Up to 6 kW

Wavelength:
10.6 microns

Beam quality factor (M²):
< 2.4 (typically 2.1 to 2.3)

Beam divergence:
1.5 mrad (half angle)

Output beam diameter:
15 mm 1/e², 21 mm full beam

Pulsed operation – Pulse repetition rate:
0 – 2 kHz

Pulse duration:
250 microseconds, 70 µs resolution

Alignment stability:
+/- 150 µrad

Operating conditions:
• Ambient temperature (max.): 40 °C
• Ambient temperature (min.): 10 °C
• Relative humidity: < 95 % (non-condensing)

Diode laser:
• Wavelength: 635 nm
• Output power: < 1 mW

⸻

3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000)

Electrical:
• Power requirement: 37 kW
• Voltage supply: 400 VAC – 460 VAC ±10 %, 3-phase

Cooling:
• Required cooling capacity: 45 kW
• Flow rate: 133 L/min (35 GPM)
• Inlet temperature: 18 – 20 °C
• Maximum inlet pressure: 6 bar
• Nominal inlet pressure: 3 bar
• Differential pressure: 1.5 bar
• Coolant: Distilled water with 35% Dowfrost HD
• Filtration requirement: 100 micron

Gas:
• Type / Purity / Mixture / Consumption:
• He: 99.996 % | 67.7 % | 13.4 – 46.8 SLPH
• CO₂: 99.995 % | 4.1 % | 0.9 – 3.0 SLPH
• N₂: 99.996 % | 28.2 % | 5.8 – 20.2 SLPH
• Total consumption: 20 – 70 SLPH (variable)
Lhsdpfoywwq Ujx Ag Red

Additional requirements:
• < 10 ppm water vapor, hydrocarbons and oxygen
• Air: dry – dew point < 2 °C
• Dependent on shutter usage

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.